Table of Contents
Advertisement
Model • Modèle• Modelo
DKC445BL
For service, contact your nearest
service depot or call:
1-800-26-
Danby
(1-800-263-2629)
to recommend a depot in
your area.
En cas de réparation, veuillez
contacter votre service
après-vente le plus près ou
communiquez au:
1-800-26-
Danby
(1-800-263-2629)
pour connaître le service
après-vente le plus proche.
Para obtener servicio,
comuníquese con el
establecimiento de servicio
más cercano o llame al:
1-800-26-
Danby
(1-800-263-2629)
para que le recomendemos un
establecimiento de su zona..
Printed in China (P.R.C.)
The model number can be found on the serial plate located on the
back panel of the unit.
All repair parts available for purchase or special order when you
visit your nearest service depot. To request service and/or the
location of the service depot nearest you, call the TOLL FREE
NUMBER.
When requesting service or ordering parts, always provide the
following information:
• Product Type
• Model Number
• Part Description
Glacière de bière en fût
Le numéro du modèle se trouve sur la plaque d'identification située
sur le panneau arrière de l'appareil.
Il est possible d'acheter les pièces de rechange ou de les obtenir par
commande spéciale en vous rendant à votre service après-vente le
plus proche. Pour effectuer des réparations ou obtenir l'adresse du
service après-vente le plus proche, veuillez composer le NUMÉRO
SANS FRAIS.
Pour effectuer des réparations ou commander des pièces de
rechange, veuillez donner les renseignements suivants :
• Type de modèle
• Numéro du modèle
• Description des pièces
Barril refrigerador
El número de modelo se encuentra en la placa de serie, ubicada en
el tablero posterior de la unidad.
Puede comprar todos los repuestos o hacer un pedido especial
visitando el establecimiento de servicio más cercano a su domicilio.
Llame al TELÉFONO GRATUITO para obtener servicio de
mantenimiento o la dirección del establecimiento de servicio más
cercano a su domicilio.
Siempre, al solicitar servicio de mantenimiento o hacer un pedido de
repuestos, debe suministrar la siguiente información:
• Tipo de artefacto
• Número de modelo
• Descripción del repuesto
Danby Products Limited, Guelph, Ontario Canada N1H 6Z9
Danby Products Inc., Findlay, Ohio USA 45840
Keg Cooler
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Danby Millenium Chill'n Tap DKC445BL
Summary of Contents for Danby Millenium Chill'n Tap DKC445BL
- Page 1 Danby (1-800-263-2629) para que le recomendemos un establecimiento de su zona.. Danby Products Limited, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc., Findlay, Ohio USA 45840 Printed in China (P.R.C.) Keg Cooler The model number can be found on the serial plate located on the back panel of the unit.
- Page 2 Danby Products Limited, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc., Findlay, Ohio USA 45840 Keg Cooler Owners Manual Glacière de bière en fût...
-
Page 3: Table Of Contents
Beer is easily available with Danby's new Keg Cooler Refrigerator, however, it is not intended to be available to people under the legal age to consume beer. One of the options Danby offers is a lock so that access to the ice cold beer can be limited. -
Page 4: Before Putting Appliance Into Use
BEFORE PUTTING APPLIANCE INTO USE • Before connecting the appliance to any electrical power supply, leave it standing (upright) for about 2 hours. This will reduce the possibility of malfunctions in the cooling system due to transport handling. • Clean the appliance thoroughly, both interior and exterior. (See Cleaning and Maintenance) •... -
Page 5: Location
A check list of accessories is listed below for reference purposes. In the event any accessory is missing and /or not in good condition, please contact our after sales service department and ask for customer assistance. TO L L FREE NUMBER "1 800 26-DANBY" WARNING... -
Page 6: Chill 'N Tap Keg Cooler Accessories
CHILL'N TAP ACCESSORIES (included with this unit) 1 Chrome Rail (for attachment to Worktop) 4 Self-Tapping Screws (to attach chrome rail) 1 CO2 Cylinder Support Stand 1 CO2 Cylinder (empty) 1 CO2 Regulator (high/low pressure gauges) 1 CO2 Air Line Hose (red) 2 CO2 Air Line Hose Connectors (black) 1 Beer Keg Coupler 1 Beer Tower Unit (complete with faucet, hose and wing nut) -
Page 7: Chill'n Tap Assembly Instructions
CHILL'N TAP ASSEMBLY INSTRUCTIONS: 1. Remove Worktop: Using a Phillips Screwdriver, remove the three screws located on the front underside edge of the worktop and the three screws located at the rear (back) side of the worktop. See Fig's. 1 & 2 Remove the worktop from the cabinet and position the worktop on top of the cabinet so that the front corners are staggered across the front corners of the cabinet. - Page 8 CHILL'N TAP ASSEMBLY INSTRUCTIONS CON’T 8. Installation of CO2 Air Line inside Cabinet: Remove rubber plug located at the exterior (top right hand corner) of the cabinet. (store this plug in a safe place, it will be required when converting your unit back to a basic refrigerator) Insert the open end of the air line into the cabinet through the opening vacated by plug.
- Page 9 CHILL'N TAP ASSEMBLY INSTRUCTIONS CON’T 1 6 . Installation of the Keg Coupler: IMPORTA N T N O T I C E ; Make sure the black pull handle of the keg coupler is in the "upward" (closed) position before installing on the beer keg. See Fig. 9 Insert the keg coupler into the locking neck of the beer keg and apply a 1/4 turn clockwise to lock into p o s i t i o n .
-
Page 10: How To Replace Empty Co2 Cylinder
HOW TO REPLACE AN EMPTY CO2 CYLINDER 1. Close the main cylinder valve (A) by turning in a clockwise direction. See Fig.13 2. Close the secondary shut-off valve (C) by turning to "horizontal" (east/west) position on lower stem pipe. See Fig.13 3. -
Page 11: Helpful Hints On Setting The Refrigerator Temperature
HELPFUL HINTS ON CONTROLLING TEMPERATURE Keep a thermometer handy. (adjust temperature control knob accordingly) Periodically monitor temperatures inside your cooler. (adjust as necessary) Keep the refrigerator door closed as much as possible to avoid temperature fluctuations AUTOMATIC DEFROSTING: There is no need to defrost the refrigerator, because ice depositing on the evaporator is defrosted automat- ically. -
Page 12: Helpful Hints To Assist You In Serving The Perfect Glass Of Cold Beer
HELPFUL HINTS TO ASSIST YOU IN SERVING THE PERFECT GLASS OF COLD BEER STORAGE AND HANDLING: • Draught Beer should be treated as a food product. In most instances draught beer is not pasteurized. It is very important that you store and handle it properly. •... -
Page 13: Keg Sizes
Beer is easily available with Danby's new Keg Cooler Refrigerator, however, it is not intended to be avail- able to people under the legal age to consume beer. One of the options Danby offers is a lock so that access to the ice cold beer can be limited. Danby does not assume liability for the unlawful use or con- sumption of the beer. -
Page 14: Converting The Chill 'N Tap Keg Cooler To A Basic "All Refrigerator
Additional Wire Cantilever Shelf For more details on purchasing any of the above listed accessories, please contact our after sales service department at 1-800-26-DANBY (1-800-263-2629). Afully charged (5lb).CO2 cylinder will service (approx.): Q u a n t i t y. -
Page 15: Warranty
The following clause refers to single and double door refrigerators, supplied with or without a separate freezer section. Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.
Need help?
Do you have a question about the Millenium Chill'n Tap DKC445BL and is the answer not in the manual?
Questions and answers