Page 1 Operating Instructions For safe and correct use, be sure to read Safety Information separately provided before using the machine.
Page 3: Introduction
Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. For safe and correct use, be sure to read the Safety Information in "Read This First" before using the machine.
Page 4: How To Read This Manual
How to Read This Manual Symbols This manual uses the following symbols: Indicates points to pay attention to when using functions. This symbol indicates points that may result in the product or service becoming unusable or result in the loss of data if the instructions are not obeyed.
Page 5: About The Model Names Of This Machine
This is the abbreviated name for this product. In this document, the term "this machine" is mainly used, while "RICOH Monitor" is used to refer to the 150 models or 150BW models other than this machine. Device In this manual, the term "device" is used exclusively for personal computers, smartphones, and other devices that are connected to this machine via a wired or wireless connection.
Page 6 USB PD Charger This charger supports the USB PD (USB Power Delivery) standard.
Page 7: Table Of Contents
TABLE OF CONTENTS Introduction ........................... 1 How to Read This Manual ...................... 2 Symbols ..........................2 Disclaimer .......................... 2 Notes ..........................2 About the Model Names of this Machine ................3 Terminology ........................3 1. Overview Things You Can Do with the Machine .................. 10 Things That You Can Do with All Models .................
Page 8 Using OS Functions to Connect Directly to Devices ............43 Using the Application to Connect to Devices in the Same Network ......44 Using the Application to Connect to Multiple RICOH Monitors at the Same Time ..45 Network Environment ...................... 46 Supported OS for Wireless Connection ................
Page 9 Displaying the Touched Traces ..................86 Muting Sound ........................87 Disabling Screen Display/Sound/Touch Operation Temporarily ........87 Disconnecting ........................88 Settings ..........................88 Displaying the Sub-screen ....................88 Splitting the Screen ......................90 Ending a Connection ......................92 Disconnecting from This Machine ................... 92 Disconnecting from a Device ...................
Page 10 Messages Related to the On-screen Display Menu ............119 Messages Related to Screen Display ................121 Messages Related to Wireless Connection ..............122 Messages Related to RICOH Monitor Mirroring for macOS/RICOH Monitor Mirroring for iOS ..........................124 Messages Related to RICOH Monitor Multicast for Windows ........125 When You Cannot Use the Machine As You Want ............
Page 11: Overview
1. Overview This section provides an overview of the product and the names and functions of the various parts.
Page 12: Things You Can Do With The Machine
1. Overview Things You Can Do with the Machine Things That You Can Do with All Models Connecting to a computer or another device to display the screen Connect this machine to a computer, smartphone, or another device with a USB Type-C cable to display the device's screen.
Page 13 Broadcasting the screen of connected devices (Windows only) An application can be used to broadcast the Windows screen to multiple RICOH Monitors connected via the wireless connection. page 67 "Using the Application to Connect to Multiple RICOH Monitors at the Same Time (Windows)"...
Page 14 1. Overview Charging this machine You can charge the machine by connecting it to a device that supports the USB PD standard or to a commercially available USB PD charger. page 107 "Charging This Machine (150BW Model Only)"...
Page 15: Component Names And Functions
Component Names and Functions Component Names and Functions Right Side 1. Power LED This indicates the status of this machine. 150 model Color Status Power off White Power on 150BW model Color Status Power off • When the light turns OFF during battery charging...
Page 16 1. Overview For details, see page 29 "Turning On and Off the Power". 3. Menu/Select/Enter button The Menu/Select/Enter button has the following controls: • Pressing the center of the button • Sliding the button up or down The differences in the condition of this machine and the operation of its buttons are as follows: •...
Page 17: Back Side
Component Names and Functions When the On-screen Display menu is displayed, it returns to the previous screen. For details about the On-screen Display menu, see page 111 "Operating the On- screen Display Menu". Back Side 1. Top: USB port 1 (Type-C)/Bottom: USB port 2 (Type-C) Connect this machine to a computer, smartphone, or another device for video and audio input.
Page 18: Regarding Commercially Available Products
1. Overview Regarding Commercially Available Products This section describes the commercially available products that can be used with this machine. • Do not use adapters/chargers or conversion connectors for USB standards other than Type-C. The use of commercially available products not included in the description could cause this machine to malfunction.
Page 19: Preparations For Using The Machine
• USB Type-C cable • Cable clamps • Sleeve case • Read This First • Quick Guide • License Code for "RICOH Monitor Multicast for Windows" (150BW Model Only) • Warranty card *1 *2 • EU ErP Lot5 label (UK/EU) *1 *2 •...
Page 20: When Using This Machine For The First Time
2. Preparations for Using the Machine When Using this Machine for the First Time When using this machine for the first time, perform the following operations: Attaching Cable Clamps 1. Remove the stickers from the supplied cable clamps ( 4). 2.
Page 21: Connecting Cable
When Using this Machine for the First Time Connecting Cable 1. Connect the supplied USB Type-C cable to the USB port of this machine. 2. Lift up the left end of the cable holder, pass the cable through, and then return the cable holder to its original position.
Page 22: Charging This Machine (150Bw Model Only)
2. Preparations for Using the Machine Charging This Machine (150BW Model Only) • When using a commercially available USB PD charger, be sure to use one specifically for USB Type-C. The use of adapters/chargers or conversion connectors for other USB standards could result in a malfunction of this machine.
Page 23 When Using this Machine for the First Time 3. Remove the USB Type-C cable from the device or USB PD charger when the power LED turns OFF and charging is complete. To continue with the initial settings for wireless connection, proceed to page 22 "When Using the Wireless Connection for the First Time (150BW models only)".
Page 24: When Using The Wireless Connection For The First Time (150Bw Models Only)
2. Preparations for Using the Machine When Using the Wireless Connection for the First Time (150BW models only) Changing the Initial Settings When using the wireless connection for the first time, a screen for the initial settings of the device is displayed. •...
Page 25 When Using the Wireless Connection for the First Time (150BW models only) 3. Slide the Menu/Select/Enter button up or down to select [Wireless Connection]. 4. Press the center of the Menu/Select/Enter button. The initial settings screen for the wireless connection appears. In the initial settings screen, touch the screen to operate.
Page 26 2. Preparations for Using the Machine 5. Select the language if necessary, and then touch [OK]. 6. Change the device name if necessary, and then touch [OK]. Enter the device name using four to 30 single-byte alphanumeric characters. The initial settings are completed, and the Waiting to Connect screen appears. To continue with the wireless connection, proceed to page 43 "Connecting the Device via Wireless Connection (150BW models only)".
Page 27: Basic Usage
3. Basic Usage Operation Flow The basic operation flow of this machine is as follows: 1. Remove this machine from its sleeve case. 2. Open the stand and adjust the angle. page 27 "Using the Stand" 3. Connect it to a computer, smartphone, or another device. •...
Page 28 Display and playback the screen and audio of the connected device on this machine. • Screen sharing Using a free application, the Windows screen can be broadcasted to multiple RICOH Monitors connected via a wireless connection. • Touch operation Operate connected devices by touching the screen of this machine with your finger.
Page 29: Using The Stand
Using the Stand Using the Stand • Do not apply strong force or impact from the screen side of this machine while the stand is open. Doing so could cause damage to the stand. • Do not attempt to open the stand to an angle greater than the maximum angle (148°) or to apply strong force in the direction of further opening when the stand is opened to the maximum angle.
Page 30 3. Basic Usage Turn the stand 90° to use this machine in portrait orientation. • Handwriting Set the stand at 148° for easy writing with a finger or stylus pen (optional). 3. Return the stand to the storage position when finished using it.
Page 31: Turning On And Off The Power
1. Press the Power button. The power LED turns ON white, and the machine starts up. When using the 150 model When a device that supports the USB PD standard or a USB PD charger is connected to this machine, the power of this machine automatically turns ON.
Page 32: Turning Off The Power
3. Basic Usage Turning Off the Power When there is no video/audio input from the connected device and no operation for a certain period of time, this machine automatically turns OFF. To turn OFF the power manually, perform the following operation: 1.
Page 33: Switching Inputs
When using the wireless connection for the first time (150BW model only) or when multiple devices are connected to the machine, the input method must be switched manually. 1. Press the Switching Input/Back button. • 150 model • 150BW model The Switching Input screen appears.
Page 34 3. Basic Usage • 150 model • 150BW model 2. Slide the Menu/Select/Enter button up or down to select the input method. 3. Press the center of the Menu/Select/Enter button.
Page 35 Switching Inputs The display switches to the screen of the selected input method.
Page 36: Changing The Volume
3. Basic Usage Changing the Volume 1. Slide the Menu/Select/Enter button up or down when the On-screen Display menu or Switching Input screen is not displayed. • Increase the volume Slide the Menu/Select/Enter button up. • Decrease the volume Slide the Menu/Select/Enter button down. •...
Page 37: Storing This Machine
Storing this Machine Storing this Machine When you are finished using this machine, store it in the sleeve case with the USB Type-C cable connected. 1. Pass the USB Type-C cable through the cable clamps. • Example of cable and cable clamps usage 2.
Page 38 3. Basic Usage...
Page 39: Connecting The Device Via Wired Connection
4. Connecting the Device via Wired Connection This section explains how to connect this machine to a device such as a computer or smartphone with a USB Type-C cable to display and playback video and audio from the device on this machine. Overview of Wired Connection Supported OS for Wired Connection For details about operating systems of devices that support wired connection, see...
Page 40: Connecting To A Device
Connecting to a Device Windows/macOS 1. Connect the USB Type-C cable to the device. When using the 150 model • When the connected device is turned ON This machine automatically turns ON. • When the connected device is turned OFF When the device is turned ON, this machine automatically turns ON.
Page 41: Ios
If you manually switch the input method, you can switch to the screen of the other device. For details, see page 31 "Switching Inputs". To connect to an iOS device equipped with a Lightning port, you need the following equipment, which is common for 150/150BW models:...
Page 42 4. Connecting the Device via Wired Connection 1. HDMI to USB Type-C conversion cable 2. Apple conversion adapter "Lightning Digital AV Adapter" (conversion adapter) 3. USB PD charger with an output of 15 W or more Follow the steps below to connect this machine to a device. 1.
Page 43: Android
Connecting to a Device Android 1. Connect the USB Type-C cable to the device. When using the 150 model • When the connected device is turned ON This machine automatically turns ON. • When the connected device is turned OFF When the device is turned ON, this machine automatically turns ON.
Page 44 4. Connecting the Device via Wired Connection 2. Operate this machine according to the purpose. The following features are available on Android: • Video display/audio playback • Touch operation • Two devices can be connected to this machine simultaneously using USB port 1 and USB port 2, but only one of the devices can be selected as the input method and displayed on this machine.
Page 45: Connecting The Device Via Wireless Connection (150Bw Models Only)
• page 43 "Using OS Functions to Connect Directly to Devices" • page 44 "Using the Application to Connect to Devices in the Same Network" • page 45 "Using the Application to Connect to Multiple RICOH Monitors at the Same Time"...
Page 46: Using The Application To Connect To Devices In The Same Network
Using the Application to Connect to Devices in the Same Network Use RICOH Monitor Mirroring for macOS or RICOH Monitor Mirroring for iOS to connect to devices in the same network as this machine via an access point.
Page 47: Using The Application To Connect To Multiple Ricoh Monitors At The Same Time
For details about supported operating systems, see Supported OS, a separately provided manual. • All connected RICOH Monitors and devices must be connected to the same network (same subnet). Up to 32 RICOH Monitors can be connected simultaneously, enabling Windows screen...
Page 48: Network Environment
• Using the relevant OS function • Using RICOH Monitor Mirroring for macOS/iOS • Using RICOH Monitor Multicast for Windows • Using RICOH Monitor Auto Cast for Windows • The IP address of this machine is automatically assigned by DHCP. Network Environment...
Page 49: Using The Application To Automatically Connect To Ricoh Monitors
Overview of Wireless Connection Using the Application to Automatically Connect to RICOH Monitors Use RICOH Monitor Auto Cast for Windows to connect RICOH Monitor in the surrounding and device. For details about supported operating systems, see Supported OS, a separately provided manual.
Page 50: About The Wireless Connection Screen
5. Connecting the Device via Wireless Connection (150BW models only) About the Wireless Connection Screen This section describes the screens related to wireless connection. Waiting to Connect Screen This screen is first displayed when this machine is started up while [Wireless Connection] is selected in the Switching Input screen.
Page 51: Connecting Screen
About the Wireless Connection Screen Connecting Screen This screen is displayed when a connection is successfully established from the device side. The connecting screen displays a menu of display and audio functions. 1. Menu You can use functions related to display, audio, etc. For details, see page 50 "Icons of the menu displayed on the Connecting screen".
Page 52 5. Connecting the Device via Wireless Connection (150BW models only) Icons of the menu displayed on the Connecting screen Icons that are always displayed Icon Description Toggles between showing and hiding the icons displayed in the menu You can also change the display position of the menu by touching Change Icon and moving the icon.
Page 53 Swaps the screen positions This icon appears only when the split screen is turned ON. Swap Screens • page 91 "Switching the screen placement" Icons displayed only when connected to RICOH Monitor Multicast for Windows Icon Description Cannot perform touch operations...
Page 54: Settings Screen
5. Connecting the Device via Wireless Connection (150BW models only) Icon Description Touch • When touch operations are not allowed in RICOH Monitor operation Multicast for Windows permission • When touch operations are allowed in RICOH Monitor Multicast for Windows, but touch operations cannot be performed on this...
Page 55 About the Wireless Connection Screen 4. Firmware You can check and update the firmware version related to the wireless connection. For details, see page 101 "Firmware". 5. Reset You can initialize the settings of this machine. For details, see page 103 "Reset". 6.
Page 56: Using Os Functions To Connect Directly To A Device (Windows/Android)
5. Connecting the Device via Wireless Connection (150BW models only) Using OS Functions to Connect Directly to a Device (Windows/Android) You can connect directly to a device using Wi-Fi Direct without going through an access point. • The device to be connected must support Miracast. •...
Page 57 Using OS Functions to Connect Directly to a Device (Windows/Android) 2. Click [Connect]. When using the shortcut keys, press the "Windows logo key" (Start key) and the "K" key on the keyboard at the same time. • When using Windows 11 1.
Page 58 5. Connecting the Device via Wireless Connection (150BW models only) 4. Confirm the name of the Windows device to be connected with the message displayed on this machine, and then touch [OK]. The connection is started. 5. When using touch operation or stylus pen operation with this machine, check the "Allow mouse, keyboard, touch, and pen input from this device"...
Page 59: Connecting With Android
Using OS Functions to Connect Directly to a Device (Windows/Android) Connecting with Android When this machine is turned ON, it enters the standby state for connection, and the connecting operation is performed from the device side. Once the connection is accepted by this machine, a wireless connection will be established.
Page 60 5. Connecting the Device via Wireless Connection (150BW models only) 4. Tap the device name of the machine that you want to connect. If Android successfully communicates with this machine, a message appears on the machine to confirm whether the connection is allowed or not. If the device to be connected is already registered in the Connection list of this machine, the message does not appear.
Page 61: Using The Application To Connect To Devices In The Same Network (Macos/Ios)
Devices in the Same Network (macOS/iOS) Use RICOH Monitor Mirroring for macOS or RICOH Monitor Mirroring for iOS to connect to devices in the same network as this machine via an access point. • This machine and the device must be connected to the same network (same subnet).
Page 62 6. Touch [OK]. 7. If the connection is successful, touch [Back]. To continue to start the connection, proceed to page 61 "Connecting with RICOH Monitor Mirroring for macOS" or page 63 "Connecting with RICOH Monitor Mirroring for iOS". • Once the connection is successfully established, the network settings are saved in this machine.
Page 63: Connecting With Ricoh Monitor Mirroring For Macos
Make sure that the OS of the device on which the application is to be installed has the latest security patches and update them, as necessary. Search for "RICOH Monitor Mirroring" in the Mac App Store, and then download the application.
Page 64 5. Connecting the Device via Wireless Connection (150BW models only) When using RICOH Monitor Mirroring for macOS for the first time, a message will appear asking if you want to allow screen recording. After confirming the displayed message and performing the operation to allow it, close RICOH Monitor Mirroring for macOS and start it again.
Page 65: Connecting With Ricoh Monitor Mirroring For Ios
Make sure that the OS of the device on which the application is to be installed has the latest security patches and update them, as necessary. Search for "RICOH Monitor Mirroring" in the App Store, and then download the application.
Page 66 5. Connecting the Device via Wireless Connection (150BW models only) 2. Start RICOH Monitor Mirroring for iOS. When RICOH Monitor Mirroring for iOS starts, the search for RICOH Monitors in the same network starts, and a list of such is displayed.
Page 67 Using the Application to Connect to Devices in the Same Network (macOS/iOS) 4. Tap [Start Broadcast]. If RICOH Monitor Mirroring for iOS successfully communicates with this machine, a message appears on the machine to confirm whether the connection is allowed or not.
Page 68 5. Connecting the Device via Wireless Connection (150BW models only) • By registering the information of a device in the Connection list, it can be connected to this machine without having to allow the connection on the device. For details, see page 101 "Connection List".
Page 69: Using The Application To Connect To Multiple Ricoh Monitors At The Same Time (Windows)
Using the Application to Connect to Multiple RICOH Monitors at the Same Time (Windows) Using the Application to Connect to Multiple RICOH Monitors at the Same Time (Windows) Use RICOH Monitor Multicast for Windows to connect multiple RICOH Monitors and devices in the same network.
Page 70 6. Touch [OK]. 7. If the connection is successful, touch [Back]. To continue to start the connection, proceed to page 69 "Connecting with RICOH Monitor Multicast for Windows". • Once the connection is successfully established, the network settings are saved in this machine.
Page 71: Connecting With Ricoh Monitor Multicast For Windows
Using the Application to Connect to Multiple RICOH Monitors at the Same Time (Windows) • To automatically connect to a network saved on this machine when it is detected, select the "Auto-connect to saved networks" check box. Connecting with RICOH Monitor Multicast for Windows Installing RICOH Monitor Multicast for Windows •...
Page 72 3. Touch operation permission Toggles the touch operation or stylus pen operation permission enable / disable. The allowed RICOH Monitor can be changed at any time. You can also set the touch operation permission in "Connected Device Settings". For details how to specify, see page 75 "Specifying RICOH Monitors to be connected".
Page 73 You can specify to automatically connect wirelessly when turning ON RICOH Monitor and starting RICOH Monitor Multicast for Windows. 1. Turn ON all RICOH Monitors to be used and confirm that the Waiting to Connect screen is displayed. For details about how to turn ON the machine, see page 29 "Turning On and Off the Power".
Page 74 • Turn OFF the power of the RICOH Monitor How to connect wirelessly when auto connection is disabled 1. Turn ON all RICOH Monitors to be used and confirm that the Waiting to Connect screen is displayed. For details about how to turn ON the machine, see page 29 "Turning On and Off the...
Page 75 When you connect a group wirelessly in manual. For details about how to specify a group, see page 76 "Specifying a RICOH Monitor group for connection". 1. Turn ON all RICOH Monitors to be used and confirm that the Waiting to Connect screen is displayed.
Page 76 5. Connecting the Device via Wireless Connection (150BW models only) 2. Start RICOH Monitor Multicast for Windows. When RICOH Monitor Multicast for Windows starts, the search for RICOH Monitors in the same network starts and the list of such is displayed.
Page 77 Monitor is successful, a message appears on each RICOH Monitor to confirm whether the connection is allowed or not. If the device to be connected is already registered in the Connection list of RICOH Monitor, the message whether the connection is allowed or not is not displayed.
Page 78 4. Touch operation permission Toggles the touch operation or stylus pen operation permission enable / disable If you want to permit touch operations and stylus pen operations on a RICOH Monitor, toggle on "Touch operation permission" of the RICOH Monitor you want to give the permission.
Page 79 Using the Application to Connect to Multiple RICOH Monitors at the Same Time (Windows) Creating a new group 1. Click [Create New]. 2. Enter a group name in the "Group name" field. 3. Check the checkboxes of RICOH Monitors you want to group.
Page 80 5. Connecting the Device via Wireless Connection (150BW models only) Editing the created group You can change the group name and adding RICOH Monitors belonging the created group. 1. In the "Connection Group Settings" screen, click the group name you want to edit, and then click "Edit Group".
Page 81 Using the Application to Connect to Multiple RICOH Monitors at the Same Time (Windows) Deleting the group 1. In the "Connection Group Settings" screen, click the group name you want to delete, and then click [Delete Group]. 2. A confirmation screen will be displayed, then click [OK].
Page 82 5. Connecting the Device via Wireless Connection (150BW models only) 2. Enter a password in the "Password" field. Specify a password using 10 to 64 single-byte alphanumeric characters. 3. In the "Confirm password" field, enter the password you entered in step 2 again. 4.
Page 83: Using The Application To Connect To Ricoh Monitor Automatically (Windows)
Using the Application to Connect to RICOH Monitor Automatically (Windows) Use RICOH Monitor Auto Cast for Windows to connect the machine directly to a device using Wi-Fi Direct without going through an access point. • The device to be connected must support Miracast.
Page 84 Toggles the auto connection enable / disable When specifying the auto connection to enable, the connectable RICOH Monitors start to wirelessly connect to the device. Only one RICOH Monitor can communicate at a once. You can set the auto connection in "Connected Device Settings". For details, see page 84 "Specifying RICOH Monitors to be connected".
Page 85 You can specify the setting so that a wireless connection is established automatically when you turn ON a RICOH Monitor and start RICOH Monitor Auto Cast for Windows. 1. Turn ON the RICOH Monitor you will use, and then confirm that the Waiting to Connect screen is displayed.
Page 86 5. Connecting the Device via Wireless Connection (150BW models only) 3. Toggle on "Auto connection" of a RICOH Monitor for which you want to specify auto connection. To enable the touch operation permission, toggle "Touch operation permission" on. You can also specify the auto connection and the touch operation permission in "Connected Device Settings".
Page 87 3. Auto connection Toggles the auto connection enable / disable When specifying the auto connection to enable, the connectable RICOH Monitors start to wirelessly connect to the device. Only one RICOH Monitor can communicate at a once. 4. Touch operation permission Toggles the touch operation or stylus pen operation permission enable / disable The permitted RICOH Monitor can be changed at any time.
Page 88: Things You Can Do On The Connecting Screen
5. Connecting the Device via Wireless Connection (150BW models only) Things You Can Do on the Connecting Screen This section describes the functions available on the Connecting screen. Rotating the Screen You can rotate the screen display of this machine according to the size of the screen of the connected device or the usage purpose of this machine.
Page 89: Muting Sound
Things You Can Do on the Connecting Screen 1. Touch [Touch Trace] ( ). The icon display turns to , and the Touch Trace turns ON. The touched trace is displayed as a dotted line. The trace display disappears after two seconds. 2.
Page 90: Disconnecting
5. Connecting the Device via Wireless Connection (150BW models only) When Mute AV is turned ON, the following states are set, respectively: • Screen display: Hidden • Sound: Mute • Touch operation (stylus pen operation): Inoperable 1. Touch [Mute AV] ( ). The icon display turns to , and screen display/sound/touch operation (stylus pen operation) is disabled.
Page 91 Things You Can Do on the Connecting Screen 2. To finish the sub-screen display, touch [Sub-screen] ( ) again. • When both the sub-screen and the split screen are turned OFF, only the active screen is displayed. • If the sub-screen is turned ON while the split screen is ON, the split screen is automatically switched to OFF.
Page 92: Splitting The Screen
5. Connecting the Device via Wireless Connection (150BW models only) Shorten the distance between the two fingers. Changing the display position of the sub-screen 1. Touch and hold the sub-screen and move it in the desired direction. The display position of the sub-screen is fixed to the four corners of the screen. The display position of the sub-screen is changed to the corner of the screen closest to the position where the sub-screen was moved.
Page 93 Things You Can Do on the Connecting Screen Touching [Change Split-Position] ( ) three times returns the screen to the original split position. Switching the screen placement You can swap the screens when the split-screen is turned ON. 1. Touch [Swap Screens] ( ). The placement of the two screens is switched.
Page 94: Ending A Connection
Depending on the OS or application used, a disconnection message might appear on the device side. Close the message or close the application according to the displayed content. When using RICOH Monitor Mirroring for iOS, after tapping [OK] in the message, a screen broadcast appears. Tap [Stop Broadcast]. Disconnecting from a Device Disconnecting from Windows 1.
Page 95 Ending a Connection 2. Click [Cast]. If [Cast] does not appear, click the Edit Quick Settings icon (pen icon) in Quick Settings, and then click [Add] and select [Cast]. When using the shortcut keys, press the "Windows logo key" (Start key) and the "K"...
Page 96 Button names could differ depending on the version and model of Android used. The disconnection message is displayed on the machine and the Waiting to Connect screen appears. Disconnecting from RICOH Monitor Mirroring for macOS 1. Click [Stop Mirroring]. The disconnection message is displayed on the machine and the Waiting to Connect...
Page 97 Ending a Connection Disconnecting from RICOH Monitor Mirroring for iOS 1. Tap the red indicator at the top of the iOS screen or display the RICOH Monitor Mirroring for iOS screen and then tap [Stop Mirroring].
Page 98 Disconnecting from RICOH Monitor Multicast for Windows 1. Click [Stop Mirroring]. The disconnection message is displayed on each RICOH Monitor, and the Waiting to Connect screen is displayed. When the connection is disconnected from the RICOH Monitor side and when there...
Page 99: Changing Wireless Connection Settings
Changing Wireless Connection Settings Changing Wireless Connection Settings Displaying the Settings Screen • When the [Settings] screen is displayed from the [Connecting...] screen, you can change only the settings of [Dev.Info/Setting] and [Connection list]. However, you cannot change the device name. 1.
Page 100 5. Connecting the Device via Wireless Connection (150BW models only) • The device name cannot be changed when the Settings screen is displayed from the Connecting screen. Item Descriptions Device name Set the name of this machine to be displayed on the device when connecting from the device side.
Page 101 Changing Wireless Connection Settings Item Descriptions • When using RICOH Monitor Mirroring for macOS or RICOH Monitor Mirroring for iOS to connect to devices in the same network, you can connect to two devices regardless of the settings in this item.
Page 102: Wi-Fi
5. Connecting the Device via Wireless Connection (150BW models only) Item Descriptions • If you select "Do not allow" for "2 dev. simul. connection by OS func.", this setting becomes unavailable because the device selects the frequency. • page 54 "Connecting with Windows" •...
Page 103: Connection List
Changing Wireless Connection Settings Item Descriptions • A maximum of eight network settings are saved. If eight network settings have already been saved, the oldest network setting will be deleted first. Connection List You can manage connected devices. Item Descriptions Defaul Register to cxn Select whether or not to register the devices connected...
Page 104 • Do not connect a device such as a computer or smartphone to USB port 2. • Do not operate the Switching Input/Back button on this machine during updating. 1. Download the RICOH Monitor 150BW Firmware Updater to the computer used for the firmware update. 2. Touch [Firmware] ( 3.
Page 105: Reset
Changing Wireless Connection Settings Do not turn OFF the power of this machine or remove the USB Type-C cable while the update is in progress. 9. When the update is complete, click [Close]. This machine reboots automatically. Reset You can initialize the settings of this machine. The settings to be initialized are as follows: •...
Page 106 5. Connecting the Device via Wireless Connection (150BW models only)
Page 107: Charging
6. Charging Charging a Device Connected to This Machine (Pass-through Charging) You can charge a device such as a computer or smartphone connected to this machine using a commercially available USB PD charger and a commercially available USB Type-C cable (pass-through charging). •...
Page 108 6. Charging 3. Connect the USB Type-C cable to the USB PD charger. 4. Plug the USB PD charger into a power outlet. The device starts charging. 5. When charging of the device is complete, unplug the USB PD charger from the power outlet and remove the USB Type-C cable connected to this machine.
Page 109: Charging This Machine (150Bw Model Only)
Charging This Machine (150BW Model Only) Charging This Machine (150BW Model Only) A low battery limits the functions of this machine that can be used. Check the remaining battery level periodically and charge this machine, as necessary. Checking the Remaining Battery Level The remaining battery level can be checked in the On-screen Display menu.
Page 110 6. Charging • Make sure to use a commercially available USB PD charger with an output of 20 W or more. 1. Connect the USB Type-C cable connected to the USB port of this machine to a device that supports the USB PD standard or to a commercially available USB PD charger.
Page 111 Charging This Machine (150BW Model Only) 3. When charging is complete, remove the USB Type-C cable from the device. If using a USB PD charger, unplug the USB PD charger from the power outlet. To check when charging is complete: •...
Page 112 6. Charging...
Page 113: Changing Settings
7. Changing Settings This section describes how to operate the On-screen Display menu and its menu items. Operating the On-screen Display Menu You can change the screen brightness, contrast, color temperature, and other settings in the On-screen Display menu. 1. Press the center of the Menu/Select/Enter button. The On-screen Display menu is displayed.
Page 114 7. Changing Settings 3. Press the center of the Menu/Select/Enter button to confirm the selection. Changing "Brightness", "Contrast", or "Color Temp." from the factory default settings can increase the power consumption of this machine. A message appears when the relevant setting is displayed for the first time. If you agree with the contents of the message, press the center of the Menu/Select/Enter button.
Page 115 Operating the On-screen Display Menu screen Display menu, and then press the Switching Input/Back button again to close the On-screen Display menu. • 150 model • 150BW model...
Page 116: Setting Items In The On-Screen Display Menu
7. Changing Settings Setting Items in the On-screen Display Menu • When the message Low power mode appears, this machine is connected to a power source with an output of less than 15 W and the setting values of the setting items are restricted.
Page 117: Color Temp
Setting Items in the On-screen Display Menu Color Temp. Adjusts the color temperature • 9300K Displays images in a bluish tone • 8000K Displays images in a natural tone • 6500K Displays images in a reddish tone • 5000K Adjusts the tone to reduce the amount of blue light, which is harmful to the eyes •...
Page 118 7. Changing Settings Information Displays the software version and operating hours of this machine All Reset Initializes all settings in the On-screen Display menu After initialization, when the "Brightness", "Contrast", "Color Temp.", or "Volume" settings of this machine is/are first displayed, a message regarding the increased power consumption of this machine will be displayed again.
Page 119: Troubleshooting
• Check the model name of this machine to be used and check the description of the corresponding model name. For details about how to check the model name, see page 3 "About the Model Names of this Machine". Messages Related to Errors 150 model Message Causes Solutions...
Page 120: Messages Related To The Battery
8. Troubleshooting 150BW model Message Causes Solutions An internal power An error has occurred in Perform the following steps to clear error has occurred. the machine's internal the error. If the error is successfully power supply. cleared, the message will no longer Refer to the appear.
Page 121: Messages Related To The On-Screen Display Menu
Connect this machine to a USB low battery. below 2%. PD charger. Connect to power. Messages Related to the On-screen Display Menu 150 model Message Causes Solutions Low power mode [0-25] This machine is Connect this machine to a device...
Page 122 8. Troubleshooting Message Causes Solutions Low power mode [mute] This machine is Connect this machine to a device operating in low power that supports the USB PD mode because it is standard or a USB PD charger connected to a power with an output of 15 W or more.
Page 123: Messages Related To Screen Display
If the increase in power consumption is not acceptable, press the Switching Input/Back button. Messages Related to Screen Display 150/150BW model Message Causes Solutions No Video Input No video input from USB Connect the device to this machine...
Page 124: Messages Related To Wireless Connection
8. Troubleshooting Messages Related to Wireless Connection 150BW model Message Causes Solutions Failed to connect. Wireless connection to • Check that there are no the device failed. devices in the surroundings Try again. that generate radio waves that could interrupt wireless communication, and then try the wireless connection again.
Page 125 If a Message is Displayed during Operation Message Causes Solutions Cannot change network Wi-Fi screen was Disconnect the wireless while connecting. displayed during connection to the device before wireless connection. connecting to the network or Disconnect and set up changing networks. again.
Page 126: Messages Related To Ricoh Monitor Mirroring For Macos/Ricoh Monitor Mirroring For Ios
8. Troubleshooting Messages Related to RICOH Monitor Mirroring for macOS/RICOH Monitor Mirroring for iOS 150BW model Message Causes Solutions Not connected to the The device you are using Connect the device to the network. is not connected to the network.
Page 127: Messages Related To Ricoh Monitor Multicast For Windows
If a Message is Displayed during Operation Messages Related to RICOH Monitor Multicast for Windows 150BW model Message Causes Solutions This OS is not You are trying to install Install on a compatible OS. supported. Refer to the RICOH Monitor...
Page 128 Up to 5 devices can be The sixth RICOH Disconnect the connected RIOCH connected at the same Monitor was attempted Monitor, and then reconnect it. time. to be connected. The maximum number of RICOH Monitors that can be connected at one time is five.
Page 129: When You Cannot Use The Machine As You Want
• The machine might not operate normally, depending on the connected computer, smartphone, USB PD charger, or cable. For information about the models tested and verified for normal operation, visit our website. Problems Related to Power Supply 150 model Problem Possible cause Solutions...
Page 130 8. Troubleshooting Problem Possible cause Solutions A problem with USB Type-C Replace the USB Type-C cable. cable. USB Type-A to USB Type-C This machine cannot be used conversion cable is being with a Type-C conversion cable used. from a USB Type-A port. Use a cable with only USB Type- C cable terminals.
Page 131 When You Cannot Use the Machine As You Want Problem Possible cause Solutions The screen is switching. Due to the properties of the OLED panel, the screen displays completely dark at the timing when the black screen is displayed. Check the power status of this machine with the power LED.
Page 132 8. Troubleshooting Problem Possible cause Solutions Insufficient power is being Replace with a USB PD charger supplied to this machine with an output of 7.5 W or higher. from the USB PD charger being used. There is no function to Connect this machine to a USB supply power from the PD charger.
Page 133: Problems Related To The Battery
When You Cannot Use the Machine As You Want Problem Possible cause Solutions The screen is switching. Due to the properties of the OLED panel, the screen displays completely dark at the timing when the black screen is displayed. Check the power status of this machine with the power LED.
Page 134: Problems Related To Pass-Through Charging
Type-C conversion cable from a USB used. Type-A port. Use a cable with only USB Type-C cable terminals. Problems Related to Pass-through Charging 150/150BW model Problem Possible cause Solutions Device connected to this The power consumption Pass-through charging is not...
Page 135 When You Cannot Use the Machine As You Want Problem Possible cause Solutions Supported OS, a separately The machine does provided manual not respond when the screen is There is a problem with the Update the driver for the device. touched.
Page 136 8. Troubleshooting Problem Possible cause Solutions The function button The OS or device does not Check whether the OS or the on the stylus pen is support touch operation. device supports touch operation. not responding. Supported OS, a separately provided manual There is a problem with the If the touch operation does not application that you are...
Page 137 When You Cannot Use the Machine As You Want 150BW model Problem Possible cause Solutions The machine does The OS or device does not Check whether the OS or the not respond when support touch operation. device supports touch operation. the screen is Supported OS, a separately touched.
Page 138 When this machine is Specify "Run as Administrator" connected using RICOH when you start RICOH Monitor Monitor Multicast for Multicast for Windows or RICOH Windows or RICOH Monitor Monitor Auto Cast for Windows. Auto Cast for Windows, if...
Page 139 When You Cannot Use the Machine As You Want Problem Possible cause Solutions page 54 "Connecting with Windows" The OS or device does not Check whether the OS or the support touch operation. device supports touch operation. Supported OS, a separately provided manual There is a problem with the Update the driver for the device.
Page 140 8. Troubleshooting Problem Possible cause Solutions While using the The connected device does Use devices that support palm stylus pen, the not support palm rejection (a rejection. device reacts when feature that recognizes only part of the hand the stylus pen touch without touches the screen.
Page 141: Problems Related To Images
The network signal condition Check the network status and is poor. reconnect. Problems Related to Images 150 model Problem Possible cause Solutions No image is This machine is turned OFF. Turn ON the power of this displayed.
Page 142 8. Troubleshooting Problem Possible cause Solutions A different input method has Select the input method that you been selected. want to display in the "Switching Input". page 31 "Switching Inputs" A resolution not supported Check whether the output by this machine has been resolution of the device is input.
Page 143 When You Cannot Use the Machine As You Want Problem Possible cause Solutions Screen does not The condition that the input For details about the conditions switch method switches under which the input method automatically automatically is not met. switches automatically, see page 31 "Switching Inputs".
Page 144 8. Troubleshooting Problem Possible cause Solutions The color is wrong. The color temperature of Selecting "User" for color this machine is set to "User". temperature in the On-screen Display menu and adjusting the setting value can cause color imbalance depending on the setting.
Page 145 When You Cannot Use the Machine As You Want Problem Possible cause Solutions The screen flickers. This is due to the The screen could appear to specifications of this flicker depending on the machine and is not a defect operating environment and user. or malfunction.
Page 146 8. Troubleshooting Problem Possible cause Solutions Insufficient power is being Check the specifications of the supplied to this machine device and confirm that the from the connected device. output power is 7.5 W or higher. If the output is less than 7.5 W, connect a USB PD charger to this machine.
Page 147 When You Cannot Use the Machine As You Want Problem Possible cause Solutions The screen is switching. Due to the properties of the OLED panel, the screen displays completely dark at the timing when the black screen is displayed. Check the power status of this machine with the power LED.
Page 148 8. Troubleshooting Problem Possible cause Solutions Due to the specifications of wireless video transmission, noise can occur when displaying video with a lot of movement. The image is A high-load process is Reboot the device. delayed (when running on the device. wired connection is used).
Page 149 When You Cannot Use the Machine As You Want Problem Possible cause Solutions There is no battery power Connect this machine to a device remaining. that supports the USB PD standard or to a USB PD charger to charge the battery. Screen does not The condition that the input For details about the conditions...
Page 150 8. Troubleshooting Problem Possible cause Solutions Insufficient power is being Brightness could be limited supplied to this machine depending on the combination of from the USB PD charger the connected device and USB being used. PD charger. Replace with a USB PD charger with an output of 45 W or higher.
Page 151 When You Cannot Use the Machine As You Want Problem Possible cause Solutions The color is wrong The color temperature of Selecting "User" for color (when wireless this machine is set to "User". temperature in the On-screen connection is used). Display menu and adjusting the setting value can cause color imbalance depending on the...
Page 152: Problems Related To Sound
No audio is being input from • Check if the audio output the connected device. destination of the device is set to this machine (RICOH Monitor). • Check the volume setting of the device or the volume setting of the application being used.
Page 153 150BW model Problem Possible cause Solutions No audio is being input from • Check if the audio output the connected device. destination of the device is set to this machine (RICOH Monitor).
Page 154 • Check if the audio output (when wireless the connected device. destination of the device is set to connection is this machine (RICOH Monitor). used) • Check the volume setting of the device or the volume setting of the application being used.
Page 155 Check the network status and (when wireless is poor. reconnect. connection is Audio cannot be played used) when using RICOH Monitor Mirroring for macOS or RICOH Monitor Multicast for Windows. Low volume The volume setting of the Adjust the volume setting of the device or the volume setting of the connected device is low.
Page 156: Problems Related To Wireless Connection
Connecting an external speaker to the device without using the speaker of this machine could cause the audio to shift. Problems Related to Wireless Connection 150 model Problem Possible cause Solutions Unable to change to This model does not support...
Page 157 When You Cannot Use the Machine As You Want 150 BW model Problem Possible cause Solutions Unable to change to It is connected to a power Connect this machine to a USB wireless connection source with an output of less...
Page 158 8. Troubleshooting Problem Possible cause Solutions • Cannot The device you are trying to Use a device that supports connect connect does not support Miracast. wirelessly to a Miracast. Supported OS, a separately device provided manual • Cannot A high-load process is Finish the process on the device connect running on the device.
Page 159 When You Cannot Use the Machine As You Want Problem Possible cause Solutions • Check that there are no devices in the surroundings that generate radio waves that could interrupt wireless communication, and then try the wireless connection again. The desired The network is configured After confirming the SSID, touch network does not...
Page 160 8. Troubleshooting Problem Possible cause Solutions • Check that there are no devices in the surroundings that generate radio waves that could interrupt wireless communication, and then try the wireless connection again. Environment-dependent Change the SSID to one that characters are used in the does not contain environment- network SSID.
Page 161: Problems Related To Ricoh Monitor Mirroring For Macos/Ricoh Monitor Mirroring For Ios
Reconnect to the device with the deleted a device "Register to cxn list" turned ON. from the page 101 "Connection List" Connection list Problems Related to RICOH Monitor Mirroring for macOS/RICOH Monitor Mirroring for iOS 150 BW model Problem Possible cause Solutions...
Page 162: Problems Related To Ricoh Monitor Multicast For Windows
8. Troubleshooting Problems Related to RICOH Monitor Multicast for Windows 150 BW model Problem Possible cause Solutions Video image not shared An error has occurred in Restart the application and the application. reconnect. Touch operation is not An error has occurred in...
Page 163 Uncheck the "Block all incoming connections, including apps in the list of allowed apps". Unable to connect RICOH Monitor 150BW • When using Windows 10 this machine to a Firmware Updater is not Go to "Windows Settings", computer allowed to communicate "Update and Security",...
Page 164 A problem with USB Type-C Replace the USB Type-C cable, cable. and retry the firmware update. The downloaded update file Download the RICOH Monitor is corrupt. 150BW Firmware Updater again and retry the firmware update. page 101 "Firmware"...
Page 165: Troubles Related To This Machine
Troubles Related to This Machine 150/150BW model This machine gets hot. The area within the dotted line in the following figure might feel hot, but this is due to the specifications of this machine and is not a defect: •...
Page 166 8. Troubleshooting...
Page 167: Appendix
This section describes how to operate the stylus pen (optional), how to care for this machine, contact information, trademarks, etc. Using a Stylus Pen The optional RICOH Monitor Stylus Pen Type 1 (stylus pen) can be used to perform stylus pen operations on this machine. Method of use Once a battery is set in the stylus pen, it can be used immediately with this machine.
Page 168: Maintenance
9. Appendix Maintenance Cleaning the Display • When the surface of the display on this machine becomes soiled, wipe it clean with a soft, dry cloth. If the display is used while soiled, the position touched on the display might not be recognized correctly. •...
Page 169: Specifications
Specifications Specifications Machine Specifications Item Specifications Display panel Display method OLED (Organic Light Emitting Diode) Panel size 15.6 inches Maximum resolution 1920 1080 Brightness (max) 300 nit (=cd/m Contrast 1:100,000 Display colors 8bit+2bit FRC Maximum number of Approx. 1.07 billion colors colors Refresh rate 60 Hz...
Page 170 Output (pass-through Max. 25 W charging) (5 V/0.9 A, 9 V/0.77 A, 15 V/1.66 A, 20 V/1.25 A) ON mode power 150 model consumption 13 W or less 150BW model 15.5 W or less Standby mode power 0.2 W or less...
Page 171 • Cable clamps • Sleeve case • Warranty card • Read This First • Quick Guide • License Code for "RICOH Monitor Multicast for Windows" (150BW Model Only) • EU ErP Lot5 label (UK/EU) • Instructions to Dealers • Warranty Flyer for EU/NA •...
Page 172: Optional Specifications
9. Appendix Optional Specifications RICOH Monitor Stylus Pen Type1 Item Specifications Detection AES2.0 method Other • AAAA dry cell battery specifications • Up to 4,096 levels of pressure detection • Function button (For wired connection, depends on OS/application support)
Page 173: Trademarks
Trademarks Trademarks Android is a trademark or a registered trademark of Google LLC. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Apple is a trademark of Apple Inc., registered in the United States and other countries. Mac is a trademark or registered trademark of Apple Inc., in the United States and other countries.
Page 174 MEMO Y3177508B-EN...

This manual is also suitable for:

150bw

Ricoh 150 Operating Instructions Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Ricoh 150

Summary of Contents for Ricoh 150

This manual is also suitable for:

Table of Contents