Geshelli Labs ENOG2 Pro DAC Instructions

WARRANTY
This warranty information only applies to our products sold in the United States. Geshelli Labs LLC
does not sell any products outside of the Continental United States. Please email
info@geshelli.com for questions about our products or to initiate a return.
Geshelli Labs LLC will not accept the return of or warranty any product that has been tampered with
or has been altered.
Within the first 30 days of your purchase, Geshelli Labs LLC will accept return of the product if it
meets the following condition:
•
Product must be in original condition with all parts intact.
•
Liquid damage to the product is not covered under warranty.
•
All returns must include original receipt showing product was purchased through
Geshelli Labs LLC website or Geshelli E-commerce offerings.
•
Serial number of the returned unit must match the invoice and our database records.
31 days to 6 months -limited warranty- if your device fails due to component defect, Geshelli Labs
LLC will repair or replace the defective board. All components must be intact and product must not be
tampered with or show any damage by liquids.
We make no warranty regarding any transactions, products or services executed through any third
party vendor. Geshelli Labs LLC does not authorize any third party vendor to sell our products.
Geshelli Labs LLC is the manufacturer and all sales are only through the Geshelli Labs LLC website
or E-Commerce sites under the name Geshelli. The consumer understands and agrees that any
transactions through third party vendors under any other name are conducted entirely at your own
risk. Any warranty that is provided in connection with any offerings or services through a third party is
provided solely by the third party and will not transfer or be honored by Geshelli Labs LLC.
WARNING
If this device feels hot to the touch, discontinue use and unplug until it cools. If device overheats it could
damage the unit or cause spark or fire. Always ensure the device has adequate ventilation and air flow.
Do not cover this device with fabric material or anything that could affect air flow. Blocking air flow could
affect performance of the device and could pose a risk or fire or explosion, which could lead to serious
bodily injury or damage to the device and/or property.
To reduce the risk of fire or shock, do not submerge the device under water or any other liquid. Always
unplug device during a storm. It is recommended that the buyer use a power surge protection device in
conjunction with our products.
Do not disassemble this device. Opening the device could cause electric shock or render the device
inoperable.
Do not unscrew the case fasteners. Removing screws will void the warranty. The fasteners are small
parts that could cause choking harm or death to small children.
This device has corners that are not rounded. Please ensure proper care when handling this device to
avoid any skin or body damage that could occur with improper handling.
Geshelli Labs LLC will not be responsible or liable for any device which has been modified, altered or
disassembled.
This device is not sealed and is not waterproof. Do not allow liquid to spill on the product or submerge
this product in water.
WARNING: This product can expose you to chemicals including
the State of California to cause cancer, and Ethyl acrylate which is [are] known to the State of California
to cause birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov
All Intellectual Property of the ENOC Pro DAC device including but not limited to the design, pictures,
drawings, photos, marketing material, description, website, software, parts, logo and brand name is the
property of Geshelli Labs LLC and is protected by State and Federal Laws. You may not infringe or
otherwise violate the rights secured by Geshelli Labs LLC. You as the user/consumer will not modify,
reverse engineer, disassemble or otherwise attempt to copy code, design or logo.
FCC Part 15 Information
This device has been tested and verified compliant under title 47 part 15. The device complies with the
limits for Class A device pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
Acrylic Acid which is [are] known to
IP and FCC Part 15