thomann t.bone MB 7 Beta Quick Start Manual

Quick start guide
This document contains important information on the safe use of the product. Read and follow the safety instructions and all other instruc-
tions. Keep the document for future reference. If you pass the product on to others, please include this document.
Contents are subject to change. Please refer to the latest version of the documentation, which is available for download at www.thomann.de.
Safety instructions
Intended use
This device is used to convert acoustic signals into electrical signals.
Any other use or use under other operating conditions is considered
to be improper and may result in personal injury or property dam-
age. No liability will be assumed for damage resulting from improper
use.
This device may be used only by persons with sufficient physical,
sensory, and intellectual abilities and the necessary knowledge and
experience. Other persons may use this device only if they are su-
pervised or instructed by a person who is responsible for their safety.
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small
parts. Children can injure themselves when handling the de-
vice. Never allow children to play with the packaging material
and the device. Always store packaging material out of the
reach of babies and small children. Always dispose of pack-
aging material properly when it is not in use. Never allow chil-
dren to use the device without supervision. Keep small parts
away from children and make sure that the device does not
shed any small parts (such as knobs) that children could play
with.
Damage to the device if operated in unsuitable ambient conditions!
The device can be damaged if it is operated in unsuitable
ambient conditions. Only operate the device indoors within
the ambient conditions specified in the "Technical specifi-
cations". Avoid operating it in environments with direct sun-
light, heavy dirt and strong vibrations. Avoid operating it in
environments with strong temperature fluctuations. If tem-
perature fluctuations cannot be avoided (for example after
transport in low outside temperatures), do not switch on the
device immediately. Never subject the device to liquids or
moisture. Never move the device to another location while it
is in operation. In environments with increased dirt levels (for
example due to dust, smoke, nicotine or mist): Have the de-
vice cleaned by qualified specialists at regular intervals to
prevent damage due to overheating and other malfunc-
tions.
Features
ƒ Dynamic broadcast microphone
ƒ Suitable for broadcasts, podcasts, studio etc.
ƒ Kidney characteristic reduces feedback
General handling
ƒ To prevent damage, never exert force while operating the
device.
ƒ Never immerse the device in water. Wipe only with a clean and
dry cloth. Do not use liquid cleaners such as benzene, thinners or
flammable cleaning agents
ƒ Never remove the screen of the microphone! This action could
damage the sensitive microphone capsule.
ƒ Prevent the microphone from falling down, as this can cause
serious damage!
ƒ After every use, remove the microphone from the holder and
place it in its transport packaging.
Keep the device away from impurities!
Keep the device away containers with liquid. If any liquid penetrates
the device, this could destroy the device or cause a fire. Be aware
that no metallic parts come inside the device.
ƒ Installed pop filter and shock mount for reducing vibration
noises
ƒ Shielded from electromagnetic interferences
EN
MB 7 Beta