Home Accents Holiday 23RT01223112 Use And Care Manual

Safety Information
CAUTION:
Grasp the plug to insert or remove from the power source. Do not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 7.2 Watts (0.06 Amps). Do not overload. Do not connect to another
lighting string, decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or
return to place of purchase with purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the
socket enclosures, loose connections, exposed copper wire or other obvious damage.
Pre-Assembly
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting
string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended
to assemble parts of the product while lying flat on the ground or a flat surface, versus standing the item up to
assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service
center or return to place of purchase with purchase receipt,1-855-HDHoliday (1-855-434-6543)
Assembly of this product may require more than one person.
PACKAGE CONTENTS
C
G
F
D
E
Assembly
1
Assembling the Lower Body
Align the two Halves of Lower Body (E) with each other then
insert the connecting rods on one half into the connecting holes
on the other half and fasten at the connecting loops with Plastic
Ties (M).
M
3
Assembling the Upper & Lower Body together
Insert the connecting rods at the bottom of Upper Body (D) into the
connecting holes at the top of the Lower Body (E) and fasten at the
connecting loops with Plastic Ties (M).
Use and Care Guide
6 ft Polar Wishes LED
Snowman with Broom
A
H
B
F
I
J
O
E
D
E
M
Part
A
K
B
C
D
E
L
F
G
H
M
I
J
K
L
M
N
N
O
2
Assembling the Upper Body
Align the two Halves of Upper Body (D) with each other then
insert the connecting rods on one half into the connecting
holes on the other half and fasten at the connecting loops with
Plastic Ties (M).
4
Assembling the Head and Nose
Insert the connecting rods at the bottom of Head (B) into the
connecting holes at the top of the Upper Body (D) and fasten
at the connecting loops with Plastic Ties (M). Insert the
connecting rods on the Nose (C) into the connecting holes on
the front of the Head (B).
Please contact 1-855-HD-HOLIDAY (1-855-434-6543) for further assistance.
Item # 1009537861
Model # 23RT01223112
TOOLS REQUIRED
Plier
Description Quantity
Hat
Head
Nose
Upper Halves of Body
Lower Halves of Body
Arm / Hand
Scarf
Broom Head
Upper Broom Handle
Lower Broom Handle
Spare Bulb
Spare Fuse
Plastic Tie
Ground Stake
Anchoring String
D
M
C
B
M
D
HOMEDEPOT.COM
1
1
1
2
2
2
1
1
1
1
3
2
20
8
4