Page 1
ㅤ ㅤ Roxel VRP-120 Instruction manual VINTAGE TURNTABLE 33 – 45 RPM EXTERNAL SPEAKERS, WIRELESS AUDIO PLAYBACK AND RECORDING FROM USB For safe use and maximum performance, please read this manual carefully before use.
ㅤ ㅤ SAFETY WARNINGS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISASSEMBLE THE APPLIANCE. THERE ARE NO USER SERVICEABLE PARTS. FOR REPAIRS, CONTACT QUALIFIED TECHNICAL PERSONNEL. To prevent electric shock or fire hazard, do not expose to rain or moisture. This symbol warns that before using the unit it is necessary to read the instruction manual carefully.
Select the Wireless Audio (BT) source with the appropriate knob and turn on the product, a ⚫ sound will be emitted to confirm the activation of the Wireless Audio function. Start the relevant function on the external device and search for the name “Roxel VRP-120” ⚫ (enter 0000 if required).
Page 6
ㅤ ㅤ resume playback, press the Play/Pause button again. NOTE: In Wireless Audio mode, if no audio signal is received for 15 minutes, it will ⚫ automatically enter Standby mode. In this mode the red light flashes slowly, press the POWER knob to exit Standby mode.
ㅤ ㅤ REPLACING THE STYLUS Take off the stylus To remove the stylus, hold the tone arm and the plastic stylus holder and gently pull the white stylus holder towards you, away from the cartridge. Repeat the procedure in reverse to insert the pin.
@2019 Roxel, All rights reserved by Roxel Limited Registered in the United Kingdom The Logo “Roxel” is a trademark of Roxel Limited. Imported and Distributed by Roxel Limited. Unit 11a, Lakes Industrial Estate, Lower Chapel Hill, Braintree, Essex CM7 3RU...
Need help?
Do you have a question about the VRP-120 and is the answer not in the manual?
Questions and answers