ARUVO MI-MFS900B Instruction Manual

Thank you for choosing this Led light mirror. To ensure proper opera�on and to
maintain the lifespan of this, Please read this manual carefully before use and
keep them handy for future reference. Installa�on should be carried out by a
qualified electrician.
Products Size Specifica�ons
Type
MI-MFS900B W900XH750mm Or W750xH900mm
MI-MFS900B MI-MFS1200B W1200xH750mm
MI-MFS1500B W1500xH750mm
MI-MFS1800B W1800xH750mm
General Instruc�ons
• This product confirms to AS/NZS safety standards and must be installed in
accordance with current IEE wiring regula�ons and building regula�ons (Part P).
• This Product must be earthed, and should not be connected to an unearthed
circuit.
• If there are only two wires coming your power supply , it means this fi�ng
MI-MFS1200B
can be wired to an unearthed circuit.
• Ensure that connec�ons are turned off at the consumer unit or fuse board
before installing or carrying out any maintenance.
• This product is for indoor use only.
• This product is IP44 Rated and can be installed in bathroom Zone2(as defined
by the IEE wiring regula�ons) and beyond. Please see bathroom diagram below.
MI-MFS1500B
zone
MI-MFS1800B
LED LIGHT MIRROR INSTRUCTION MANUAL
Size (mm)
This one can be installed horizontally or ver�cally.
IEE Bathroom Zones Diagram
60CM
zone
1
zone
2
2
Important Notes
• The product is fragile. Be careful during unpacking and installa�on;
• The product should be cleaned by standard detergents and so� co�on cloth.
It is recommended that the product is cleaned with a so�, dry, non abrasive
cloth.
• Luminaires should be installed so that any exposed metal work is not in
electrical contact with any part of the electrical installa�on connected to a
Remark
protec�ve conductor;
• If the external flexible cable or cord of this luminaire is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar
qualified person in order to avoid a hazard;
• When working at heights, please use a suitable pla�orm to work from.
• For new installa�ons, check for any electrical cables or pipe work
(gas/water) in the vicinity of the intended moun�ng point before proceeding
with the installa�on.
• Ensure that the fixing loca�on is able to take the weight of the complete
fi�ng.
• Wear suitable eye protec�on when drilling. Be careful when using power
tools near water.
• Do NOT strike mirror glass with hard or pointed items.
• Do NOT use cleaning unstandard agents or abrasive materials on any type of
finished surface.
• Do NOT allow moisture to come into contact with the electrical
components.
Wiring
This product is manufactured to class I category and requires an earth
connection
COLOUR CODING:
60CM
L - Live = Brown
- Neutral = Blue
- Earth = Green & Yellow
zone
2
225cm
V01.Feb.2022