Advertisement
Advertisement
Table of Contents
Summary of Contents for Streetwize DMDED1
- Page 1 DMDED1 DMD Collective Hang-n-Dry Electric Clothes Dryer Information for use...
- Page 2 Thank you for purchasing this Hang-n-Dry Electric Dryer from DMD Collective. This electric dryer is designed to dry up to 15kg of washed laundry that has been spun dry. It is suitable for use in homes, student accommodations, caravans, motorhomes, high rise flats, balconies and more.
-
Page 3: Product Elements
Product Elements 1. Folding plastic bars A - Top x 2 2. Folding plastic bars B - Middle x 2 3. Folding plastic bars C - Bottom x 2... -
Page 4: Health And Safety
Health & Safety When using the clothes dryer, basic safety precautions should always be followed including the following: • This appliance is intended for household use only. Do not use the electric dryer in any other way other than its intended use. •... - Page 5 Assembly Instructions 1. Get the two bottom folding plastic bars (C) and attach the castor wheels as shown in Figure 1. Please ensure the arrows on the bars are pointing upwards. 2. Get two of the stainless steel tubes and connect both the bottom folding plastic bars as shown in Figure 2.
- Page 6 5. Get the assembled MIDDLE module. Place it on the floor with the arrows pointed upwards. Then, attach 6 stainless steel tubes as shown in Figure 5. 6. Then attach the TOP module to the 6 stainless steel tubes that you have just attached to the MIDDLE module (Figure 6).
- Page 7 10. Then attach the BOTTOM module to the stainless steel tubes as shown in Figure 11. 11. Once you have attached the BOTTOM module, turn the frame back upright so that the wheels are on the floor (see Figure 12). 12.
- Page 8 Operating Instructions 1. First, ensure you have positioned the frame near a mains socket plug. 2. Connect the electric dryer unit to the mains power socket and switch on. 3. Turn on the unit by switching the dial to either the ON position or to one of the preset timer settings.
- Page 9 Folding The Frame After Use To fold the frame after use, please ensure the frame and electric dryer unit has fully cooled down. Once cooled down, please follow the instructions below: 1. Pull up the bottom of the fabric to remove the electric dryer unit and steel hanger (Figure 17).
-
Page 10: Troubleshooting
Troubleshooting Troubleshoot Potential Reason Electric dryer unit not working 1. Please ensure proper connectivity to mains socket. 2. Blown fuse. 3. Power outage. Clothes take a long time to dry 1. The clothes in the dryer are too thick. (more than 180 minutes) 2. -
Page 11: Technical Specifications
Technical Specifications Product name Hang-n-Dry Electric Clothes Dryer Product code DMDED1 Sound Decibel Rating 57dB Material (Factory Only • Heater (1pc) • Clothes cover (1pc) • Stainless steel tube (20pcs) • Folding Plastic Bar (6pcs) • Castor (4pcs) • Steel Hanger (1pc) •... - Page 12 Streetwize, Ashburton Road West, Trafford Park, Manchester, M17 1RY For Product Support: E: support@streetwize.co.uk T: +44 (0)161 447 8597 EU Regd. Address: Ace Supply Co (Europe) Ltd. D02 A098, ROI www.streetwize.co.uk...
Need help?
Do you have a question about the DMDED1 and is the answer not in the manual?
Questions and answers