Advertisement
Solar Panel HA0241 & HA0242
Introduction
The ShoreStation Solar Panel is specifically designed to provide reliable, trouble-free charging and maintenance of
your ShoreStation lift battery. Proper installation of this charging system will maximize your charger's performance
and will ensure your battery maintains a sufficient charge for your lift system. This manual will provide you with
information on the proper installation of your solar panel.
WARNING
DO NOT ATTEMPT TO ASSEMBLE THIS SYSTEM WITHOUT FIRST STUDYING THIS MANUAL AND
INFORMATION ON LABELS INCLUDED WITH THE SYSTEM. FAILURE TO DO SO CAN LEAD TO IMPROPER
OPERATION RESULTING IN SERIOUS PERSONAL INJURY AND/OR PRODUCT DAMAGE. IF YOU HAVE
FURTHER QUESTIONS AFTER REVIEWING THIS INFORMATION, CONTACT A SHORESTATION
REPRESENTATIVE AT (800) 859-3028.
Midwest Industries, Inc.
Page 1 of 11
Fits Revolution Canopy Frames
Ida Grove, IA 51445
800-859-3028
www.shorestation.com
0004623
7-8-20
Advertisement
Table of Contents
Summary of Contents for ShoreStation HA0241
- Page 1 Fits Revolution Canopy Frames Introduction The ShoreStation Solar Panel is specifically designed to provide reliable, trouble-free charging and maintenance of your ShoreStation lift battery. Proper installation of this charging system will maximize your charger’s performance and will ensure your battery maintains a sufficient charge for your lift system. This manual will provide you with information on the proper installation of your solar panel.
-
Page 2: Safety Instructions
Never work alone and observe safe lifting practices such as team lifting and proper lifting posture. • Do not modify the equipment unless you have received direct written approval from the manufacturer (ShoreStation) • Remove all jewelry and any conductive items from your body before working with DC system •... -
Page 3: Left Side
Model HA0241 (24V) HA0242 (12V) Rated Max Power (Pmax) Current at Pmax (Imp) 1.2A Voltage at Pmax(Vmp) 33.0V 17.1V Short Circuit Current (Isc) .65A 1.25A Open-Circuit Voltage (Voc) 40.0V 21.0V Normal Operating Cell Temp (Tnoct) 45˚C (113˚F) 45˚C (113˚F) Weight 2.5kg (5.51lbs) - Page 4 Adjust the bracket assembly side to side as needed and tighten the nuts. (Example shown below would be mounted on the left side) Bottom Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004623 Page 4 of 11 7-8-20...
-
Page 5: Step #3 - Attach Mounting Bracket
Line up the top two holes of the plastic end part with the black mounting bracket. Insert two black plated carriage bolts, add the washers on the backside, and tighten the locknuts. Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004623 Page 5 of 11 7-8-20... -
Page 6: Step #7 - Angle Adjustment
There are many online resources with good information on pointing techniques to use if you live in a different region or will be using the lift all year. Example = 30° Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004623 Page 6 of 11 7-8-20... - Page 7 On 24V systems, the battery harness must be connected to the ‘outside’ terminals of the 24V series as shown. Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004623 Page 7 of 11 7-8-20...
- Page 8 Solar Charge Regulator Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004623 Page 8 of 11 7-8-20...
- Page 9 Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004623 Page 9 of 11 7-8-20...
- Page 10 Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0004623 Page 10 of 11 7-8-20...
-
Page 11: Care And Maintenance
Even if the panel is not pointed perfectly, it can easily produce the charging current required for storage. ShoreStation Electric and Hydraulic system have wireless controllers that will draw a small amount of current from the battery, even when the lift is not in use. In most cases, the motor should be disconnected from the battery to eliminate this power draw during the off season.
Need help?
Do you have a question about the HA0241 and is the answer not in the manual?
Questions and answers