Summary of Contents for Rugged Radios BRONCO
- Page 1 MOBILE RADIO MOUNT Mounting the mobile radio to the center console passenger grab handle I NSTALL ATIO N I NSTR UCTIO N S MT-RM-BRONCO V1.0 - 07/2024...
- Page 2 • QTY (1) Philips Screw driver • QTY (1) Small adjustable Crescent Wrench • QTY (1) Your Choice of Mobile Rugged Radio • QTY (1) MT-RM BRONCO kit: Step 1 Loosely attach the radio brackets and the provided 4 bolts (see...
- Page 3 Vehicle Installation Step 5 Slide in the long bolts provided into the holes on the angled edge of the mount. The bolt head should be on the same side as the radio: See fig 5 Add the spacers provided to the bolt ends: see fig 6 Step 6 Locate the bolt holes on the side handle of the vehicle and remove the bolts that are installed in on the vehicle.
- Page 4 Performance Check Now it's time to test. It’s always best to check performance in an outdoor open area. Turn on the radio and intercom system. Turn on each device one at a time. Check operation separately to assure each device is functioning properly. Once all devices are on and functioning properly, re-check with the engine running.
Need help?
Do you have a question about the BRONCO and is the answer not in the manual?
Questions and answers