Maytag Amana NON-A2L Installation Instructions Manual

NON-A2L FURNACE INTEGRATION KIT
Installation Instructions
Attention Installing Personnel
As a professional installer, you have an obligation to know
the product better than the customer. This includes all
safety precautions and related items.
Prior to the actual installation, thoroughly familiarize
yourself with this instruction manual. Pay special attention
to all safety warnings. Often during installation or repair,
it is possible to place yourself in a position which is more
hazardous than when the unit is in operation.
Remember, it is your responsibility to install the product
safely and to know it well enough to be able to instruct a
customer in its safe use.
Safety is a matter of common sense. A matter of thinking
before acting. Most dealers have a list of specific good
safety practices. Follow them.
The precautions listed in this installation manual are
intended as supplemental to existing practices. However,
if there is a direct conflict between existing practices and
the content of this manual, the precautions listed here take
precedence.
Safety Precautions
The following symbols and labels are used throughout this
manual to indicate immediate or potential safety hazards.
It is the owner's and installer's responsibility to read
and comply with all safety information and instructions
accompanying these symbols. Failure to heed safety
information increases the risk of personal injury, property
damage, and/or product damage.
HIGH VOLTAGE
Disconnect all power before servicing this
unit. Multiple power sources may be present.
Failure to do so may cause property damage,
personal injury or death.
If the installation check, as detailed in these installation
instructions, does not pass successfully and cannot be
resolved by calling 1-855 DAIKIN1, option 3 for further
assistance, the installer must replace the furnace or
modular blower with an R-32 compatible furnace or
modular blower.
IO-7021B
03/2024
WARNING
19001 Kermier Rd., Waller, TX 77484
wwww.daikincomfort.com • www.goodmanmfg.com • www.amana-hac.com
© 2024 Daikin Comfort Technologies Manufacturing, L.P.
is a registered trademark of Maytag Corporation or its related companies
and is used under license. All rights reserved.
Do not bypass safety devices.
Only personnel that have been trained to install, adjust,
service, maintenance or repair (hereinafter, "service")
the equipment specified in this manual should service the
equipment.
This equipment is not intended for use by persons
(including children) with reduced physical, sensory or
mental capacities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
play with the equipment.
The manufacturer will not be responsible for any injury
or property damage arising from improper supervision,
service or service procedures. If you service this unit, you
assume responsibility for any injury or property damage
which may result. In addition, in jurisdictions that require
one or more licenses to service the equipment specified in
this manual, only licensed personnel should service the
equipment. Improper supervision, installation, adjustment,
servicing, maintenance or repair of the equipment specified
in this manual, or attempting to install, adjust, service
or repair the equipment specified in this manual without
proper supervision or training may result in product
damage, property damage, personal injury or death.
Items needed in kit:
IO Manual
PCB Case contain the Dragonfly PCB
Connector Pin 1
Connector Pin 2
Connector Pin 3
Mounting hardware (screws)
Mounting hardware (wall anchors)
WARNING
WARNING
Qty
1
1
1
1
1
4
4