Related Manuals for RIEGLER P B-228 e
Summary of Contents for RIEGLER P B-228 e
- Page 1 Operating Manual P B-228_e Hand-held digital tyre gauge RIEGLER & Co. KG, Sales Engineering Edition 07/2024 Page 1 of 7 Schützenstraße 27 | 72574 Bad Urach Phone +49 7125 9497-642 technik@riegler.de Subject technical changes.
- Page 2 Operating Manual P B-228_e Hand-held digital tyre gauge Operation and Maintenance Instructions Handheld tyre gauge For your own safety, please carefully read these instructions before the installation, use and maintenance of the hand-held tyre gauge. These operating instructions must be kept for future reference. General information These operating instructions are an integral part of the product, which is attached to it, and must be kept for future refer- ence.
- Page 3 Automatic switch-off after 15 seconds Precision 1.6% Plug version Quick connector Lever plug Garage plug RIEGLER & Co. KG, Sales Engineering Edition 07/2024 Page 3 of 7 Schützenstraße 27 | 72574 Bad Urach Phone +49 7125 9497-642 technik@riegler.de Subject technical changes.
- Page 4 Operating Manual P B-228_e Hand-held digital tyre gauge Digital hand-held tyre gauge with quick connector, hose pivots Product no. Type no. 116963 39.023D Digital hand-held lever plug gauge with lever plug, hose pivots Product no. Type no. 116964 39.033D Digital hand-held lever plug gauge with lever plug, hose pivots Product no.
- Page 5 Carefully check the pressure value specified by the manufacturer and/or vehicle manufacturer based on which the tyres are inflated. Incorrect tyre pressure can result in bursting of the tyres. RIEGLER & Co. KG, Sales Engineering Edition 07/2024 Page 5 of 7 Schützenstraße 27 | 72574 Bad Urach...
- Page 6 Operating Manual P B-228_e Hand-held digital tyre gauge Pressure Plug in the plug attached to the end of the inflating hose to the tyre valve. By pressing the “ON but- monitoring ton” the pressure in the inside of the tyre can be read on the digital pressure gauge. If the tyre pressure is lower than the one prescribed by the vehicle manufacturer: ...
- Page 7 The device must not be disposed of in household waste. To scrap the hand-held tyre gauge it must be made inoperable. RIEGLER & Co. KG, Sales Engineering Edition 07/2024 Page 7 of 7 Schützenstraße 27 | 72574 Bad Urach Phone +49 7125 9497-642 technik@riegler.de...
Need help?
Do you have a question about the P B-228 e and is the answer not in the manual?
Questions and answers