Do you have a question about the TFD-100 Series and is the answer not in the manual?
Questions and answers
Summary of Contents for Elproma TFD-100 Series
Page 1
Elproma Elektronika Sp. z o.o. Dunska 2A, 05-152 Czosnow, Poland +48 227517680, info@elpromaelectronics.com, http://www.elpromaelectronics.com TFD-100 Time & Frequency Distribution Unit User Manual Firma jest zarejestrowana w: Sąd Rejonowy dla m.st. Warszawy w Warszawie, XIV Wydz. Gospodarczy Krajowego Rejestru Sadowego, KRS NR 0000030839 REGON: 011107169, NIP(#VAT): PL5260208680, Kapitał zakładowy: 68 250,00PLN...
1 Table of Content Table of Content ..........................2 Symbols ............................3 Important Safety Information ......................3 Important Safety Instructions and Protective Measures ............3 Unpacking ..........................4 Instalation ..........................4 Required materials ......................4 3.3.1 Making connections ......................4 3.3.2 Cleaning ..........................
3.1 Important Safety Instructions and Protective Measures ATTENTION! These are the important Safety Instructions that should be followed during installation and maintenance of the ELPROMA family product. IMPORTANT NOTE This equipment contains hazardous AC and DC voltages. Do not handle any metallic part until the power has been disconnected.
2. Check for physical damage. 3. If no physical damage is apparent, then proceed with making appropriate connections. If physical damage is observed, then immediately contact Elproma and the carrier. 4. Save the shipping container for submitting any necessary claims to the carrier.
3.4 C LEANING ATTENTION! Do not wet clean the appliance! Penetrating water can cause considerable dangers to the user (e.g., electric shock). Liquid can destroy the electronics of the device! Liquid penetrates into the housing of the device and can cause a short circuit of the electronics. Only clean with a soft, dry cloth.
4 TFD-100 Distributor Unit The TFD-100 series is a 1U, rack mount, modular time and frequency distributor. It provides the precise distribution of any frequency from 1PPS up to 10MHz include most popular standards: 1PPS (TTL), IRIG-DCLS (TTL), 10MHz (TTL and Sine).
4.4 Power AC power module Connector Type: IEC320 AC inlet Fuse: 2x T 1A H 250 V Input Parameters Nominal Voltage Range: 100-240 VAC Maximum Voltage Range 85-205 VAC Nominal Frequency Range 50-60 Hz Maximum Frequency Range: 47-70 Hz LED indicator: LED Indicator ON –...
Page 8
DC power module Connector Type: WR-TBL Series 3175 Fuse: 600mA (Internal) Input Parameters Nominal Voltage Range: 46-50VDC Maximum Voltage Range 36-72VDC LED Indicator ON – power module is OK OFF – No power or damaged power module Power Supplies Options TFD-101 –...
4.5 TFM-1218 The TFM-1218 module is a 1PPS to 10MHz (TTL) high precision 1/8 distributor module. It provides the precise distribution of any: frequency from 1PPS up to 10MHz ź time code signals IRIG-DCLS (TTL) • frequency from 1PPS up to 10MHz •...
4.6 TFM-1228 The TFM-1228 module is a 10MHz analog sine 1/8 distributor module. It provides the distribution of: § frequency from 1Hz up to 15MHz Sine Signal • frequency from 1Hz up to 15MHz Sine Signal Model TFM-1228 version 2.3 Input -8dBm to 13dBm @50Ω...
4.7 TFM-2010 GPS/GLONAS/Beidou network time server (NTP, PTP). Includes high quality TCXO 10MHz frequency source synchronized to GPS. TFM-2010 is next generation Industry 4.0, time server module. It delivers time directly to network using NTP and IEEE1588 protocols. It is equipped with single 100/10Mbps Ethernet port working with IPv4/IPv6*.
4.8 TFM-2022 The TFM-2022 module is a universal input module with redundancy. It provides two redundant inputs with 3 selection modes and signal type detection. Model TFM-2022 Input -8dBm to 18dBm @50Ω Outputs 8-32 outputs -8dBm to 18dBm @50Ω from 1-4 TFM-1228 modules Frequency 1 up to 15 MHz Input connectors...
Page 13
Console Connector: RJ45 with Cisco compatible pinout Rj45 Pin Signal N.C. N.C. N.C. N.C. RS232 port configuration: Baude rate Parity Data bits Stop bits Handshaking CMD end line 115200 None None We are recommend using Open Source Terminal applications: Terminal by Br@y++ .
Page 14
Console Comands Output TFD SIGNAL OUT MODE SET AUTO Set selection mode to AUTO TFD SIGNAL OUT MODE SET FORCE MAIN Set selection mode to FORCE MAIN TFD SIGNAL OUT MODE SET FORCE AUX Set selection mode to FORCE AUX Get current selection mode (AUTO, FORCE TFD SIGNAL OUT MODE GET MAIN, FORCE AUX)
4.9 TFM-11316 The TFM-11316 module is a RS-422 output splitter. Specification: OUTPUT RS-422 Vhi 3V3 Output connectors 2pin 3.5mm terminal block Rise Fall time ~3.5ns STD dev ~34,500ps 4.10 TFM-1012 The TFM-1012 is a module with two digital inputs for 1PPS and 10MHz. This module has two separate inputs that can be used for separate output cards.
4.11 TFM-1032 The TFM-1032 is a module with two RS-422 inputs. This module has two separate inputs that can be used for separate output cards. It can also be used only one input for all output cards. Specification: INPUT RS-422 Input connectors 3pin 3.5mm terminal block...
Need help?
Do you have a question about the TFD-100 Series and is the answer not in the manual?
Questions and answers