Advertisement
Quick Links
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
and Simple Shape technology -Set up and light up your tree in less than 10 minutes! Carefully follow the
instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from bottom to tree top. Start with the section 1 and remove protective cap before
inserting into the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Insert green label plug into the wall outlet.(see Fig. B ), your entire tree should now be lit. If some bulbs
do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Connecting the
plugs or replace the bad bulbs promptly in order to maintain the performance and life expectancy of
your pre-lit tree.
7. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all
wires are free of branch hinges.
8. This tree is constructed with Quick Set® and Simple Shape technology. Shaping is not necessary; you
just need to slightly upsweep all branch tips for a uniform look (see Fig.C) and shift branches to fill any
gaps. Your Christmas tree is now ready to be decorated.
Fig. C
Top view
MODEL #: TG76M3M17C01
Polytree®!
Click
Section 3
Section 2
Side view
This tree assmebles with Quick Set®
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
1.7A 120V 60Hz
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Insert
Green Label
Plug Into Wall
Outlet
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Poly Polytree TG76M3M17C01
- Page 1 TREE ASSEMBLY INSTRUCTIONS Polytree®! Congratulations on purchasing your new tree from This tree assmebles with Quick Set® and Simple Shape technology -Set up and light up your tree in less than 10 minutes! Carefully follow the instructions below on how to quickly and easily set up your new tree. 1.
- Page 2 STORAGE INSTRUCTIONS 1. Unplug extension cord from the wall outlet first and then remove all ornaments and decorations. 2. Disassemble the tree from the top to the bottom. Start with the section 1 and gently lift straight up to remove from section below and fold all branches toward the pole. 3.
Need help?
Do you have a question about the Polytree TG76M3M17C01 and is the answer not in the manual?
Questions and answers