Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Briot Manuals
  4. Laboratory Equipment
  5. ALTA EVOLUTION Blocker
  6. Instruction manual

Briot ALTA EVOLUTION Blocker Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
B l o c k e r

Advertisement

loading
Need help?

Need help?

Do you have a question about the ALTA EVOLUTION Blocker and is the answer not in the manual?

Questions and answers

Related Manuals for Briot ALTA EVOLUTION Blocker

Summary of Contents for Briot ALTA EVOLUTION Blocker

  • Page 1 B l o c k e r...
  • Page 2 ALTA EVOLUTION / EVOLUTION GT … User Manual Installation 1.1. Unpacking the machine 1.1.1. Warning 1.1.2. Unpacking 1.2. Setting up 1.2.1. Workbench preparation 1.2.2. Installation 1.2.3. Machine connection 1.3. Turning on the machine 1.3.1. Switching the machine on 1.3.2. Switching the machine off 1.4.
  • Page 3 ALTA EVOLUTION / EVOLUTION GT … User Manual 3.4. Lens characteristics 3.4.1. Limits Configuration 4.1. Description 4.1.1. Configuration screen access 4.2. settings screens 4.2.1. Customization menu 4.2.2. Information menu Machine adjustment 5.1. Description Maintenance 6.1. Description 6.1.1. Manual purging of fittings databases 6.1.2.
  • Page 4 Dear Customer, You have purchased an EVOLUTION / EVOLUTION GT machine, and the entire team of Briot, a brand belonging to the Luneau Technology group, would like to thank you for the confidence you have shown us. The EVOLUTION / EVOLUTION GT machine is a laboratory machine designed for opticians and is used for carrying out operations such as creating fittings and centering and blocking spectacle lenses.
  • Page 5 ALTA EVOLUTION / EVOLUTION GT … User manual Θ GRAPHIC CODE Different graphic codes have been used in this manual to allow the user to distinguish between different types of information and easily spot the items which demand special attention (e.g. safety-related items). The table below lists and describes all the codes used: ESCRIPTION OF THE PICTOGRAMS RAPHIC CODES...

  • Page 6: Installation

    INSTALLATION...

  • Page 7: Unpacking The Machine

    ALTA EVOLUTION / EVOLUTION GT … User manual 1.1. UNPACKING THE MACHINE 1.1.1. W ARNING  Ensure that the machine is placed in accordance with the TOP and BOTTOM signs on the box.  Place the machine on a flat and stable surface. ...
  • Page 8 ALTA EVOLUTION / EVOLUTION GT … User manual 1.2. SETTING UP 1.2.1. W ORKBENCH PREPARATION Before installing the machine, check that the workbench corresponds to the following characteristics: Install the machine on a stable, level workbench. Provide a mark measuring of 360 mm x 600 mm on the workbench Do not place any obstacles (cabinet, shelf, etc.) lower than 600 mm above the workbench.

  • Page 9: Machine Connection

    If you connect the machine to an edger: connect the cable to the EDG 1 port using the RS232 cable provided. Contact your Briot dealer if you want to plug in other edgers.  In all cases, use the RS232 leads with the screening connected on both sides.

  • Page 10: Turning On The Machine

    ALTA EVOLUTION / EVOLUTION GT … User manual 1.3. TURNING ON THE MACHINE 1.3.1. S WITCHING THE MACHINE ON To turn on the machine, follow the steps below: Press the pushbutton, located at the bottom front left of the machine. On powering up, the bearing surface comes on in green during the machine's initialization (see below).
  • Page 11 Or press and hold on the Briot logo on the lower right corner of the screen (1), and then a button will appear. Press it to turn off the machine (2).

  • Page 12: Machine Presentation

    ALTA EVOLUTION / EVOLUTION GT … User manual 1.4. MACHINE PRESENTATION Touch screen ON / OFF Blocking Unit Centering area and optical plotter EDG port 2 RJ45 port EDG port 1 USB port HOST port ALTA EVOLUTION / EVOLUTION GT...

  • Page 13: Precautions For Use

    PRECAUTIONS FOR USE...

  • Page 14: Lithium Battery

    Keep the machine away from any source of dust.  Any work carried out on the machine (with the cover open or closed) must be undertaken by a Briot technician.  Do not place your hands in the hazardous area during the machine’s mechanical movements.
  • Page 15 Clean the machine regularly.   Comply with the machine maintenance messages.  Protect the machine's power cords.  Use blocks designed and supplied by Briot.  Use new adhesives. 2.2.2. C LEANING 2.2.2.1. UTSIDE COVER Use a clean, soft cloth moistened with some alcohol.

  • Page 17: Touch Gestures

    ALTA EVOLUTION / EVOLUTION GT … User manual 3.1. DESCRIPTION 3.1.1. OUCH GESTURES To help you browse in this manual, the symbols listed opposite represent the motions to be reproduced on your touch screen. Tap with the index finger. Press and swipe the index Scroll your fingers upwards on finger to the left or right.
  • Page 18 ALTA EVOLUTION / EVOLUTION GT … User manual 3.1.2. ISUAL REFERENCES  Button released: Button pressed:   Default value to be confirmed: Confirmed value:   Function active but not selected: Function selected:   Button with a long press action: ALTA EVOLUTION / EVOLUTION GT...

  • Page 19: Touch Screen

    ALTA EVOLUTION / EVOLUTION GT … User manual 3.2. DESCRIPTION OF WORKSTATIONS The ATTITUDE blocker includes the following user stations: 3.2.1. OUCH SCREEN The touch screen allows you to: Enter the fitting data,   Display the shape of the frame and the lens, ...

  • Page 20: Description Of Screens

    ALTA EVOLUTION / EVOLUTION GT … User manual 3.3. DESCRIPTION OF SCREENS 3.3.1. RESENTATION OF THE MAIN SCREENS The areas described below are common to the two main screens. Access the list Access the fitting number of fittings entry Access Access Access the the entry...
  • Page 21 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.1.2. -GT) ENTERING SCREEN From this screen, you can access the following functions: Centering a progressive lens,   Centering a bifocal lens,  Centering a lens marked with three points. Note: You can access the entry screen by swiping the screen to the right. Tip! To find out about the meaning of icons on this screen, refer to "Chapter 8 –...
  • Page 22 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.2. REATING ELECTING A FITTING There are 3 ways of calling up a fitting: Using the barcode and the handheld scanner (optional),   Using the alphanumerical keyboard by pressing the button, Using the list of existing fittings by pressing the button ...
  • Page 23 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.2.2. ALLING BACK A FITTING The list of fittings is shown below: you can sort them by the fitting number or the date. Entering fitting- related information Fitting Date Fitting side condition number/Barc (blocked, edged) Deleting the...
  • Page 24 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.3. NPUT SCREEN 3.3.3.1. CREEN DESCRIPTION Z-tilt Frame groove base Slide the cursor to the right to access input options. Horizontal symmetry on both sides Symmetric copy Frame type Precal back-up (option) Z-tilt: Tilt of frame in degrees.
  • Page 25 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.3.2. CORRECTION OF THE PUPILLARY DISTANCE The correction is calculated following the 2D half-pupillary distance in the customer's axis. This function is useful if the frame has a significant Z-tilt. The correction is automatic to respect the pupillary distance. Z-tilt Frame top view 1: half-pupillary distance used during blocking.
  • Page 26 ALTA EVOLUTION / EVOLUTION GT … User manual Z-Tilt screen Superimpose the frame on the screen (as indicated in the image below), to view and input the Z-Tilt angle of the frame. Positioning the frame on the Z-Tilt screen Press the value to directly input the Z-Tilt angle (number pad mode).
  • Page 27 ALTA EVOLUTION / EVOLUTION GT … User manual Number input mode Or manually adjust the guides on the frames using the 2 cursors (in green). Manual adjustment with cursors Once completed, press to confirm your changes. Or press to cancel your changes and go back to the input screen.
  • Page 28 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.3.4. GROOVE BASE FUNCTION (DIGITAL SPHEROMETER): Press the value to display the number pad. Press to access the Digital Spherometer screen. Bring the lens to the vision zone by holding it perpendicular to the bearing surface. The thickness of the lens must enter fully in the measurement zone (in green), and the central line must be aligned in the middle of the lens.
  • Page 29 ALTA EVOLUTION / EVOLUTION GT … User manual Once in place, press to perform the curve measurement. The value will be displayed in the gauge. Press to confirm Press to go back to the input screen without saving the measurement. Press to restart the measurement.

  • Page 30: Calling Up A Shape

    ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.4. ALLING UP A SHAPE Once the job number is entered, there are 3 ways of loading a shape:  Using the list of stored shapes by pressing the button, Using the GravitechTM optical plotter by pressing the button, ...
  • Page 31 ALTA EVOLUTION / EVOLUTION GT … User manual Possibility of filtering by drilled lenses Display of complete list Like the selected line or not Remove a manufacturer Delete the selected line To rename a manufacturer, do a long click to select the desired manufacturer. The screen below appears. Click on the empty space to display the alphanumerical keyboard, enter the new name and then validate.
  • Page 32 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.4.2. TORING A SHAPE IN MEMORY Tip! Enter a manufacturer name and a model. If you use a bar code reader, "beep" the desired code. If not, a default number is defined. If the model is already used, it appears in red.
  • Page 33 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.5. NTER A SHAPE 3.3.5.1. RAVITECH OPTICAL PLOTTER First draw frame axis on interior face using the tool and the felt-tip pen supplied in the accessory case. Refer to the unpacking guide FC00868 supplied with your machine. Line centered on lens It is possible to configure the side's automatic detection.
  • Page 34 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.5.1.1. M EASURING THE PRESENTATION LENS OR PATTERN You can position the axis in two ways: Using the (1) translation / (2) rotation browsing arrows on the right of the screen.  ...
  • Page 35 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.5.1.3. E LIMINATING THE HOLES If you have started the Gravitech optical centering with the hole detection function and you do not want to make them appear, you can eliminate them as follows: 3-20 ALTA EVOLUTION / EVOLUTION GT...
  • Page 36 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.5.1.4. A XIS LOCKING You can lock the axis (1) to check the detection of the lens outline in zoom mode (2). This action will avoid you moving the axis accidentally when performing a zoom. For this purpose, follow this procedure: If you want, you can enlarge the shape on the screen by pinching the screen to zoom (1) and then moving by simply pressing the screen (2).
  • Page 37 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.5.1.5. S HAPE OVERSIZE Lens compensation involves applying an oversize or otherwise (defined in the machine settings). Proportional 0.4mm double compensation compensation compensation with an extra width of 0.2mm Tip! You can change the compensation values from the setup screen – see chapter 4.2.1.2 Configuring the default settings. Tip! The numerical value appears when you click on the corresponding icon.
  • Page 38 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.6. HAPE CREATOR FUNCTION This function may be used on a presentation lens that may be partly damaged, or to create an original shape. To enter a frame, proceed as follows: Place the frame shimming tool Make sure that the right side of the frame (14 06 528) on the screen.
  • Page 39 ALTA EVOLUTION / EVOLUTION GT … User manual You are sent to the screen allowing you to enter the shape of your frame point by point. Moving a point or the frame axis Zoom in Activate/deactivate magnetism Blocking of axis readjustment Frame type Oversize value...
  • Page 40 ALTA EVOLUTION / EVOLUTION GT … User manual Appearance of a shape to adjust Note: The point being positioned appears in red on the screen. ALTA EVOLUTION / EVOLUTION GT 3-25...
  • Page 41 ALTA EVOLUTION / EVOLUTION GT … User manual In case of wrong positioning of a point, you may: Delete the point by clicking on the bin icon (1),  (long click to delete all points)  Move a point using the navigation arrows at the top right of the screen (2). Wrong positioning of a point Note: You have the possibility to select multiple points (long click and select an area (3)) in order to move them or delete them.
  • Page 42 ALTA EVOLUTION / EVOLUTION GT … User manual Note 2: You also have the possibility to select several adjacent points by multiple/radial selection (press the radial selection icon (4)), and then refine your selection using the two cursors (5 and 6) in order to move or delete them. ALTA EVOLUTION / EVOLUTION GT 3-27...
  • Page 43 ALTA EVOLUTION / EVOLUTION GT … User manual You have the possibility to place a point without using magnetism. For this purpose, follow this procedure:  Deactivate the magnetic function by clicking on the icon (1),  Position your point on the screen (2), ...
  • Page 44 ALTA EVOLUTION / EVOLUTION GT … User manual Choose your oversize value beforehand, among the three default values, according to the frame type (plastic, metal or presentation lens). Once your shape is done, you may validate it. Validate the entered shape Enter the value of the desired frame bridge, then validate.
  • Page 45 ALTA EVOLUTION / EVOLUTION GT … User manual You can also enter the groove depth (distance between the inside edge of the frame and the base of the groove). Groove depth entry zone To do this:  Press the entry zone to the right of the icon ...
  • Page 46 ALTA EVOLUTION / EVOLUTION GT … User manual Then, you will be sent to the frame display screen. At any time, you may return to the Shape creator screen by clicking on Display of the frame shape screen ALTA EVOLUTION / EVOLUTION GT 3-31...
  • Page 47 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.7. EFINING A DRILLING PATTERN 3.3.7.1. UTOMATICALLY DETECTING THE DRILLING PATTERN This screen is displayed automatically once the Gravitech optical plotter has been confirmed. (See chapter 3.3.5.1.6 Bridge value) Add one or more holes Selected hole movement...
  • Page 48 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.7.1.2. C HANGING THE COORDINATES ORIGIN To choose you hole as a coordinate system origin, follow this procedure: Press the icon (1) and then the hole to be used as a reference (2). Tip! To return to a centered origin, press the icon again.
  • Page 49 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.7.1.3. MULTIPLE SELECTION OF HOLES To carry out a multiple selection, follow this procedure: Press the icon (1) and then select the holes in the desired area (2). Once the multiple selection has been made, the holes are displayed in orange. You can now position them where you want, either by adjusting the difference between the holes by pressing by aligning them by pressing You can also change the hole diameter by pressing either the value to display the number pad, or the + or - buttons.
  • Page 50 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.7.1.4. H OLE TYPES Three types of holes are available: Single hole Oblong Notch According to the selected hole, there are three types of drilling holes the dimensions of which have to be entered. Emerging Spotfacing Not emerging...
  • Page 51 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.7.1.5. M ANUAL ENTERING OF HOLES From one of the two main screens (entry or centering), press the button to be redirected to the screen below. From this screen, you can manually position the desired holes (hole, notch or oblong). For this purpose, press the types of hole to be made (1), and then the lens to position it (2).
  • Page 52 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.8. -GT) ENTERING A LENS 3.3.8.1. NTERING OFFSET VALUES From this screen, you can enter the patient's offset values The values in red on the screen are the default values. They then benefit from the entry carry over when the value of the opposite side is changed (see below). This carry over does not work on the axis values.
  • Page 53 ALTA EVOLUTION / EVOLUTION GT … User manual The value entered then turns white and is displayed identically on the symmetry (carry over of values). Click on the value of the opposite offset to be changed. You can either confirm the value directly or change it to meet your needs.
  • Page 54 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.8.1.2. E NTRY MODES By making a long press on the value corresponding to the half-pupillary distance mode, you can switch to Delta X mode (and vice versa). "Half-pupillary distance" entry screen Entry screen in "Delta X"...
  • Page 55 ALTA EVOLUTION / EVOLUTION GT … User manual By making a long press on the value corresponding to the box height mode, you can switch to mixed height mode or Delta Y mode (and vice versa). Entry screen in "Box height" mode Entry screen in "Mixed height"...
  • Page 56 ALTA EVOLUTION / EVOLUTION GT … User manual You may enter the lens' front base (see chapter 3.3.3.2 3D correction of the pupillary distance) Entry screen in "Delta Y" mode ALTA EVOLUTION / EVOLUTION GT 3-41...
  • Page 57 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.8.2. OSITIONING THE LENS Position the lens for centering: Place the lens on the bearing surface with its Insert the block with its adhesive (see chapter holder. 3.3.9.1) 3.3.8.3. ANUAL CENTERING 3.3.8.3.1. L ENS TYPE Various types of lenses can be centered and locked by the machine: Bifocal...

  • Page 58: Centering A Progressive Lens

    ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.8.4. ENTERING A PROGRESSIVE LENS Manually position the lens, by aligning the black cross on the centering cross (green): Check the alignment by zooming in on the location of the micro-engravings. They must be in the centering circles. Manual brightness adjustment Distance between the...
  • Page 59 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.8.5. ENTERING A BIFOCAL LENS Manual brightness adjustment Bifocal segment width Align the centering axis (green) according to the near vision upper area (pink): 3-44 ALTA EVOLUTION / EVOLUTION GT...
  • Page 60 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.8.6. ENTERING A POINT LENS First mark your unifocal lenses with the lensmeter. Manual brightness adjustment Manually align the 3 points along the centering axis (green), with the midpoint at the center of the cross: ALTA EVOLUTION / EVOLUTION GT 3-45...
  • Page 61 ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.8.7. ENTERING A TINTED LENS Although the brightness adjustment is done automatically for a tinted lens, if you want to change the brightness, follow these steps: • Press the manual brightness adjustment button. The brightness adjustment bar will then appear at the bottom of your screen.

  • Page 62: Modifying A Shape

    ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.9. ODIFYING A SHAPE IGIFORM FUNCTION In some cases the pattern used for drilled frames or nylor frames does not match the required shape. The Digiform function allows any initial shape to be changed into a new pattern. For this purpose, follow this procedure: Switch over to the Digiform screen.
  • Page 63 ALTA EVOLUTION / EVOLUTION GT … User manual To change the values displayed on the screen (in green), press the value to be changed (1) to bring up the number pad or the green area to stretch the lower part of the shape (2). The new shape can then be viewed (in orange).
  • Page 64 ALTA EVOLUTION / EVOLUTION GT … User manual Select the portion of the lens to smooth using the 2 cursors (green and red). Zoom You can zoom in at any time by pressing Choose the desired smoothing type by pressing for SD smoothing (Bézier), or by pressing for straight smoothing.
  • Page 65 ALTA EVOLUTION / EVOLUTION GT … User manual Example of SD smoothing (Bézier) Example of straight smoothing Once your selection is made, you can then confirm by pressing ; or if the change made is not satisfactory, press to cancel 3-50 ALTA EVOLUTION / EVOLUTION GT...
  • Page 66  Place a block fitted with adhesive in the head of the blocker (Caution! The use of adhesives which are not  specifically recommended by Briot may result in malfunctions during subsequent edging phases).  Hold the lens during blocking.

  • Page 67: Removing A Lens

    ALTA EVOLUTION / EVOLUTION GT … User manual 3.3.9.2. EMOVING A LENS Once the locking is completed, recover the lens using the block. Note: If the lens is too fine to be handled, slide it to the right to move it to the bar. 3-52 ALTA EVOLUTION / EVOLUTION GT...
  • Page 68 ALTA EVOLUTION / EVOLUTION GT … User manual 3.4. LENS CHARACTERISTICS 3.4.1. IMITS The ALTA EVOLUTION is designed to block lenses with the following characteristics:  Diameter: 45mm < Ø < 80 mm  Index and colour: the index and colour have no effect on automatic centering. ...
  • Page 69 CONFIGURATION...
  • Page 70 4.1. DESCRIPTION 4.1.1. ONFIGURATION SCREEN ACCESS The main entering or centering screen provides access to the technical user menus used to adjust your machine. To access the configuration screen, press and hold the "Briot" logo. ALTA EVOLUTION / EVOLUTION GT...
  • Page 71 ALTA EVOLUTION / EVOLUTION GT … User manual To access the available menus (as in the example in orange below), scroll the screens to the desired menu (1). You can also access a screen containing the machine's settings by pinching the screen (2). ALTA EVOLUTION / EVOLUTION GT...

  • Page 72: Settings Screens

    ALTA EVOLUTION / EVOLUTION GT … User manual 4.2. SETTINGS SCREENS 4.2.1. USTOMIZATION MENU You have now selected the Customization screen 4.2.1.1. ONFIGURE DATE AND TIME To configure the date and time of your machine, proceed as follows: Change the time zone before changing the time. ALTA EVOLUTION / EVOLUTION GT...

  • Page 73: Configure The Keyboard

    ALTA EVOLUTION / EVOLUTION GT … User manual 4.2.1.2. ETTING THE OPERATOR LANGUAGE To set the default operator language, follow the steps below: 4.2.1.3. ONFIGURE THE KEYBOARD ALTA EVOLUTION / EVOLUTION GT...

  • Page 74: Settings Details

    ALTA EVOLUTION / EVOLUTION GT … User manual 4.2.1.4. ETTING THE DEFAULT SETTINGS To set the default parameters, follow the steps below: 4.2.1.4.1. ETTINGS DETAILS Delta X Half-pupillary distance Height between micro- engravings and blocking Delta Y reference Box height Width between micro- Mixed height engravings...

  • Page 75: Information Menu

    ALTA EVOLUTION / EVOLUTION GT … User manual Optical plotter oversize Automatic detection of side in optical plotter Activation/Deactivation of offset blocking* Default oversize Value of the oversize + Value of the oversize ++ NOTE: The oversize values are accumulated. For example: The total oversize in mode (++) corresponds to adding the default oversize + the oversize (+) + the oversize (++) The oversizes are applied to the shape width.

  • Page 76: Machine Adjustment

    MACHINE ADJUSTMENT...
  • Page 77 ALTA EVOLUTION / EVOLUTION GT … User manual 5.1. DESCRIPTION The adjustments are accessible only for an authorized technician. ALTA EVOLUTION / EVOLUTION GT...

  • Page 78: Maintenance

    MAINTENANCE...
  • Page 79 ALTA EVOLUTION / EVOLUTION GT … User manual 6.1. DESCRIPTION To guarantee your machine's performance, you must perform several maintenance operations regularly and make sure you configure and adjust your machine according to the use you want to make of it. The main user technical screen provides access to the user technical menus, including Maintenance, as shown in orange below: You have now selected the Maintenance screen:...
  • Page 80 ALTA EVOLUTION / EVOLUTION GT … User manual 6.1.1. ANUAL PURGING OF FITTINGS DATABASES To purge your fittings databases more than 30 days* old, follow the steps below: Non-blocked fittings Blocked fittings Edged fittings Note: Purging is only carried out when the button is pressed.

  • Page 81: Touch Screen Maintenance

    ALTA EVOLUTION / EVOLUTION GT … User manual 6.2. CENTERING DEVICE/BLOCKER MAINTENANCE 6.2.1. LEAN THE BEARING SURFACE To clean the bearing surface, follow the steps below: Remove any component that may hinder proper performance of the operation. Clean with a soft, dry, grease-free and lint-free cloth. Note: It is recommended to clean the installation surface with a circular movement from the centre outwards.

  • Page 82: Preventive Maintenance

    By making sure to only use parts recommended by the manufacturer you will optimise your machine's working life. 6.4.2. EPLACEMENT TABLE FOR STANDARD PARTS 6.4.2.1. CCESSORIES The accessories delivered with the ALTA EVOLUTION Blocker are as follows: Accessory L.T.O part number S3 64 29 Case provided with foam 11 53 026 Briot magnetic block GM V3 Ø25 (Non GT)

  • Page 83: Types Of Messages

    ALTA EVOLUTION / EVOLUTION GT … User manual 6.5. MESSAGES 6.5.1. YPES OF MESSAGES There are three types of messages:  Information messages,  Warning messages,  Error messages. 6.5.2. ESSAGE LIST The following tables list the most common messages that may appear whilst using the machine together with the possible solutions.
  • Page 84 ALTA EVOLUTION / EVOLUTION GT … User manual ALTA EVOLUTION / EVOLUTION GT...

  • Page 85: Technical Specifications

    TECHNICAL SPECIFICATIONS...
  • Page 86 ALTA EVOLUTION / EVOLUTION GT … User manual 7.1. TECHNICAL SPECIFICATIONS The general characteristics of the Evolution blocker are as follows:  Dimensions:  ALTA EVOLUTION :  Width: 325 mm  Depth: 305 mm  Height: 433 mm  EVOLUTION GT: ...
  • Page 87 APPENDIX...

  • Page 88: Description Of Buttons

    ALTA EVOLUTION / EVOLUTION GT … User manual 8.1. DESCRIPTION OF BUTTONS 8.1.1. B UTTONS COMMON TO THE SCREENS : Calling up a fitting : Accessing the list of existing fittings : Accessing the list of patterns in memory : Saving a pattern : Deleting entered information : Accessing the entry screen : Accessing the centering screen...
  • Page 89 ALTA EVOLUTION / EVOLUTION GT … User manual : Select a metal frame : Reverse the job sides (L/R) : Conduct a symmetric copy : Perform a back-up on an external server (option) : Value of frame groove base : Tilt of frame (Z-tilt) 8.1.3.
  • Page 90 ALTA EVOLUTION / EVOLUTION GT … User manual 8.1.4. C ENTERING SCREEN BUTTONS : Centering a progressive lens : Centering a single vision lens : Centering a lens marked by three points : Diameter of hole(s) : Lens base 8.1.5. D IGIFORM SCREEN BUTTONS : Entry of values in a mode not proportional to the initial shape : Entry of values in a mode proportional to the initial shape...
  • Page 91 ALTA EVOLUTION / EVOLUTION GT … User manual 8.1.6. D RILLING SCREEN BUTTONS : Selected hole moved downwards : Selected hole moved to the right : Selected hole moved to the left : Selected hole moved upwards : Selecting the drilled hole parallel to the clamping shafts : Selecting the drilled hole normal to the front face : Selecting the drilled hole normal to the rear face : Selecting the drilled hole normal to the desired base...
  • Page 92 ALTA EVOLUTION / EVOLUTION GT … User manual 8.1.7. L IST OF FITTINGS SCREEN BUTTONS : Sort by barcode number : Sort by date : Enter information about the selected fitting : Delete the selected job 8.1.8. L IST OF PATTERNS SCREEN BUTTONS : Sort by barcode number : Sort by lens side (R/L) : Sort by manufacturer name...
  • Page 93 ALTA EVOLUTION / EVOLUTION GT … User manual 8.1.9. S HAPE REATOR SCREEN BUTTONS : Axis moved downwards : Axis moved to the right : Axis moved to the left : Axis moved upwards : Deleting all the dot : Offset ok, No oversize required : Offset +, Apply an oversize of 0.10mm : Offset ++, Apply an oversize of 0.10mm : Bridge positioning side...
  • Page 94 2, rue Roger Bonnet 27340 PONT DE L'ARCHE FRANCE Tél. : (33) 02 32 98 91 32 Fax : (33) 02 35 02 02 94...

This manual is also suitable for:

Alta evolution.gt