Related Manuals for Duren Tools 321289
Summary of Contents for Duren Tools 321289
- Page 1 Product Code: 321289 CORDLESS 2 SPEED 75MM POLISHER Product Instruction Manual fastmovertoolsuk.com...
-
Page 2: Technical Data
321289 Instruction Manual WARNING! Please read through this manual carefully before using the 321289. This tool must only be used for polishing and within the parameters outlined in this manual. All users of the equipment should be trained in any risks associated with the products they are polishing or using as finishing aids. - Page 3 PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE USAGE DIAGRAMS Düren Tools 1 French's Avenue Dunstable, Bedfordshire, LU6 1BH, UK. fastmovertoolsuk.com 01582 661993 sales@fastmovertoolsuk.com...
-
Page 4: Safety Instructions
321289 Instruction Manual PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE SAFETY INSTRUCTIONS These instructions are intended as a guide to the correct use of this equipment. The process or materials being polished may have risk characteristics requiring additional safety measures and these must be identified by the user. All users of this polisher must be thoroughly acquainted with this manual. -
Page 5: General Safety Instructions
SAFETY INSTRUCTIONS 15. When the ASTA/BS approved UK 3 pin plug is damaged, cut the cable close to the plug and dispose of the it safely. Fit a new plug according to the following instructions; 1: Connect the BROWN live wire to the live terminal ‘L’. 2: Connect the BLUE neutral wire to the neutral terminal ‘N’. -
Page 6: Before Use
321289 Instruction Manual BEFORE USE The charger becomes warm and may buzz slightly during charging. This is normal and does not indicate WARNING! Do not use the polishing machine in a fault. potentially explosive atmospheres. Use the polishing machine only in ambient temperatures between •... -
Page 7: Work Instructions
PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE • Mount the required polishing attachment 10 on the polishing / sanding plate. Switching On / Off • Make sure that the selected polishing attachment is not (Fig. E) contaminated and always mounted exactly in the centre NOTE! The polishing machine is locked if the shift lock x is on the polishing / sanding plate. - Page 8 321289 Instruction Manual MAINTENANCE, CLEANING, Transport STORAGE AND TRANSPORT • Remove the attachment before transport (see chapter Cleaning "Mounting the sanding or polishing attachment"). • Remove the battery before transporting the drill (see CAUTION! When charging and during high loads on the chapter "Inserting / removing the battery").
-
Page 9: Troubleshooting
PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE TROUBLESHOOTING Problem Possible cause Rectification Polishing machine does not start. Battery empty. Charge the battery. Problem with battery contacts. Slide the battery into the guide on the polishing machine handle. The battery has to click into place audibly. -
Page 10: Declaration Of Conformity
Part Code: 321289 Distributed in the EU by Duren Tools, a wholly owned subsidiary of Fast Mover Tools Ltd Address Unit 1 Frenchs Avenue, Dunstable, Bedfordshire, LU6a1BH, United Kingdom The following Transposed Harmonised Standards have been applied in the design and construction of this equipment:... - Page 11 PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE...
-
Page 12: Spare Part List
321289 Instruction Manual SPARE PART LIST Part Name Part Name Motor Bear 6902 Gear for motor Screw ST2.9X14 Motor bracket Polisher pad Screw Mx*8 Sponge attachment Gear box Speed switch 1st washer Circlip for toggle 1st Ring gear Circlip for speed... - Page 13 NOTES...
- Page 14 321289 Instruction Manual NOTES...
-
Page 16: Weee Regulations
Contact your local solid waste authority for recycling information. Düren Tools 1 French's Avenue Dunstable, Bedfordshire, LU6 1BH, UK. 01582 661993 sales@fastmovertoolsuk.com www.fastmovertoolsuk.com Copyright © 2024. Duren Tools. No part of this manual may be copied or altered without the permission of the owners of the Duren brand.
Need help?
Do you have a question about the 321289 and is the answer not in the manual?
Questions and answers