Table of Contents
Summary of Contents for iPettie Donut Frost
- Page 1 User manual Donut Frost 6-Meal Automatic Pet Feeder This guide details the setup and functions of the Donut Frost Pet Feeder. Please follow the steps in this manual while using the device, and keep this manual for future reference.
-
Page 2: Table Of Contents
CONTENTS SAFETY GUIDELINES ························································· 01 WHAT'S IN THE BOX ·························································· 02 ································································ 02 SPECIFICATIONS ························· 03 GETTING TO KNOW YOUR PET FEEDER INSTRUCTIONS FOR USE ·················································· 04 CLEANING AND MAINTENANCE ····································· 07 ························································· 09 TROUBLESHOOTING ··········································· 10 SETTING THE FEEDING TIME... -
Page 3: Safety Guidelines
SAFETY GUIDELINES Device placement 1. Pet feeder should be placed on a level surface. Do not place or store an appliance where it can fall or be pulled. 2. Only for use indoors, away from areas of direct sunlight or moisture. 3. -
Page 4: What's In The Box
WHAT'S IN THE BOX Item Quantity Pet Feeder Ice Pack Type-C Cable User Manual SPECIFICATIONS Material Food-grade ABS、 Polypropylene (pp) Battery Capacity 3,600 mAh Compatible Food All types of pet food Capacity 200 ml x 6 Charge Voltage Type-C 5V 1/2A Rated Power Dimension 320 mm x 327 mm x 87 mm (12.6 in. -
Page 5: Getting To Know Your Pet Feeder
GETTING TO KNOW YOUR PET FEEDER Top Lid Storage Tray Display Panel Hexagonal Bracket Control Board Ice Packs Base Unit Type-C USB Cable Display Panel Lock Indicator Malfunction Indicator Clock Indicator Low Battery/Recharge Indicator Time Meal Indicator Set/Save Decrease Increase... -
Page 6: Instructions For Use
INSTRUCTIONS FOR USE Open the Lid Place the feeder at on a surface, pull the ring lock on the back of the feeder upward with one hand, and lift the entire Top Lid. Insert the Ice Packs Place the Ice Packs horizontally in your refrigerator’s freezer at around -18 °C for at least six (6) hours. - Page 7 INSTRUCTIONS FOR USE Fill the Food Supply ① Place the storage tray into the Base Unit, and then ll the bowl(s) with pet food. ② Cover the Top Lid and lock it. Wet Food Dry Food (85 g per bowl) (85 g–90 g per bowl) * Note: Avoid storing too much fresh food in the device, as the surplus fresh...
- Page 8 INSTRUCTIONS FOR USE Set the Current Time ① Unlock the display, then press the button to set the time. The Clock Indicator will light up and ash. ② Set the Hour System: Press to select either a 24- or 12-hour system.
-
Page 9: Restore Factory Settings
INSTRUCTIONS FOR USE Instant Feed To instantly feed your pet, unlock the display and long press the button. Cancel Feedings If the feeding time is set to 00:00 or 12:00 AM, the feeding will not occur. Restore Factory Settings Unlock the display, then press at the same time for three (3) seconds to clear all settings. - Page 10 CLEANING AND MAINTENANCE Clean the Control Board After removing the control board, wipe the outside with soft damp cloth. * Note: The control board is not waterproof and cannot be washed in water. Reconnect the Control Board ① Align the control board buckle with the bottom housing installation slot and rotate it counterclockwise until hearing a “click”...
-
Page 11: Troubleshooting
TROUBLESHOOTING Error/Symptom Cause How to solve it Charge as soon as possible No power Flip the switch on the Power not turned on Display OFF bottom of the device Contact after-sales support Device abnormal Unable to charge Contact after-sales support Device abnormal Ensure that the control Control board installed... -
Page 12: Setting The Feeding Time
SETTING THE FEEDING TIME EXAMPLE 1 Schedule A Now : 7:00 AM Meal 1 Time : 8:00 AM SETTING 8:00 AM 12:00 PM 6:00 PM DAY 1 DAY 2 Re ll food SETTING THE FEEDING TIME EXAMPLE 2 Schedule B Now : 9:00 AM Meal 1 Time : 8:00 AM SETTING... - Page 13 This device complies with Part 15 of the FCC Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the Donut Frost and is the answer not in the manual?
Questions and answers