WillowWood LimbLogic Quick Start Manual

LimbLogic® Quick-Start Guide
1. Turn on the Vacuum Pump.
2. Turn on the fob.
3. To enter Standby Mode:
To resume vacuum regulation:
4. Turn off the Vacuum Pump.
All manuals and user guides at all-guides.com
Press one time.
Pump will beep once.
Wait 10 seconds.
Press and hold until digits
flash in "chasing" pattern. Fob
displays current vacuum level.
Pump is Active and will operate
until preselected vacuum level
has been reached.
Press for approximately 2
seconds. Chasing pattern will
be displayed, then Standby
Indicator will light.
Press for approximately 2
seconds. Chasing pattern
will be displayed as pump
returns to Active State.
Press one time.
Pump will beep either two
or four times.