Advertisement
Table of Contents
Rev: 4.2.24a
OWNERS MANUAL
Gun Carriage & Small Machine Guidance Laser
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
P/N 3003-1041
1810 SE First Street, Suite H, Redmond, OR 97756
Phone: 541-548-0882 ● Fax: 541-548-0892 ● Email: laserline@laserline.net
Website: www.laserlinemfg.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LaserLine GL3000PM-S
Summary of Contents for LaserLine GL3000PM-S
- Page 1 Gun Carriage & Small Machine Guidance Laser Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. P/N 3003-1041 1810 SE First Street, Suite H, Redmond, OR 97756 Phone: 541-548-0882 ● Fax: 541-548-0892 ● Email: laserline@laserline.net Website: www.laserlinemfg.com...
-
Page 2: System Overview
Operator so that the reference is in the driving field of view instead of a T.V. screen or boom pointer. The GL3000PM-S can be used for both gun carriage and or truck guidance. THE ADVANTAGES •... - Page 3 LASER MECHANICAL FEATURES FRONT VIEW ¼” Heavy duty, hard coat anodized aluminum housing 5/8-11 Adjustment Bolt (Tilt Up & down) Heavy duty vertical & 5/8-11 Adjustment horizontal base plate mount Bolt (Left & Right) REAR VIEW Military Spec ¼ turn 3-pin connector IP68 Rated-Waterproof Purge valve filled w/ 7lbs...
-
Page 4: Control Box
OPERATOR CONTROLS (GL3000PM-S) CONTROL BOX Main Power Switch I=On 0=Off Power Indicator Light Main System Laser Mode Switch I=Steady Spot 0=Blinking Spot Laser Status Light Solid Blinking Power Cable to Vehicle 12 or 24VDC. White wire positive Black wire to ground 6. -
Page 5: Installation Suggestions
INSTALLATION SUGGESTIONS USING THE GL3000PM-S LASER 1. Mount the GL3000PM-S laser to a stable surface at a 1. Place vehicle at your desired location on the road. minimum of 3 feet off the ground. The higher up the 2. Aim the laser spot to the desired reference point on the laser is mounted, the farther ahead of the vehicle you road;... - Page 6 P/N 3001-0080-S Owner Operator’s Manual (Not shown) *Optional: P/N 3001-0008-S Dual Function Control Box: Controls two GL3000PM-S lasers simultaneously. Featuring a master On/Off control switch, plus two control buttons, allowing the operator to choose desired modes separately, such as; steady mode, blinking mode or stand-by On/Off mode.
- Page 7 The maximum power output of this laser is less than 5mW for U.S. compliance. A laser safety kit is supplied with the GL3000PM-S laser. The kit contains operator qualification cards and a sign that should be posted near the laser whenever it is in use. Observe the following operating rules: •...
- Page 8 Maintenance The GL3000PM-S requires no maintenance other than periodically cleaning the laser output lens. Use a soft cloth with Windex or alcohol. *NOTE: Laser must be turned OFF when cleaning the lens, so as not to create unwanted laser refraction.
- Page 9 GL3000PM-S LABELS The labels required for this product are: Purge Valve Label Warning Label Hazard Symbol Aperture Label Identification & Certification Label State of California Prop 65 Label OSHA REQUIRED (USA ONLY) Warning Plaque: To be posted near laser Operator Card: To be carried by laser operator...
- Page 10 GL3000PM-S Specifications Laser • Laser Wavelength 515-520nm • Laser Power: 4.75mW • U.S.A: ‘Class IIIa’ in the U.S. under US FDA/CDRH 21 CFR, part I, Subchapter J, sections 1040.10 and 1040.11 • This product is ANSI Z136 compliant and should be operated under the terms of ANSI Z136.1 (Visit www.ANSI.org or www.lia.org for more in-depth information)
-
Page 11: Warranty
2 years from the date of purchase, except as noted herein. LaserLine Mfg., Inc. liability under this warranty is limited to repairing or replacing any product returned to an authorized service center for that purpose. Any evidence of attempts to repair this unit by other than factory authorized personnel automatically voids the warranty. - Page 12 LaserLine Mfg., Inc. 1810 SE First Street Ste. H Redmond, OR 97756 Phone: 541-548-0882 Email: laserline@laserline.net Website: www.laserlinemfg.com...
Need help?
Do you have a question about the GL3000PM-S and is the answer not in the manual?
Questions and answers