Advertisement
Quick Links
Minitek
®
1.25mm Hand Tool
The FCI Basics' crimping hand tool is professionally designed for
applications in the prototyping phase or small production quantities.
The hand tool has a mechanism which opens automatically after making
the last advance of the ratchet. There are 2 different tools depending on
the wire gauge and terminal needed.
These hand tools are dedicated for the Minitek
product.
Minitek
®
1.25mm wire-to-board connector system is designed for a
wide variety of applications in Industrial, Automotive, and Consumer
markets.
The comprehensive range consists of terminals, crimp housings and PCB
headers in straight and right angle, surface mount and through-hole
configurations. It is available in 2 to 15 circuits in a single row.
§
Minitek
®
Hand tool P/N:
- 10168630-001HT (AWG 28-30)
- 10168631-001HT (AWG 26-28-30)
§
Contact P/N:
- 10114827 to be used with 10168630-001HT
- 10155245 to be use with 10168631-001HT
§
Ergonomic handle for an optimal grip
Amphenol CS recommends using the hand tool for prototyping and small production quantities.
This tool should only be used for the terminals and wire gauges specified in this document.
To learn more about how to use our all-in-one Crimping Hand Tool,
www.amphenol-cs.com
®
1.25mm Crimp-to-Wire
click
to watch the video.
TARGET MARKETS
Advertisement
Related Manuals for FCI Minitek AWG 28-30
Summary of Contents for FCI Minitek AWG 28-30
- Page 1 Minitek ® 1.25mm Hand Tool The FCI Basics’ crimping hand tool is professionally designed for applications in the prototyping phase or small production quantities. The hand tool has a mechanism which opens automatically after making the last advance of the ratchet. There are 2 different tools depending on the wire gauge and terminal needed.
- Page 2 Hand Tool Assembly Minitek 1.25mm Hand Tool P/N: ® 10168630-001HT/10168631-001HT Tool Head Unlock 2 pins by pushing Open the handles and Extract the pins. towards them. insert the tool head into the open holes. The laser marking of both parts should match.
- Page 3 Premature Release of the Hand Tool In case of an assembly mistake / operating fault the pliers can be opened prematurely by unlocking the integrated ratchet by pushing the handles gently together and at the same time releasing the locking lever. By doing so the handles can be opened completely and the crimp contact can be released.
Need help?
Do you have a question about the Minitek AWG 28-30 and is the answer not in the manual?
Questions and answers