Page 2
MODEL GENERAL 1. Each VAV unit and accessory is shipped with an MAX. CFM/MIN. CFM identification label showing the Carnes order number, MARK unit item number from the order, unit model number, maximum and minimum CFM settings on terminal units with pressure independent control options, and unit tagging (or mark).
Page 3
DUCT CONNECTIONS ATTENUATOR, SINGLE DUCT RECTANGULAR HOT WATER COIL DUCT (All Field FIELD or FACTORY Mounted) 1. Units are provided with slip and drive discharge duct MOUNTED connections. BASIC UNIT 2. It is suggested that discharge ductwork be lined with a minimum of 1/2”...
Page 4
4. If supply connections are for 250 volts or greater, all wiring must be insulated for 600V. 5. All field and factory made connections should be checked for tightness before operation. 448 South Main Street Phone: 608/845-6411 carnes@carnes.com P. O. Box 930040 Fax: 608/845-6470 www.carnes.com COMPANY...
Need help?
Do you have a question about the AVCD and is the answer not in the manual?
Questions and answers