Table of Contents
Advertisement
Quick Links
Operator's Manual
Industry Standard
CheckStar Rotary Torque Transucer
Manual 450 Version 1.1
Crane Electronics Ltd
Notice
ALL RIGHTS RESERVED. Reproduction of any part of this manual in any form whatsoever,
without the prior permission in writing from Crane Electronics Ltd is forbidden.
Copyright © July 2024 by Crane Electronics Ltd.
Advertisement
Table of Contents
Summary of Contents for Crane Electronics CheckStar
- Page 1 Manual 450 Version 1.1 Crane Electronics Ltd Notice ALL RIGHTS RESERVED. Reproduction of any part of this manual in any form whatsoever, without the prior permission in writing from Crane Electronics Ltd is forbidden. Copyright © July 2024 by Crane Electronics Ltd.
-
Page 2: Table Of Contents
Table of Contents ADDRESS ............................. 3 UKCA MARKING ..........................3 CE MARKING ............................3 COMPLIANCE ............................3 WARNINGS AND SAFETY INFORMATION .................... 4 PRODUCT DISPOSAL ..........................5 ABOUT THIS MANUAL ......................... 5 OVERVIEW ............................5 PACKING LIST ............................6 CARE AND STORAGE ........................... 6 WEIGHTS AND DIMENSIONS ....................... -
Page 3: Address
Sales: sales@crane-electronics.com UKCA MARKING Crane Electronics Limited declares that the IS CheckStar has been assessed and complies with the UK regulatory requirements. CE MARKING Crane Electronics Limited declares that the IS CheckStar has been assessed and complies with the requirements of the relevant CE Directives. -
Page 4: Warnings And Safety Information
This unit contains no user serviceable parts. Only qualified Crane service personnel should replace or • fit parts. Changes or modifications to the CheckStar not expressly approved by Crane Electronics Ltd could void • the user’s authority to operate the equipment. -
Page 5: Product Disposal
To enable this product to be disposed of properly i.e., cradle to grave, Crane Electronics is willing to accept the return of your product (at your cost) for recycling or alternatively, for more detailed information about recycling of this product please contact your local authority or the Distributor / Company where you have purchased the product. -
Page 6: Packing List
The CheckStar rotary is designed to measure the torque output of any non-impact assembly tool. The unique construction (patent applied for) gives long brush life with minimal maintenance requirements. An alternative version is available with an angle measurement encoder which allows, with a suitable readout unit, the measurement of the angle of rotation in addition to torque. -
Page 7: Specifications
Dimensions in Millimteres Weight Drive (Grams) ¼" Hex 115.8 30.0 68.0 39.2 56.0 20.6 25.5 13.2 54.5 ¼" Sq 71.5 30.0 68.0 10.3 56.0 13.2 54.5 " Sq 77.0 30.0 72.1 12.9 56.0 10.5 15.0 58.6 ½" Sq 87.0 42.0 83.0 17.0 58.0... -
Page 8: Operation
The CheckStar should be returned to the supplier or manufacturer for recalibration and certification every 12 months. OPERATION Select a suitable size of CheckStar appropriate to the maximum torque rating of the tool used. This should be Return to Contents... -
Page 9: Standard Interface
CheckStar. The CheckStar rotary with angle encoder may also be used with any tool except impact types. Angle measurements may be made with impulse tools but restriction on the maximum acceptance speed of the readout may limit accuracy. - Page 10 Illinois 61264 +1 309-787-1263 salesusa@crane-electronics.com supportusa@crane-electronics.com serviceusa@crane-electronics.com www.crane-electronics.com Crane Electronics Ltd - if you are based in the UK, Europe, Asia, Africa, or Middle East Watling Drive Sketchley Meadows Hinckley LE10 3EY United Kingdom +44 (0)1455 25 14 88 sales@crane-electronics.com support@crane-electronics.com...
Need help?
Do you have a question about the CheckStar and is the answer not in the manual?
Questions and answers