Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Milesight SCT01
- Page 1 Sensor Configuration Tool SCT01 User Guide...
-
Page 2: Safety Precautions
Safety Precautions Milesight will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide. The device must not be disassembled or remodeled in any way. Do not remove the battery of the device. -
Page 3: Table Of Contents
Contents 1. Product Introduction ......................... 4 1.1 Overview ...........................4 1.2 Features ........................... 4 2. Hardware Introduction ........................4 2.1 Packing List ..........................4 2.2 Hardware Overview ......................... 5 2.3 Dimensions (mm) ........................5 3. LED Indicators ........................... 5 4. Operation Guide ..........................6 4.1 Sensor Power On/Off ...................... -
Page 4: Product Introduction
Milesight Sensor Configuration Tool is a portable configuration tool device for NFC configurations of Milesight sensors. As a professional NFC reading and writing tool, SCT01 features a straightforward panel with a large NFC area and clearly stated buttons, making it easy for users without any technical background to operate the configurations smoothly on the spot. -
Page 5: Hardware Overview
2.2 Hardware Overview 2.3 Dimensions (mm) 3. LED Indicators Indication Description Indication Status 3 indicators light up for Power Battery Status Battery Level: >70% 3s after Power On... -
Page 6: Operation Guide
2 indicators light up for Battery Level: 30~70% 3s after Power On 1 indicator lights up for Battery Level: 20~30% 3s after Power On 3 indicators blink for Battery Level: 0~20% every 5s Charging via Type-C port 1 indicator blinks Charge End charging Sensor... - Page 7 Note: 1) When the READING indicator changes from blinks to static on, it means SCT01 is writing the device and please keep both devices still to avoid writing failure.
-
Page 8: Sensor Configuration
4. Select the reading mode of ToolBox App as Bluetooth to scan the devices and select the target device to connect. The default Bluetooth name is SCT01-XXXXXX (5th to 11st of device SN), the default Bluetooth pin code is 521125 and the default device password is 123456. - Page 9 3) Adjust the configuration of sensor and click Save to save it as a template. Method 2: 1) Before connecting to SCT01 device, select the reading mode of ToolBox App as NFC, then attach NFC area of smartphone to target sensor to read the configuration.
- Page 10 3) Switch the reading mode of ToolBox App as Bluetooth, connect the ToolBox App to SCT01 device. 4) Go to Settings page to click Select button to select the new template, then click Add to list.
- Page 11 6. Click Write to save the template files to SCT01 device. Note: 1) The Wi-Fi/BLE indicator will light off if the smartphone does not connect to SCT01 device within 40s. Please press the button twice to make it blinks again.
- Page 12 Note: 1) The SCT01 device will apply the templates to different models automatically. 2) If SCT01 device saves multiple templates of the same model, it will only write the template which is latest saved. 3) When the READING indicator changes from blinks to static on, it means SCT01 is writing the device and please keep both devices still to avoid writing failure.
-
Page 13: Sensor Upgrade
5. Click Write to save the firmware to SCT01 device. Note: 1) The Wi-Fi/BLE indicator will light off if the smartphone does not connect to SCT01 device within 40s. Please press the button twice to make it blinks again. 2) When SCT01 starts writing to sensors, the Bluetooth connection will be terminated. -
Page 14: Maintenance
Write Firmware to Sensors 1. Press UPGRADE button. 2. Click START button and ensure the READING indicator blinks, attach the NFC area of SCT01 device to target sensor to write the firmware. When the SUCCESS or FAILURE indicator lights up and the buzzer beeps, the operation is complete. -
Page 16: Upgrade
2. Go to Maintenance page of ToolBox App, and tap Upgrade to upload firmware and upgrade the device. Note: Operation on ToolBox is not supported during the upgrade. 4.4.3 Reset Go to Maintenance page to tap Reset to reset SCT01 device to factory settings. -
Page 17: Troubleshooting
6. Check if sensor configuration password is default password. If not, enable Sensor Write Cipher of SCT01 device to configure the sensor password. 7. Ensure SCT01 device battery level is over 20%. Otherwise, it may cause the configuration failure. -END-...
Need help?
Do you have a question about the SCT01 and is the answer not in the manual?
Questions and answers