Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for NAX RM Series
- Page 1 RM Series Handheld Thermal Camera User Manual V1.0.0...
-
Page 2: Table Of Contents
RM Series Handheld Thermal Camera·User Manual Table of Contents 1. Safety Information ............................1 2. Product Introduction ..........................2 2.1 Camera (View from the front) ......................2 2.2 Buttons (View from the rear) ......................3 2.3 Connector and Memory Card ......................4 3. - Page 3 RM Series Handheld Thermal Camera·User Manual 5.13.8 Analyze Settings .........................25 5.13.9 Dual-spectrum Alignment ....................27 5.13.10 Automatic Power-off ......................28 5.13.11 System Settings ........................28 6. Technical Data ............................30 6.1 RM200A ............................30 6.2 RM200F ............................32 6.3 RM305 .............................34 6.4 RM320 .............................36 6.5 RM315 .............................39...
-
Page 4: Safety Information
RM Series Handheld Thermal Camera·User Manual 1. Safety Information WARNING Make sure you read all applicable Material Safety Data Sheets (SDS) and warning labels on containers before you use a liquid. The liquids can be dangerous. Injury to persons can occur. -
Page 5: Product Introduction
RM Series Handheld Thermal Camera·User Manual 2. Product Introduction 2.1 Camera (View from the front) Components Infrared Lens Digital Camera Laser Pointer Trigger Table 2.1 Introduction to Camera Components Note: The lens cap has the following laser warning label attached. -
Page 6: Buttons (View From The Rear)
RM Series Handheld Thermal Camera·User Manual 2.2 Buttons (View from the rear) Components Function Description Display screen Press to open the gallery. Long press to perform image Gallery button uniformity correction. Make selections for the menu, settings, gallery by Navigation button clicking up/down/left/right. -
Page 7: Connector And Memory Card
RM Series Handheld Thermal Camera·User Manual 2.3 Connector and Memory Card Name Description Connect a USB cable with the power adapter for charging. USB Interface Connect a USB cable to a computer to charge or transfer data. Standard MicroSD card, standard 32GB, it can save ... -
Page 8: Quick Start Guide
RM Series Handheld Thermal Camera·User Manual 3. Quick Start Guide Please follow the procedures: 1.Charging (1) Power adapter and USB cable can be used to charge the device. (2) You can charge the device by connecting the USB cable in the accessory to the computer. -
Page 9: User Interface
RM Series Handheld Thermal Camera·User Manual 4. User Interface Figure4.1 User Interface Name Description parameters, measurement mode, image mode, Main Menu color palettes and other settings can be set. specific options can be set, such as a specific Sub Menu color palette. -
Page 10: Operation Instruction
RM Series Handheld Thermal Camera·User Manual 5. Operation Instruction 5.1 Charging 5.1.1 Charge with a Power Adapter 1. Plug the power adapter into the socket. 2. Use a USB cable to connect the adapter and the camera to charge. Note: It takes about 3h to get the device fully charged. -
Page 11: Focus Adjustment
RM Series Handheld Thermal Camera·User Manual 5.3 Focus Adjustment (Only available for some models) Make sure that the device is powered on, align the camera at the measured scene, rotate the focus ring beside the lens clockwise or counterclockwise, which can make the image clearer via focal length adjustment, see the following figure for the detailed adjustment method: Figure 5.1 Focus Adjustment Through Focus Ring... -
Page 12: View Photos/Videos
RM Series Handheld Thermal Camera·User Manual 5.5 View Photos/Videos The images you captured are saved in the SD card, and you can follow the below steps to view them at any time: 1. Enter the photo gallery by clicking gallery button. -
Page 13: Measurement Mode
RM Series Handheld Thermal Camera·User Manual 5. When in the preview interface, click the multiple button in the upper right corner of the screen, then select the picture or video to be deleted, and delete the selected items by pressing the delete button. -
Page 14: Measurement Parameters
RM Series Handheld Thermal Camera·User Manual 5.7 Measurement Parameters In the observation interface, press OK to enter the main menu, use the navigation button to select the parameter setting , then press OK again to enter the secondary menu. Select different temperature measurement parameters by shifting left or right, and press the enter button to parameterize. - Page 15 RM Series Handheld Thermal Camera·User Manual Ambient temperature : the reflection temperature of the object surface will affect the measurement result, especially when the object emissivity is low or the object temperature and the reflection temperature differ greatly, this effect will increase. So, the result needs to be compensated to eliminate influences of the surface reflection temperature.
-
Page 16: Palettes
RM Series Handheld Thermal Camera·User Manual 5.8 Palettes In the observation interface, short press OK to enter the main menu, and select palette setting with the navigation button. Press OK again to enter the sub menu, select different palettes by shifting left and right on the navigation button, and then press the enter button to save your option. - Page 17 RM Series Handheld Thermal Camera·User Manual Thermal Fusion: an image fused to a certain scale between an infrared image and a visible image. PIP: infrared image superimposed at the center of the visible image. Thermal imaging: infrared images.
-
Page 18: Setting Steps
RM Series Handheld Thermal Camera·User Manual Digital camera: visible images. Note: For better dual-light image effects, when in DDE, PIP or thermal fusion modes, you need to set the actual distance, that is, the approximate distance from the thermal camera to the object. If the preset alignment parameters cannot meet the requirements, you can also manually perform fusion alignment in the settings or drag on the touch screen. -
Page 19: Non-Uniformity Correction
RM Series Handheld Thermal Camera·User Manual 5.10 Non-uniformity Correction 5.10.1 Non-uniformity Correction Introduction Non-uniformity correction is used to compensate for non-uniformity of detector pixels or non-uniformity caused by other optical interference. If there is more noise in the image, non-uniformity correction is needed, which is common when the ambient temperature changes rapidly. -
Page 20: Digital Zoom
RM Series Handheld Thermal Camera·User Manual The lower limit of the temperature scale is manually adjusted as 27.7℃: Press A in the upper right corner of the interface to return to auto-contrast mode. The upper limit and lower limit are auto adjusted according to the Max. temp and Min. temp in the auto mode, the image color is distributed based on the color of the temperature scale. - Page 21 RM Series Handheld Thermal Camera·User Manual 2×digital zoom: 4×digital zoom: 8×digital zoom: Note: This function can be enabled only in IR mode or Visible mode.
-
Page 22: Other Settings
RM Series Handheld Thermal Camera·User Manual 5.13 Other Settings Other settings include date and time, unit, and other items. 1) In the observation interface, press OK shortly to enter the main menu, and select Settings to enter other settings. 2) In the observation interface, tap anywhere on the screen to enter the main menu, and tap Settings to enter other settings. -
Page 23: Above/Below Temperature Alarm
RM Series Handheld Thermal Camera·User Manual 5.13.2 Above/Below Temperature Alarm Alarm temperature setting: 1.High temperature alarm switch: click to enable or disable the function of high temperature alarm. Temperature setting for high temperature alarm: click on the pop-up keyboard and set the alarm temperature, 120℃... -
Page 24: Cloud Service
RM Series Handheld Thermal Camera·User Manual 5.13.3 Cloud Service After opening, click the register button and follow the prompts to complete the registration. After registering, enter your username, password, and device name, then click login to bind the device to your cloud service account. -
Page 25: Photo Settings
RM Series Handheld Thermal Camera·User Manual 5.13.5 Photo Settings Auto save of manual snapshot switch: click to enable or disable the function of auto save of manual snapshot, disabled by default. Time-lapse snapshot: click to enable or disable the function of time-lapse snapshot. -
Page 26: Smart Patrol Inspection
RM Series Handheld Thermal Camera·User Manual 5.13.7 Smart Patrol Inspection (This function is only available for some models) 1. By selecting different modes, you can help operations collect images according to preset task packages. The software can automatically standardize the naming of images. Click 'General' or 'Electric Power' to freely switch between the two modes. - Page 27 RM Series Handheld Thermal Camera·User Manual 2.Long press the patrol task to import new patrol tasks, delete the selected patrol task, select all patrol tasks or quit. 3.Method of making smart capure package: Users can fill in the file with the equipment that needs to be photographed according to the template ...
-
Page 28: Analyze Settings
RM Series Handheld Thermal Camera·User Manual 5.13.8 Analyze Settings (This function is only available for some models) Temperature measurement lines: temperature trend display can be enabled, disabled by default. The following is an illustration of temperature measurement line. Temperature measurement areas: the Max. temperature, the Min. temperature and the AVG ... - Page 29 RM Series Handheld Thermal Camera·User Manual Isotherm: click to enable or disable the function of isotherm, disabled by default. The Max and Min of isotherm value can be self-defined; the image in a certain temperature range can be selected and auto fill the image color according to the temperature scale to better view the temperature distribution of a certain interested temperature range.
-
Page 30: Dual-Spectrum Alignment
RM Series Handheld Thermal Camera·User Manual 5.13.9 Dual-spectrum Alignment Dual-spectrum Fusion Alignment This function can be used to manually register infrared and visible images. First select coarse tuning and fine tuning, and then perform image alignment through navigation buttons. After finished, click OK or enter button to save the settings. -
Page 31: Automatic Power-Off
RM Series Handheld Thermal Camera·User Manual 5.13.10 Automatic Power-off 5Min: click to perform auto shut down after 5 minutes. 10Min: click to perform auto shut down after 10 minutes. 20Min: click to perform auto shut down after 20 minutes. - Page 32 RM Series Handheld Thermal Camera·User Manual 5. Formatting the SD Card Click and then press OK to format the SD card as exFAT. 6. USB Mode There are two options for data transmission: U disk and USB camera. U disk mode: the saved images and videos can be read and analyzed when the camera is ...
-
Page 33: Technical Data
RM Series Handheld Thermal Camera·User Manual 6. Technical Data 6.1 RM200A Thermal Module Detector Type VOx Uncooled FPA detector Resolution of Detector 256*192 Response Band 8~14μm Pixel 12μm NETD 40mK IFOV 3.8mrad Frequency 25Hz Focus 3.2mm 56°*42° Focus Mode Fixed Temperature Measuring -20 ℃~150℃, 100℃~ 550 ℃... - Page 34 RM Series Handheld Thermal Camera·User Manual Temperature Scale Manual/Auto Laser Pointer Available Visual Camera 2 MP XX-IR.jpg (thermal image with temperature data) and Image Capture XX-DC.jpg (visual image), short press the trigger to capture image Set time interval and number of image captures...
-
Page 35: Rm200F
RM Series Handheld Thermal Camera·User Manual Weight About 635g (incl. Battery) Certificate CE/RoHS/WEEE/Calibration Certificate/DGM 5V2A power adapter, battery charger, battery×2, USB Accessories cable, SD card, Quick Start Guide, Calibration Certificate, Packaging List, Portable Bag 6.2 RM200F Thermal Module Detector Type... - Page 36 RM Series Handheld Thermal Camera·User Manual 10 (Whitehot, Blackhot, Iron, Lava, Rainbow, Color Palettes Rainbow HC, Blackred, Purple-orange, Special, Special 2) E-zoom 1×,2×,4× Temperature Scale Auto/Manual Make alarm when the temperature is above/below Temperature Alarm the threshold in the full frame...
-
Page 37: Rm305
RM Series Handheld Thermal Camera·User Manual 10% ~ 95%, non condensing Drop Encapsulation IP54(IEC 60529) Shock 25g(IEC 60068-2-27); Vibration Shock &Vibration 2.5g(IEC60068-2-6) Dimension（L×W×H） 258.4*105.1*102.3mm Weight About 660g (incl. Battery) Certificate CE/RoHS/WEEE/Calibration Certificate/DGM 5V2A power adapter, battery charger, battery×2, USB Accessories... - Page 38 RM Series Handheld Thermal Camera·User Manual Digital Zoom 1×, 2×, 4×,8× Visible Light and Available , thermal, dual-spectrum fusion, visible Dual-spectrum Fusion light, PIP, DDE(only available for some models) Palette 10 palettes Alarm when the temperature is above or below the...
-
Page 39: Rm320
RM Series Handheld Thermal Camera·User Manual Shock 25g(IEC 60068-2-27); Shock and Vibration Vibration2.5g(IEC60068-2-6) Dimensions(L*W*H) 258.4*105.1*102.3mm Weight 670g(incl. Battery) Certificates CE/RoHS/WEEE/Calibration Certificate/DGM 5V 3A power adapter (with various plugs to fit global regions), USB cable, SD card, battery×2, QSG, Accessories battery charger, calibration certificate, packaging list, hard transport case 6.4 RM320... - Page 40 RM Series Handheld Thermal Camera·User Manual Alarm is triggered when the temperature is above the Temperature Alarm highest temperature and below the lowest temperature in the full frame Alarm Type Image alarm Temperature Scale Manual/Auto temperature range Laser Indicator Available...
- Page 41 RM Series Handheld Thermal Camera·User Manual 5V 3A power adaptor, USB cable, SD card, battery Accessories ×2, QSG, calibration certificate, battery charger, package list...
-
Page 42: Rm315
RM Series Handheld Thermal Camera·User Manual 6.5 RM315 Thermal Module Detector Type VOx Uncooled FPA detector Resolution of Detector 384*288 Response Band 8~14μm Pixel 12μm NETD 35mK IFOV 1.31mrad Frequency 30Hz Focus 9.1mm 27°H*20°V Focus Mode Manual focus Temperature Measuring -20 ℃~150 ℃... - Page 43 RM Series Handheld Thermal Camera·User Manual XX-IR.jpg (thermal image with temperature data) and XX-DC.jpg (visible image) Image/video Storage H.264 videos without temperature data Type in custom text, make voice annotations Annotation Function through microphone, annotation via QR code scanning English, Polish, Korean, Hungarian, Brazilian...
-
Page 44: Rm600G
RM Series Handheld Thermal Camera·User Manual 6.6 RM600G Thermal Module Detector Type VOx Uncooled FPA detector Resolution of Detector 640*512 Response Band 8~14μm Pixel 12μm NETD 35mK IFOV 1.31mrad Frequency 30Hz Focus 9.1mm 48°*38° Focus Mode Manual focus Temperature Measuring -20 ℃~150 ℃... - Page 45 RM Series Handheld Thermal Camera·User Manual Digital Camera 5 MP Electronic Zoom Available in visible light and thermal mode. XX-IR.jpg (thermal image with temperature data) and XX-DC.jpg (visible image) Image/video Storage H.264 videos without temperature data Annotation Function Make voice annotations through microphone.
-
Page 46: Rm620
RM Series Handheld Thermal Camera·User Manual 6.7 RM620 Thermal Module Detector Type VOx Uncooled FPA detector Resolution of Detector 640*512 Response Band 8~14μm Pixel 12μm NETD 35mK IFOV 0.63mrad Frequency 30Hz Focus 19mm 23°*18° Focus Mode Manual focus Temperature Measuring Range -20 ℃~150 ℃... - Page 47 RM Series Handheld Thermal Camera·User Manual XX-IR.jpg (thermal image with temperature) and Image/video Storage XX-DC.jpg (Visual image); H.264 video without temperature info&.irv video with temperature info Annotation Function Make voice annotation via microphone English, Polish, Korean, Hungarian, Brazilian Language Portuguese, German, French, Spanish, Italian,...
-
Page 48: Introduction Of Application Scenarios
RM Series Handheld Thermal Camera·User Manual 7. Introduction of Application Scenarios 7.1 Detecting of Power Distribution Cabinet The temperature distribution of power distribution equipment can directly reflect the running status of the equipment. Improper contact or damage may cause abnormal high temperature. The inspection personnel can detect anomalies in time and ensure the safety of power distribution equipment with the aid of handheld thermal cameras. -
Page 49: Circuit Board R&D
RM Series Handheld Thermal Camera·User Manual 7.3 Circuit Board R&D The circuit board is small in size, high in integration and complex in structure, so the traditional contact detection consumes lots of time and energy. Infrared thermal imaging technology has absolute advantage in detecting faulty circuit board. -
Page 50: Dimensions
RM Series Handheld Thermal Camera·User Manual 8. Dimensions 8.1 Appearance 1... -
Page 51: Apperance 2
RM Series Handheld Thermal Camera·User Manual 8.2 Appearance 2... -
Page 52: Cleaning Thermal Camera
RM Series Handheld Thermal Camera·User Manual 9. Cleaning Thermal Camera 9.1 Cleaning Camera Housing, Cables and Other Items Camera Housing, Cables and Other Items One of the following liquids can be used. Liquids 1.Warm water 2.A Weak detergent solution Cleaning Tools... -
Page 53: Appendix A Emissivity Of Commonly Used Materials
RM Series Handheld Thermal Camera·User Manual Appendix A Emissivity of Commonly Used Materials (1) Metal Material Temperature (°C) Emissivity Aluminum Polished aluminum 0.09 Commercial aluminum foil 0.09 Mild aluminum oxide 25～600 0.10～0.20 Strong aluminum oxide 25～600 0.30～0.40 Brass Brass mirror (highly polished) 0.03... - Page 54 RM Series Handheld Thermal Camera·User Manual Material Temperature (°C) Emissivity Steel oxide 0.74 Melted mild steel 1600～1800 0.28 Molten steel 1500～1650 0.42～0.53 Lead Pure lead (non-oxidized) 125～225 0.06～0.08 Mildly oxidized 25～300 0.20～0.45 Magnesium Magnesium oxide 275～825 0.55～0.20 Mercury Mercury 0～100 0.09～0.12...
- Page 55 RM Series Handheld Thermal Camera·User Manual (2) Non-metal Material Temperature (°C) Emissivity Brick 1100 0.75 Firebrick 1100 0.75 Graphite (lamp black) 96～225 0.95 Enamel (white) Asphalt 0～200 0.85 Glass (surface) 0.94 Heat-resistant glass 200～540 0.85～0.95 Wall plaster Carbon sheet 0.85 Insulating sheet 0.91～0.94...
- Page 56 RM Series Handheld Thermal Camera·User Manual Material Temperature (°C) Emissivity Electronic materials Epoxy glass plate 0.86 Epoxy phenol plate Gold-plated copper sheet Solder-coated copper 0.35 Tin-coated lead wire 0.28 Copper wire 0.87～0.88...
Need help?
Do you have a question about the RM Series and is the answer not in the manual?
Questions and answers