ProxiMity FL20 Quick Start Manual

Thank you for purchasing the FL20 Multi-Technology RFID Reader!
The FL20 is a high performance multi-technology reader reading 125KHz/Mifare/FeliCa card serial numbers. It
is the best choice for system integrators because of its wide range of power inputs ( between 5V to 18VDC). The
Three-in-One interface, RS232, MSR ABA TK2 and Wiegand allowing it to integrate with a variety of applications,
especially security access control.
* Mifare is a registered trademark of Phillips Electronics N.V.
* FeliCa is a registered trademark of Sony Inc.
Specification
Power Requirements
Interface
Typical Maximum Read
In ideal conditions
Frequency
Transponder
Audio/Visual Indication
Dimensions
Housing material
Interface Cable
Environment
Output Assignment
Red
Black
White
Green
Blue
Orange
Yellow
Brown
Proximity Reader FL20
5~18 Volts regulated DC at 200 mA typical with a 12V supply.
A linear regulator is recommended .
Wiegand , Magstripe ,9.6K Baud Serial ASCII (RS232)
or special to customer specifications .
125KHz EM format, 13.56 MHz Mifare ISO 14443A standard, 13.56MHz FeliCa
ISO18092 standard, Maximum reading distance. Up to 30 mm at 5V-18V with
Mifare ISO card if an ideal conditions ; up to 80 mm at 5V~18V with 125KHz EM
format card if an ideal conditions .
13.56MHz / 125KHz
Read only ( for unique serial number/unique identifier).
Internal LED and Buzzer
78(L) x 43(W) x 15(D) mm
ABS
90 cm
Operation Temp : -10 to 60 Deg C.
Storage Temp : -15 to 65 Deg C.
Humidity : 10 ~ 90 % relative
Power 5-18 Volt
Ground 0 Volt
Clock Output (Magstripe , Wiegand 1) 2K2 pull up
Data Output (Magstripe ,Wiegand 0) 2K2 pull up
RS232 RXD
Card Present Output 2K2 pull up
RS232 TXD & Program Input 2K2 pull up
LED (External source Connect to GND 0 Volts only for Wiegand and Magstripe
interface).
TM951204-1
Page 1/4