Advertisement
Quick Links
TSP-DMS
Discriminating Magnetostrictive Sensor
Installation Manual
Manual #
Revision
Date
Changes from Previous Revision
000-0269
C
April 2011
Added note to remove tie and added tank interstitial installation
Franklin Fueling Systems • 3760 Marsh Rd. • Madison, WI 53718 USA
Tel: +1 608 838 8786 • 800 225 9787 • Fax: +1 608 838 6433 • www.franklinfueling.com
Advertisement
Related Manuals for Franklin Fueling Systems INCON TSP-DMS Series
Summary of Contents for Franklin Fueling Systems INCON TSP-DMS Series
- Page 1 April 2011 Added note to remove tie and added tank interstitial installation Franklin Fueling Systems • 3760 Marsh Rd. • Madison, WI 53718 USA Tel: +1 608 838 8786 • 800 225 9787 • Fax: +1 608 838 6433 • www.franklinfueling.com...
- Page 2 INCON equipment is designed to be Warning installed in association with volatile hydrocarbon liquids such as gasoline and diesel fuel. Installing or working on this equipment means working in an environment in which these highly flammable liquids may be present. Working in such a hazardous environment presents a risk of severe Unistrut Channel injury or death if these instructions and standard...
- Page 3 Use cables and wires compliant with national and local Use the crimp splice connectors supplied with the TSP- codes. Franklin Fueling Systems recommends using DMS, or equivalent, only. Failure to use the appropriate the types of cable list in Table 1 up to the recommended crimp-splice connectors will result in faulty operation and lengths.
- Page 4 Console — DMS Sensor Wiring Connections Probe The wiring should connect to the probe module. The probe Module module may also have wiring from vapor flow meters and / or other probes (See Figure 5). Non-Hazardous Hazardous Location Location Class I, Division 1, Group Remove 1-1/2”...
Need help?
Do you have a question about the INCON TSP-DMS Series and is the answer not in the manual?
Questions and answers