Freestyle SHARK CX4 Instructions

cs
Freestule
#709 SHARK CX4™
WATCH INSTRUCTIONS
FEATURES:
e CURRENT TIME
e DAY/MONTH/DATE
* CHRONOGRAPH
e LARGE DIGIT DISPLAY
e DAILY ALARM
e TWO TIMERS
e OPTIONAL 24-HOUR TIME
e WATER-RESISTANT TO
330FT/100M
e NIGHT VISION™
ILLUMINATION
KEY REFERENCES
In normal time mode, the button
functions are as follows:
LIGHT - Turns on the Night Vision™
S1 - Lap/Reset and to select digits
S2 - Start/Stop and to set function
S3 - Changes the function
HOW TO SET NORMAL TIME
In normal time mode, push the S3
button seven times. The seconds
digits will begin to flash. Push the
S2 button to reset the seconds to
zero.
Press the S1 button to set the
minutes. When the first minute digit
flashes, press the S2 button to
advance the digits. Press the S1
button again. When the second
minute digits flash, press the S2
button to advance the digits.
Press the S1 button again to set
the hours. When the hour digits
flash, press the S2 button to
advance the digits.
Press the S1 button again to set
the date. When the date digits flash,
press the S2 button to advance the
digits.
Press the S1 button again to set
the month. When the month digits
flash, press the S2 button to
advance the digits.
Press the S1 button again to set
the day. When the day digits flash,
press the S2 button to advance the
digits.
24 - HOUR SETTING
To toggle between 12 and 24-hour
modes, press the S1 button seven
times and then press the S2 button.
24H or AM/PM will be displayed on
the screen. Press the S3 button to
return to the normal time display.
SETTING DUAL TIME
From normal time mode, press the
S3 button six times to enter the dual
time setting mode. Press the S1
button to flash the hour digits.
Advance the hour digits by pressing
the S2 button. After setting dual
time, push the S3 button twice to
return to normal time mode.
HOW TO SET TIMERS
In normal time mode, push the S3
button four times to set Timer 1. To
set Timer 2, press S3 five times from
normal time mode. To set these
timers, press the S1 button to flash
the hour digits. Advance the hour
digits by pressing the S2 button.
Press the S1 button again to flash
the first minute digit. When the digits
flash, press the S2 button to
advance them. Press the S1 button
again to flash the second digit of
the minutes. Press the S2 button
advance the digits. Push the S1
button again to set the timer. Press
the S2 button to start and stop the
countdown timers.
SETTING THE DAILY ALARM
From normal time mode, press the
S3 button once to enter AL 1 setting
mode. Press the S1 button to flash
the hour digits. Advance the digits
by pressing the S2 button. Press
the S1 button to flash the first minute
digit. Advance by pressing the S2
button. Press the S1 button again
to flash the second minute digit.
Advance the digits by pressing the
S2 button.
To turn AL1 on and off, push the S3
button once from normal time mode.
AL1 will appear on the screen. Push
the S2 button to toggle between on
and off.
SETTING THE SINGLE
ALARM
From normal time mode, press the
S3 button twice to enter the AL2
setting mode. Push the S1 button
to flash the hour digits. Advance
the digits with the S2 button. Push
S1 button again to flash the first
minute digit. Advance with the S2
button. Press the S1 button again
to flash the second minute digit.
Advance with the S2 button.
To turn AL2 on and off, push the S3
button twice from normal time mode.
AL2 will appear on the screen. Push
the S2 button to toggle between on
and off.
CHIME SETTINGS
To turn the chime on and off, hold
the S2 button down in normal time
mode. While holding the S2 button
down, press the S1 button to turn
on the chime, represented by a "bell"
icon. Press the S1 button again to
turn off the chime.
USING THE CHRONOGRAPH
In normal time mode, press the S3
button three times to enter the
chronograph mode. Push the S2
button to start and stop the
chronograph. To record a lap time,
press the S1 button while the
chronograph is running. The lap
time will appear on the display while
the chronograph continues to run.
Press the S1 button again to return
to the chronograph. When the
chronograph is stopped, press the
S1 button to reset it back to zero.
HOW TO OPERATE THE
NIGHT VISION™
Press the LIGHT button to activate
the Night Vision™ illumination. The
light will remain illuminated for
approximately four seconds.
CARE AND MAINTENANCE
1. Back case cover should only be
removed by an authorized watch
repair specialist.
2. Always rinse your watch in fresh
water after immersion in salt or
chlorinated water.
3. Do not expose watch or band to
chemicals such as gasoline, aerosol
sprays, paint or solvents.
4. Periodically clean with a soft cloth
and fresh water.
WARRANTY INFORMATION
FreeStyle warrants, to the original
purchaser, that its watches are free
from defects in materials and
workmanship for a period of ten
(10) years under normal use. The
warranty excludes batteries, crystal,
watch case plating, and strap/
bracelet/ band. The warranty
excludes normal wear and tear and
abuse.
Special note: FreeStyle® watches
are designed and engineered to be
highly water-resistant, and to
withstand the most active of
lifestyles. The most important
component in keeping your watch
water-resistant is the case back O-
ring, which prevents water from
entering the watch through the case
back.
Water leakage most often occurs
after improper battery replacement.
We strongly recommend having a
certified jeweler, watch repair
technician or FreeStyle's service
center replace your battery. Water
leakage due to improper battery
replacement is not covered under
warranty.
Should your FreeStyle® watch
require warranty service, send it
along with the following:
1. Acopy of your sales receipt
2. Your printed name and address
3. Your telephone number
4. A brief description of the problem
5. Include $8.50 for processing
and handling, using one of the
following payment methods:
-Check
-Money order
-Credit card (be sure to include
card number and expiration date)
REMEMBER: NEVER INCLUDE A
SPECIAL WATCHBAND OR ANY
OTHER PERSONAL ARTICLES
OF VALUE IN YOUR SHIPMENT.
Send to the following address:
FreeStyle
Attn: Individual Returns
47-50 33rd Street
Long Island City, NY. 11101
Phone: 718-729-8890
Please allow 30 days for return of
your watch.
Neither this warranty, nor any other
warranty expressed, is assumed for
any incidental or consequential
damages, including but not limited
to the mathematical accuracy of the
product. Some states do not allow
limitations on how long an implied
warranty lasts, or the exclusions of
or limitations on consequential
damages, so the above limitations
may not apply to you. This warranty
gives you specific legal rights, and
you may have other rights which
vary from state to state.
This warranty applies to watches
purchased in the United States.
For watches purchased outside the
United States, please contact your
authorized FreeStyle® dealer for
warranty information.
If your watch requires servicing not
covered under our warranty (battery,
crystal, strap/bracelet/band, watch
case plating), or refurbishing,
complete the return form (next
column) and return with your watch.
Be sure to include a check, money
order or credit card information for
desired replacement parts. Please
include $8.50 for processing and
handling.
Visit our website at:
www.freestyleusa.com