Solid SF-828 Quick Start Manual

Hevc full hd digital satellite db meter

Download this manual

SOLID SF-828 HEVC Full HD Digital Satellite dB

Meter

Now you can check audio and video for FTA satellite TV channels. This meter is an upgraded

version of SF-810 and comes with HEVC technology.

General Features

DVB-S/DVB-S2 Constellation and Spectrum Analyzer supported

4.3 "inch deﬁnition TFT LCD screen

Measurement of BER, MER, C/N

CCTV camera Tester supported

13V/18V/22KHz/Lock/Power status display

DISEqC 1.0/1.1/1.2/USALS

Multi-media Payout supported

Multilingual OSD for worldwide use

USB2.0 interface available for software update

LED torch and stereo- loudspeaker inside

5000mAh long-life rechargeable Li-ion battery

1. Product Overview

2. Power Key: Press the power key for 3s to turn the unite on/off

3. LCD Screen: Shows menus and parameters clearly

4. Power light: Indicates the power status

Red: The unit is switched on or in charging

Red ﬂashing: The unit has been short-circuited

Red/Green alternating ﬂashing: The unit needs to be charged or it is fully charged

3. Lamp Light: switch on/off the utility LED on the back

4. 22K Hz/ 13V/18V lights: Indicate the 22K Hz/ 13V/18V status

5. Function keys: F1-F4, to access functions indicated on the display

6. Arrow key and OK key: Press the arrow key to select the desired function then press OK

to conﬁrm

7. 8. MENU key: Enter the main menu

8. EXIT key: Exit from the present menu back to the previous menu

9. 10. SAT key: To start satellite search

10. FIND key: Enter the packet control menu, You can ﬁnd the information about

transponders quickly

11. TV/RADIO: To switch between TV and Radio services

12. RECALL: Show the previously viewed channel or list

Need help?

Do you have a question about the SF-828 and is the answer not in the manual?

Page 1 SOLID SF-828 HEVC Full HD Digital Satellite dB Meter Now you can check audio and video for FTA satellite TV channels. This meter is an upgraded version of SF-810 and comes with HEVC technology. General Features DVB-S/DVB-S2 Constellation and Spectrum Analyzer supported 4.3 “inch deﬁnition TFT LCD screen...
Page 2 III. Technical parameters DVB-S/S2 Measurement Modulation type QPSK 8PSK 16APSK 32APSK Symbol Rate 1Mbps-60Mbps Frequency Range 950MHz-2150MHz Input Signal Level -65dBm-25dBm Input Impedance 75 ohm Code Rate 1/4 , 1/3 ,2/5 ,1/2 ,3/5 , 4/5 ,5/6 ,8/9 , 9/10 LNB Switch Control 22KHz DisEqC 1.0/1.1/1.2 DiSEqC 1.0/1.1/1.2/1.3(USALS)
Page 3 Frequency Rate VHF:174-230MHz UHF:470-858MHz DVB-C: 44MHz-864MHz VII. Standard Accessories User’s manual Adapter F-type connector Li-ion Battery 5000mAH/7.4 Rechargeable OPTIONAL ACCESSORIES - HDMI cable AV cable DC- Micro USB power cable Car charger/power cable BNC-AV connector Nylon Bag & Straps IV.System Setting 1.
Page 4 ● Connect the CCTV camera signal cable with ﬁnder BNC to AV Connect the CCTV camera with the ﬁnder via a power cable (12V out interface) ● ● Enter the Main menu – system setting – other power supply: Switch to ON” Satellite Meter Setup ●...