Sylvania SCR1384 Instruction Manual

SYLVAN!A
SCR1384
LED ALARM CLOCK RADIO
INSTRUCTION MANUAL
SYLVANIA
LOCATION OF CONTROLS
I .Hour Button
2. Minute Button
3. Time Button
4. Power Cord
5.Speaker
6.Snooze Button
7. Alarm Set Button
8. FM Antenna
9.Sleep Button
10.AM/FM Band Selector
II .Tuning Control
12. Function Switch (ON/OFF/AUTO)
13. Volume Control
14. LED Display
15. Tuning Scale
16. ALM Indicator Power
17. Battery Compartment
POWER SUPPLY
Check the AC current is same as the instruction show on rating label of your unit and plugs the power cord
into the AC outlet. A blinking signal will appear indicating the time.
BATTERY BACKUP
Insert a 9 Volt battery in the battery compartment. Should there be a power failure , the clock will continue
to function. Your will not see this however because the battery does not illuminate the clock display. When
the electric power turns on again, the display will indicate the correct time. For clarity alarm clock does
not work on battery. Replace the battery once a year.
SPECIFICATIONS
1. Frequency Range: AM: 530~1700KHz
FM: 88-108MHz
2. Time Display Format: 12 Hours
3. Electric Power: 120V~60Hz
4. Battery Backup: 1 PC x 9V dry battery
WARNINGS
-The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc;
-No naked flame sources, such as lighted candles, should be placed on the apparatus;
-It shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus;
-Do not place the product in closed bookcases or racks without proper ventilation.
-Where the mains plug is used as the disconnect device, the disconnect device shall remain readily
operable.
SCR1384
LISTEN TO THE RADIO
Slide the Function Switch to ON position and rotate the Volume Control to turn on the radio. Adjust the
Volume Control to the desired listening level and select your favorite station with the Tuning Control and
Band Selector. To turn off the radio, slide the Function Switch to OFF position.
Loose the cable antenna for FM and adjust the direction to get the best reception if the radio could not
get a clear station.
TIME SETTING
Press andholdtheTimeSetButtonandthen press theHourorMinuteButtonforhourandminute
adjustment of the time. Please make sure setting time is AM or PM has indication (Adot will light in the
left upper corner indicating that the time is the PM range if your unit is 12 hour version type.)
WAKE TO MUSIC
Press and hold the Alarm Set Button and then press Hour or Minute button to set the desired wake up
time. Release the Alarm Set Button to show the current time. Repeat the steps of "LISTEN TO RADIO"
to your desired station and listening level. Slide the Function Switch to AUTO position. The Alarm
Indicator will on. The radio will play your desired station and listening level automatically at the preset
alarm time. Push the Function Switch to OFF position to turn off the radio alarm.
WAKE TO BUZZER
Same operation as "WAKE TO MUSIC" to adjust the alarm time, and then rotate the Volume Control
clockwise until a clicking sound is heard. Your will be awakened by the buzzer alarm.
Push the Function Switch to OFF position to turn off the buzzer alarm.
SNOOZE FUNCTION
When you want a few extra minutes of sleep after the alarm wakes you, press the Snooze Button, the
music or buzzer alarm will be off and turn on again in approximately 9 minute. Push the Function Switch
to OFF to turn off the snooze function.
SLEEPTO MUSIC
1 .Slide the Function Switch to the position either OFF or AUTO. Press the Sleep Button once and you
will have 59 minutes listen to the radio (the default setting).
2.If you want to increase or reduce the automatic shut off time, hold down the Sleep button and press
Hour or Minute to adjust as required. The maximum sleep time is 1 hour and 59 minutes.
SAFETY TIPS
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVIE PERSONNEL
THE LIGHTNING FLASH WITH ARROWHEAD
WITHIN ATRIANGLE IS INTENDED TO TELL
THE USER THAT PARTS INSIDE THE
PRODUCT ARE A RISK OF ELECTRIC SHOCK
TO PERSONS.
THE EXCLAMATION POINT WITHIN ATRIANGLE IS
INTENDED TO TELL THEUSER THAT IMPORTANT
OPERATING AND SERVICING INSTRUCTIONS ARE IN
THE PAPERS WITH THE APPLIANCE.
"WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO (RAIN)
(WATER) (WET LOCATION)"
"CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT."
CAUTION : PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS CONTAINED IN THIS OWNER'S
INSTRUCTION MANUAL AND THOSE ON YOUR APPLIANCE. RETAIN THIS INSTRUCTION MANUAL FOR FUTURE
REFERENCE.
THIS UNIT HAS BEEN ENGINEERED AND MANUFACTURED TO ASSURE YOUR PERSONAL SAFETY. HOWEVER,
IMPROPER USE CAN RESULT IN ELECTRICAL SHOCK OR FIRE HAZARDS. IN ORDER NOTTO DEFEATTHE SAFE¬
GUARDS INCORPORATED IN THIS UNIT, OBSERVE THE BASIC RULES FOR ITS INSTALLATION, USE AND
SERVICING AS DESIRED IN THIS MANUAL. THIS UNIT MEETS ALL UNDERWRITERS LABORATORY (UL & CUL)
SAFETY REQUIREMENTS. THIS UNIT DOES NOT CONTAIN ANY USER SERVICEABLE PARTS. REMOVAL OF THE
CABINET MAY EXPOSE YOU TO DANGEROUS VOLTAGES. REFER ALL SERVICING TO QUALIFIED SERVICE
PERSONNEL.
TO GO TO SLEEP AND WAKE TO MUSIC
Repeat the steps of "WAKE TO MUSIC", press Sleep Button to set for desired time of radio playing before
sleep. The radio will stop as your setting of sleep time automatically and will play again at your preset
wake up time.