Above All MIKI MIBD32H-10301-III-BK Instruction Manual

SAFETY INSTRUCTION
READ CAREFULLY BEFORE INSTALLING FIXTURE. PLEASE KEEP THIS MANUAL FOR FUTURE USE.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper
grounding is required for safety.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
MAKE CERTAIN POWER IS OFF BEFORE INSTALLING OR MAINTAINING FIXTURE.
CHECK THAT VOLTAGE IS COMPATIBLE WITH FIXTURE DRIVER. USE APPROVED CONNECTORS FOR
ALL ELECTRICAL CONNECTIONS.
MAINTENANCE CAUTION
2. For lighting controls, follow control instructions carefully.
4. Maintenance must be done by professionals.
WIRE CONNECTION
Universal Voltage permits operation at 120VAC thru 277VAC, 50 or 60 Hz.
GROUND
(GREEN)
FIXTURE
ACN(WHITE)
ACL(BLACK)
INSTALLATION
ACCESSORY PACK
WIRE NUT x 3
Add: 1135 Thomas Busch Highway,Pennsauken, NJ 08110 Phone: 866-222-8866 E-mail: info@abovealllighting.com
Web: www.AboveAllLighting.com ©2016 ABOVE ALL Lighting, Inc. All rights reserved
GROUND
Make the following Electrical Connection:
a). Connect the voltage supply line to ACL in Black.
NEUTRAL
b). Connect the voltage supply Neutral to ACN in White.
c). Connect Green ground lead to the supply ground lead.
LINE
ANCHOR BOLTS x 1
MIKI LED BOLLARD
Instructions Manual
.
L-TYPE WRENCH x 1
1