Download Print this page

Pulsar King Kut V2 Instruction Manual

Electric grinder

Advertisement

Available languages

Available languages

Quick Links

SPECS
Size: 3.69 x 2.15 x 2.15" (9.37 x 5.48 x 5.48 cm)
Stainless steel blade
Battery Capacity: 370 mAh
Voltage: 4.2 V
Charging: USB-C
10 Minute Auto-Shut Off
KIT INCLUDES
1x Electric Grinder
1x Herb Jar
1x USB-C Charging Cable
1x Cleaning Brush
QUICK START
1. Press the button 5 times to turn on the device.
2. Once on, push the button 1 time to start grinding.
3. Push the button 1 more time to end the grinding at the desired consistency.
4. Push the button 5 times to turn the device off.
Note: The grinder will not engage without the jar attached.
INSTRUCTIONS
1. Before using the King Kut V2, fully charge the device using the included charging cable and a standard
charging brick.
2. Once the device is fully charged, remove the herb jar and place the herb inside. It is best to remove large
stems before grinding.
3. With the herb in the jar, turn the grinder body upside down and screw the jar into place.
4. Once the jar is secure, press the power button 5 times to turn on the grinder. You will see the green light blink
3 times to let you know the device is on. Press the power button 1 more time to start the grinding. While the
grinder is running, shake the grinder for more even results. If the grinding doesn't start immediately then the
jar may not be fully tightened.
5. Once the herb has reached your desired consistency, press the power button 1 time to stop the grinding.
6. To access the ground herb, turn the device over and gently tap the jar against your hand to move the ground
herb away from the blades. Then you can unscrew the jar from the grinder. Use the included cleaning brush to
remove any herb that is still left in the blade area.
7. To store any unused ground herb, simply screw the herb jar back onto the grinder and set the grinder down on
the jar so the herb stays at the bottom of the jar.
CLEANING
Herb can build up beneath the metal blade. It is recommended to periodically use the cleaning brush to clear
out any build up. Wash the herb jar by hand using water and a mild detergent. Allow the herb jar to air dry before
reassembly.
WARNINGS
Do not expose to extreme temperatures or direct sunlight. Do not drop the device or accessories. Do not drop or
submerge in any liquid. Do not modify the electronics in any way. This device is intended for adults only. Do not
sell or provide to minors. Keep all parts, concentrates, herbs, and liquids away from children and pets. This is not
a medical device and is not intended to diagnose, treat, mitigate, cure, or prevent any ailment, disease, or other
conditions. Consult a physician before use, especially if you suffer from heart disease or any other medical
condition, or if you are pregnant or breastfeeding. Failure to follow any of these instructions could result in
product damage, property damage, personal injury, and may void warranty. Visit
information.
INSTRUCTION
MANUAL
STAINLESS
STEEL BLADE
POWER
BUTTON
HERB JAR
CHARGING
PORT
PulsarShop.com
for warranty
PU-0705-24

Advertisement

loading
Need help?

Need help?

Do you have a question about the King Kut V2 and is the answer not in the manual?

Questions and answers

FREDRICK KOSANOVICH
June 8, 2025

mine seems to be blinking red when i try to turn it on

Summary of Contents for Pulsar King Kut V2

  • Page 1 Note: The grinder will not engage without the jar attached. INSTRUCTIONS 1. Before using the King Kut V2, fully charge the device using the included charging cable and a standard charging brick. 2. Once the device is fully charged, remove the herb jar and place the herb inside. It is best to remove large stems before grinding.
  • Page 2 CHARGEMENT DIRECTIVES 1. Avant d’utiliser le King Kut V2, chargez complètement l’appareil à l’aide du câble de recharge fourni et d’une brique de recharge standard. 2. Une fois l’appareil entièrement chargé, retirez la jarre à herbe et placez votre herbe à l’intérieur. Il est préférable d’enlever les grandes tiges avant de broyer.
Save PDF