General Information • Note: All tubs need to be leveled in its final resting position and have all feet touching the ground. • It is advised to have tub onsite before preparing drain location. • Note: Unit comes with a 1500-watt inline heater. The heater comes on automatically when the water pump is engaged.
Tub Installation Water Manifold Controls: One cold water supply pipe, one hot water supply pipe. Drainage: The diameter of the drain should be (greater than or equal to) 40mm. This drainage can be at a distance of 300-400mm from the location we show on the chart. 1.
Visit homewardbath.com/support Warranty Information & Registration: A full description of the warranty is available on the Homeward Bath website. To Register, visit homewardbath.com/warranty-registration Note: Registration must be completed within 45 days of receipt to be valid. Customer Reviews: Customer satisfaction is very important to us.
Need help?
Do you have a question about the Lexi Tub MG017 and is the answer not in the manual?
Questions and answers