Summary of Contents for AudioControl Stinger TXGM14D10
Page 1
NOTE! Read this installation guide thoroughly before disassembling or modifying the vehicle. Installation of this product requires technical skill, experience and specialized tools. If in doubt, it’s recommended to have it professionally installed by an authorized Stinger or AudioControl Dealer. A video installation guide is available at:...
INSTALLATION NOTES The TXGM14D10 is designed to mount under the rear seat of GM Crew Cab Trucks. Some installation steps are more easily completed with a second person. Speaker wire is required. Final enclosure impedance: 2ohms. Recommended amplifier rating: 400-1,000 watts @ 2ohms. INCLUDED HARDWARE D = Driver P = Passenger...
INSTALLATION Step 1 Lift up the Rear seat to expose the left and right seat mounting bolts. Use a 18mm socket to loosen the hex bolts enough to allow the brackets to slide under the seat brackets. Seat Bolts Seat Bolts Step 2 Attach the Driver and Passenger Enclosure...
Page 4
INSTALLATION Step 3 Place the speaker enclosure in the vehicle with the rear of the enclosure facing the back seat. Route speaker wire to the rear of the enclosure and connect using either the Push Terminals or the Quick-Plug connector. Red = Positive (+) Black = Negative (-) NOTE: Do not connect speaker...
SPECIFICATIONS Model Number TXGM14D10 Speaker Model SPC-10S4 (x2) Subwoofer Size Dual 10” Voice Coil Single 4 ohm Enclosure DC Resistance (Re) 2 ohm Sensitivity 1W/M (SPL) 86 dB Frequency Response 20Hz - 250Hz RMS Power Min 400w - Ideal 800w -Max 1200w Total Weight 45.6 lbs Height...
Need help?
Do you have a question about the Stinger TXGM14D10 and is the answer not in the manual?
Questions and answers