Asus XG27ACMG Service Manual
Asus XG27ACMG Service Manual

Asus XG27ACMG Service Manual

Hide thumbs Also See for XG27ACMG:

Advertisement

Monitor Service Manual
Model: XG27ACMG
Version no.: 0
Release date: 2024/5/28
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XG27ACMG and is the answer not in the manual?

Questions and answers

Summary of Contents for Asus XG27ACMG

  • Page 1 Monitor Service Manual Model: XG27ACMG Version no.: 0 Release date: 2024/5/28...
  • Page 2 ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
  • Page 3: Table Of Contents

    Table of Contents 1. Safety Precautions ......................4 2. Exploded View ........................5 3. Disassembly and Assembly Procedures................ 6 Disassembly SOP ...................... 6 Assembly SOP ......................10 4. Trouble Shooting ......................13...
  • Page 4: Safety Precautions

    1. Safety Precautions FOR PRODUCTS CONTAINING LASER: DANGER- Invisible laser radiation when open. AVOID DIRECT EXPOSURE TO BEAM. CAUTION- Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION- The use of optical instruments with this product will increase eye hazard. TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF THIS SERVICE MANUAL...
  • Page 5: Exploded View

    2. Exploded View Item Description Q'ty PANEL MIDDLE FRAME FLIM PROTECTIVE LENS BOARD CTRL BOARD HOLDER #SCRW MACH FLATM3*0.5P*4.5L ZN LED DRIVER BOARD MAIN BOARD ASSY Shielding #SCRW PT PH W/FL M3*8 B-ZN ASSY LIGHT MODULE CTRL BOARD HOLDER KEY BOARD BACK COVER ASSY CVR IO STAND ASSY...
  • Page 6: Disassembly And Assembly Procedures

    3. Disassembly and Assembly Procedures Disassembly SOP Preparation before disassemble 1. Clean the room for disassemble 2. Identify the area for monitor 3. Check the position that the monitors be placed and the quantity of the monitor; prepare the area for material flow; according to the actual condition plan the disassemble layout 4.
  • Page 7 6) Unlock the screws*2 and 1 tape to disassemble Key Board from the Rear Case. Screw: (SCRW TAP CAP Torque for M3*1.34P*8L B-ZN) screw: 4.5±0.5Kg/cm 7) Disassemble Key Board from the Key Board cover. 8) Pull off the Key Board cable from the Key Board.
  • Page 8 1) Tear off the tapes and pull off lamp wire from panel and Main Board/LED Driver Board. 2) Remove the shielding from Panel. Screw Torque : driver 4.0±0.5Kg/cm 3) Unlock 9 screws and disassemble Middle Frame from panel. Screw: (#SCRW MACH FLATM3*0.5P*4.5L ZN) 1) Disassemble Lens Board and FFC Cable...
  • Page 9 1) Pull out wire from Main Board and LED Driver Board. MAIN BOARD NOTE: Circuit boards >10 cm² has been highlighted with the yellow rectangle as above image shows. Please detach the Circuit boards and follow local regulations for disposal.
  • Page 10: Assembly Sop

    3.2 Assembly SOP Preparation before assemble 1. Clean the room for work 2. Identify the area for material 3. Prepare the implement, equipment and materials as bellow: 1) Working table 2) Screw-driver 3) Glove 4) Cleaning cloth 5) ESD protection After unplugging the power cord, the power Board still have power energe.
  • Page 11 1) Assemble Middle Frame to panel and lock 11 screws. Screw: (#SCRW MACH FLATM3*0.5P*4.5L ZN) 2) Insert FFC Cable to Lens Board and assemble Lens Board to Middle Frame. Screw Torque: driver 4.0±0.5Kg/cm 3) Assemble shielding on the Panel. 4) Insert LVDS Cable to Panel.
  • Page 12 Assemble Key Board to Key Board Cover. Assemble Key Board to Rear Case and lock 2 screws &1 tape. Screw: (SCRW TAP CAP Torque for M3*1.34P*8L B-ZN) MF screw: 4.5±0.5Kg/cm Insert Key Board cable & LED-Module Wire to Main Board. Assemble Rear Case to monitor.
  • Page 13: Trouble Shooting

    4. Trouble Shooting...

Table of Contents