1. Manuals
  2. Brands
  3. GESSMANN Manuals
  4. Controller
  5. V85
  6. User manual

GESSMANN V85 User Manual

Profinet/profisafe
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Document information:
Status:
released
Revision:
1.2
Involved persons:
Editor:
Jakob Gegeniger
Reviewer:
Frank Eggensperger
Released by:
Jakob Gegeniger
P664_00_3094_User_Manual_PN.docm
FB-E-047 (Stand: 19.06.2019 / Rev 1.0)
User_Manual
P664 - PROFINET/PROFIsafe V85
W. Gessmann GmbH
22.04.21
23.04.21 Rev 1.2
27.04.21 Rev 1.2
(22.04.21 / Rev 1.2 )
Status:
released
page 1 of 14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V85 and is the answer not in the manual?

Questions and answers

Summary of Contents for GESSMANN V85

  • Page 1 Status: released User_Manual P664 - PROFINET/PROFIsafe V85 W. Gessmann GmbH Document information: Status: released Revision: Involved persons: Editor: Jakob Gegeniger 22.04.21 Reviewer: Frank Eggensperger 23.04.21 Rev 1.2 Released by: Jakob Gegeniger 27.04.21 Rev 1.2 P664_00_3094_User_Manual_PN.docm (22.04.21 / Rev 1.2 ) page 1 of 14 FB-E-047 (Stand: 19.06.2019 / Rev 1.0)

  • Page 2: Revision History

    User_Manual P664 - PROFINET/PROFIsafe V85 Directories Status: released Revision history Date Editor Change 26.06.19 Frank Eggensperger Created 02.01.20 Jakob Gegeniger Output current for digital outputs corrected 22.04.21 Jakob Gegeniger Removing of the 24-hour-operation-warning (§4.6) P664_00_3094_User_Manual_PN.docm (22.04.21 / Rev 1.2) page 2 of 14...
  • Page 3 User_Manual P664 - PROFINET/PROFIsafe V85 Directories Status: released Table of contents Introduktion Further documents Hardware Setup of the PLC project GSDML File ..............................8 Device module ............................8 PROFINET device ............................9 PROFIsafe device ............................10 Modules ..............................11 User data ..............................11 Commissioning P664_00_3094_User_Manual_PN.docm...

  • Page 4: Table Of Contents

    Figure 5:Left side: Presentation of the PROFIsafe device in PLC project, right side: part of the module catalogue . 10 Figure 6: data structure example for PROFIsafe-module ..................12 Figure 7: Status LEDs at the V85 device ........................14 List of tables Table 1: Technical Values .............................
  • Page 5 To ensure the security of the system, the configuration options for customers and the internal configuration options are treated differently. The devices can be operated as PROFINET and as PROFIsafe device. But only the manufacturer W. Gessmann can define the PROFINET or PROFIsafe operation of each module.

  • Page 6: Further Documents

    Status: released 2 Further documents For the configuration and commissioning of a specific PROFINET / PROFIsafe V85 device, the following documents which are supplied with the device must be followed: 1. Wiring diagram The individual device is described by the wiring diagram. References to further documents may be given here.

  • Page 7: Table 1: Technical Values

    User_Manual P664 - PROFINET/PROFIsafe V85 3 Hardware Status: released 3 Hardware The following table gives the technical values of the device. The information on the wiring diagram may differ and applies overrulingly. Table 1: Technical Values Characteristics Value Note Power supply +12 V …...

  • Page 8: Gsdml File

    User_Manual P664 - PROFINET/PROFIsafe V85 4 Setup of the PLC project Status: released 4 Setup of the PLC project During the setup and integrating of the devices into the existing system, a number of essential points must be taken into consideration, which are explained in the following sections.

  • Page 9: Figure 3: Data Structure

    User_Manual P664 - PROFINET/PROFIsafe V85 4 Setup of the PLC project Status: released Figure 3: Data structure 4.3 PROFINET device The modules in the project configuration must be set according to the device documentation (see section above). The modules are summarized in the configuration system under the heading "PN-IO".

  • Page 10: Figure 5:Left Side: Presentation Of The Profisafe Device In Plc Project, Right Side: Part Of The Module Catalogue

    PROFIsafe modules according to 2.6.1 are omitted so that older systems can accept them as well. For setting the F-destination or F-source address of the PROFIsafe device, the software "PN-Device-Configurator" of W. Gessmann GmbH must be used. The program is available for download at the following link. URL: http://dl.gessmann.com/gessmann_400...

  • Page 11: Table 2: Module Types

    P664 - PROFINET/PROFIsafe V85 4 Setup of the PLC project Status: released 4.5 Modules There are four different module types, which can be used on the V85 device. These are shown in the following table. Table 2: module types Module meaning...

  • Page 12: Figure 6: Data Structure Example For Profisafe-Module

    User_Manual P664 - PROFINET/PROFIsafe V85 4 Setup of the PLC project Status: released The assignment of the analogue signals and digital signals and the error information depends on the frame specified in the GSDML file (order, maximum of bit width, total length). The concrete assignment is defined in the wiring diagram.

  • Page 13: Table 4: Description Of The Status Led

    5 Commissioning During commissioning of the V85 PROFINET / PROFIsafe device, there are no special features compared to other PROFINET devices. However, a brief check of the status LEDs is recommended. The following table explain the status LEDs. These LEDs can be used to determine the device status.

  • Page 14: Figure 7: Status Leds At The V85 Device

    User_Manual P664 - PROFINET/PROFIsafe V85 5 Commissioning Status: released Figure 7: Status LEDs at the V85 device P664_00_3094_User_Manual_PN.docm (22.04.21 / Rev 1.2) page 14 of 14 FB-E-047 (Stand: 19.06.2019 / Rev 1.0)

Table of Contents