URBAN OUTFITTERS GUMBALL Assembly Instructions

URBAN OUTFITTERS
GUMBALL FLOOR LAMP
Assembly Instructions
NO ADDITIONAL TOOLS REQUIRED
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
Use a 40W (MAX) Type G incandescent bulb or a 6W LED bulb.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
(D) Base
(B) Middle Pole (C) Lower Pole
(A) Upper Lamp Body
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
03.16.2024 Page 1 of 2
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.