Connecting The Ethernet Cable; Attaching The Power Supply; Security - TRENDnet TV-IP100W User Manual

Connecting the Ethernet cable

Connect an Ethernet cable to
the network cable connector
located on the Wireless Internet
Camera's rear panel, and then
attach it to the network.

Attaching the Power Supply

Attach the external power
supply to the DC power input
connector located on Wireless
Internet Camera's rear panel,
and then connect it to your local
power supply.
TIP: You can confirm power source is supplied from the LED
indicators label Power on the Wireless Internet Camera is
illuminated.
14
To ensure the highest security and prevent unauthorized usage of
the Wireless Internet Camera the Administrator has the exclusive
privilege to access the System Administration for settings and
control requirements to allow users the level of entry and
authorize the privileges for all users.
Camera supports multi-level password protection and access to
the Wireless Internet Camera is strictly restricted to define the
user who has a "User Name" and "User Password" that is
assigned by the Administrator.
The administrator can release a public user name and password so
when remote users access the Wireless Internet Camera they will
have the right to view the image transmitted by the Wireless
Internet Camera.
NOTE: Since the default settings are Null String, it is highly
recommended to set the "Admin ID" and "Admin Password"
when you are the first time to use the Wireless Internet
Camera. Once the ID and Password are defined, only the
administrator has the access to management the Wireless
Internet Camera. This procedure should be done as soon as
possible since the security features with the Wireless Internet
Camera will not be enabled until the "Admin ID" and "Admin
Password" is defined.
15
3
S
ECURITY
The Wireless Internet