Related Manuals for Racing RACPV18V2BA
Summary of Contents for Racing RACPV18V2BA
- Page 1 ORIGINAL INSTRUCTIONS=>EN CORDESS DRILL RACPV18V2BA USER GUIDE CAUTION: Read the instructions before using the machine!
- Page 2 Fig. A...
-
Page 3: Table Of Contents
CONTENTS INTENDED USE............................. 4 DESCRIPTION............................4 PACKAGE CONTENT LIST......................... 4 SYMBOLS............................... 4 GENERAL POWER TOOL SAFETY WARNINGS................5 SCREWDRIVER SAFETY WARNINGS..................... 7 ADDITIONAL SAFETY WARNINGS....................7 OPERATION............................9 CLEANING AND MAINTENANCE....................10 TECHNICAL DATA..........................10 NOISE..............................11 STORAGE............................11 ENVIRONMENT..........................11 BATTERY PACK..........................11 DECLARATION OF CONFORMITY.................... -
Page 4: Intended Use
1. INTENED USE The power tool is intended for driving and drilling through wood and plastics It is not designed for professional use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. -
Page 5: General Power Tool Safety Warnings
5. GENERAL POWER TOOL SAFETY WARNINGS GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. - Page 6 ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
-
Page 7: Screwdriver Safety Warnings
b) Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fasteners may contact hidden wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. 2) Safety instructions when using long drill bits a) Never operate at higher speed than the maximum speed rating of the drill bit. - Page 8 If under extreme conditions any electrolyte should escape from the battery, it's essential to avoid contact with skin. If electrolyte does come into contact with your skin, rinse it off with water. In the event of electrolyte contact with your eyes, it's essential to consult a doctor. This charger can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and...
-
Page 9: Operation
machine ▪When the battery is outside the drill, cover the contacts to avoid short circuits (e.g. from tools) ▪Do not throw batteries into water or fire, risk of explosion! ▪Protect the battery from impacts, and don't open it. ▪Never discharge the battery completely and recharge occasionally if not used for a prolonged period WARNING: recharge... -
Page 10: Cleaning And Maintenance
If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts. 10. TECHNICAL DATA Model RACPV18V2BA Rated voltage 18V d.c. , (20V max) No-load speed 0-650/min... -
Page 11: Noise
Impact drilling into concrete: ah,ID=11,505m/s K=1,5m/s Vibration Drilling into metal: 1.298m/s² K =1,5 m/s² ah,D= 11. NOISE Noise emission values measured according to relevant standard. ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A). Information: The declared vibration total value(s) and the declared noise emission value(s) have been measured in accordance with a standard test method and may be used for comparing one tool with another. -
Page 12: Declaration Of Conformity
ZI, 32 rue Aristide Bergès – 31270 Cugnaux – France Declares that the machinery designated below: Drill / Screwdriver RACPV18V2BA S/N: 20230300716-20230302715 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration. -
Page 13: Warranty
16. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 14: Product Failure
17. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 15: Warranty Exclusions
18. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 16 BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France Made in PRC 2023...
Need help?
Do you have a question about the RACPV18V2BA and is the answer not in the manual?
Questions and answers