Do you have a question about the QB1-21XE and is the answer not in the manual?
Questions and answers
Summary of Contents for Showersave QB1-21XE
Page 1
QB1-21XE Installation Manual & Product Registration Guide Important Failure to install the Showersave QB1-21XE as specified may adversely affect the performance of the shower and impact on the Energy Performance Certificate at the end of construction. Failure to correctly register this installation with the Showersave App (see page 7) may invalidate product warranty.
Page 2
Substitution with a “generic” alternative from another manufacturer will impact on and efficiency. The Showersave should be installed by a suitably qualified plumber, and installed in the the Energy Performance Certificate at the end of construction.
Page 3
Connect the ½” BSP male 15/22mm fitting to the outlet of Shutoff valve The QB1-21XE installation the QB1-21XE and connect in system A,B or C. must be registered via Do not wrap the Showersave QB1-21XE the Showersave App. with insulation.
Page 4
Joists Cyclone The QB1-21XE Cyclone can be Registering an installation using the Showersave App should take less than one minute. located in the ceiling void, if required. Ceiling If an installer is unable to access the App on-site, please contact us on 028 9334 4488 height or email sales@showersave.com to discuss alternative methods of registration.
Page 5
Important It is now a Legal requirement under new Building Regulations to register Showersave installations. This is not a request from Showersave. Registering an installation is simple and will ensure product warranty is validated. Contact Us Building Products Distributors Ltd...
Need help?
Do you have a question about the QB1-21XE and is the answer not in the manual?
Questions and answers