Insignia NS-TVLCTB Assembly Manual
Insignia NS-TVLCTB Assembly Manual

Insignia NS-TVLCTB Assembly Manual

Mobile tv cart, for vesa patterns: 3.9 x 3.9" 100 x 100 mm, 3.9 x 7.9" 100 x 200 mm, 5.9 x 5.9" 150 x 150 mm, 7.9 x 3.9" 200 x 100 mm, 7.9 x 7.9" 200 x 200 mm, 7.9 x 11.8" 200 x 300 mm, 7.9 x 15.7" 200 x 400 mm, 11.8 x 7.9" 300 x 200 mm, 11.8 x 11.8" 300

Advertisement

Mobile TV Cart
NS-TVLCTB
For VESA patterns:
• 3.9 × 3.9" (100 x 100 mm)
• 3.9 × 7.9" (100 x 200 mm)
• 5.9 × 5.9" (150 x 150 mm)
• 7.9 × 3.9" (200 × 100 mm)
• 7.9 × 7.9" (200 × 200 mm)
• 7.9 × 11.8" (200 × 300 mm)
• 7.9 × 15.7" (200 × 400 mm)
• 11.8 × 7.9" (300 × 200 mm)
• 11.8 × 11.8" (300 × 300 mm)
• 11.8 × 15.7" (300 × 400 mm)
• 15.7 × 7.9" (400 × 200 mm)
• 15.7 × 11.8" (400 × 300 mm)
• 15.7 × 15.7" (400 × 400 mm)
• 23.6 × 15.7" (600 × 400 mm)
Before using your new product, please read these instructions to prevent any damage.
ASSEMBLY GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NS-TVLCTB and is the answer not in the manual?

Questions and answers

Summary of Contents for Insignia NS-TVLCTB

  • Page 1 ASSEMBLY GUIDE Mobile TV Cart NS-TVLCTB For VESA patterns: • 3.9 × 3.9" (100 x 100 mm) • 3.9 × 7.9" (100 x 200 mm) • 5.9 × 5.9" (150 x 150 mm) • 7.9 × 3.9" (200 × 100 mm) •...
  • Page 2: Safety Information And Specifications

    Safety information and specifications IMPORTANT SAFETY Maximum TV weight: 130 lbs. (58.96 kg) INSTRUCTIONS - SAVE THESE Screen size: 32 in. to 90 in. diagonal INSTRUCTIONS Overall dimensions (H × W ): CAUTION: Please read this instruction carefully 89.7 × 41.3 in. (228 × 105 cm) before assembly.
  • Page 3 Mobile TV Cart Dimensions 23.6 in. (60 cm) Max VESA 3.9 in. (10 cm) Min VESA 15.7 in. (40 cm) Max VESA 3.9 in. (10 cm) Min VESA 89.7 in. (228 cm) Max 63 in. (160 cm) Min 65 in. (165 cm) Max 49.3 in.
  • Page 4: Tools Needed

    Features • A simple solution to transporting your TV from room to room • Sturdy construction supports TVs from 32–90" (81– 228.6 cm) and up to 130 lbs. (58.96 kg) • Compatible with VESA patterns from 100 × 100 to 600 × 400 (with all common sizes in between) •...
  • Page 5 Mobile TV Cart Mounting hardware Note: Hardware items L through R are provided to assemble your TV cart. Hardware items AA through NN are provided to install the TV brackets onto your TV. Label Hardware Qty. Label Hardware Qty. M8 × 20 mm M8 ×...
  • Page 6: Installation Instructions

    Installation instructions STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for instructions.
  • Page 7 For an irregular or obstructed TV back, also use the spacers (II, JJ, or KK). Note: If the included hardware does not work for your TV, call 1-877-467-4289, for Insignia Customer Support, and we’ll work to determine the necessary parts required and ship them to you without charge.
  • Page 8 STEP 3 - Option 1: Attaching the mounting hardware to TVs with a flat back Align the left and right TV brackets with the screw holes on the back of the TV. Make sure that the brackets are level. Install washers (MM or NN), and screws (AA, BB, CC, or DD) into the holes in the back of the TV.
  • Page 9 Mobile TV Cart STEP 3 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs Place spacers (II, JJ, KK, or LL) over the holes on the back of the TV. Align the left and right TV brackets with the screw holes on the back of the TV.
  • Page 10 STEP 4 - Assembling the cart base Turn the cart base (A) over and place it on a carpet or towel, so as not to mar the finish. Place a spring washer (Q) and M12 washer (P) over each caster shaft and insert a caster (H) into each of the four holes in the legs of the cart base.
  • Page 11 Mobile TV Cart STEP 5 - Insert and secure the poles Insert the poles (C) into the holes in the top of the cart base (A). Note: Position both screws (L) in the holes first, then tighten, and remember to assemble the bottom screws (M).
  • Page 12 STEP 6 - Extending and securing the upper poles Remove the warning labels from the poles (C). Remove the warning tape before pulling the upper poles up Pull the upper poles up from the tops of the poles (C) to approximately the height you want (you can adjust this later).
  • Page 13 Mobile TV Cart Note: If the upper hole does not align with the lower hole when tightening the screw, you can gently rotate the pipe-insert inside the bottom poles to align the upper and lower holes. You’ll need L M8 x 16 mm screws (4) R 5mm hex wrench www.insigniaproducts.com...
  • Page 14 STEP 7 - Installing the TV mounting plate • Using four M8 x 60 mm screws (N), attach the TV mounting plate (F) to the upper poles, then tighten with the hex wrench (R). Note: Position all four screws in the holes first, then tighten.
  • Page 15 Mobile TV Cart STEP 8 - Mounting the TV/mounting plate assembly to the cart CAUTION: Lock the casters so that the cart does not move while you are mounting the TV/mounting plate assembly. Holding the TV with the top of the screen tilted toward the wall, slide the upper edges of the right and left TV brackets (G) into the rail on the upper lip of the TV mounting plate (F).
  • Page 16 STEP 9 - Mounting the accessory shelf • Attach the accessory shelf (B) to the poles, and then tighten the knobs (2) on the accessory shelf until secure. You’ll need B Accessory shelf www.insigniaproducts.com...
  • Page 17 Mobile TV Cart STEP 10 - Attaching the accessory tray and support bracket (optional) Attach the accessory tray (E) to the support bracket (D), using two M4 x 8 mm screws (O), then tighten with the hex wrench (R). Attach the accessory tray/support bracket assembly to the TV mounting plate (F) with two M8 x 16 mm screws (L), then tighten with the hex wrench (R).
  • Page 18 STEP 11 - Attaching the accessory tray • Place the accessory on the accessory tray and secure with hook and loop strips (K). Tip: Two hook and loop strips can be combined to secure accessories. You’ll need K Hook and loop strips (2) www.insigniaproducts.com...
  • Page 19 Mobile TV Cart STEP 12 - Attaching the grommets and cable clips • Attach cable clips (I) and grommets (J) to the two upper poles. Note: Cable clips (I) and grommets (J) come pre-installed on the lower poles, so installation is not required. You’ll need I Cable clips (2) J Grommets (2)
  • Page 20: Specifications

    STEP 13 - Managing your cables • Run cables through either or both poles as necessary, as shown. Specifications Maximum Weight Capacity 130 lbs. (58.96 kg) Compatibility 32” – 90” TVs Adjustable Maximum Height 65” (165 cm) Dimensions (H x W x D) 89.76 (Max) x 41.34 x 30.75 in.
  • Page 21: One-Year Limited Warranty

    Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you.
  • Page 22 Damage due to incorrect operation or maintenance • Connection to an incorrect voltage or power supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold “as is” or “with all faults” •...
  • Page 23 1-877-467-4289 www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2024 Best Buy. All rights reserved V2 ENGLISH 24-0396...

Table of Contents