1. Manuals
  2. Brands
  3. XPPen Manuals
  4. Graphics Tablet
  5. Artist Pro 19 Gen 2
  6. User manual

XPPen Artist Pro 19 Gen 2 User Manual

Drawing display
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Artist Pro 19 (Gen 2) Drawing Display
Introduction ................................................................................................................. 3
1. Product Overview ...................................................................................................................... 3
2. Accessories ...................................................................................................................................3
3. Connection ...................................................................................................................................4
3.1 USB-C Connection .............................................................................................................. 4
3.2 3in1 Connection .................................................................................................................. 4
3.3 Android Device Connection ............................................................................................5
4. Wireless Shortcut Remote Connection ..............................................................................5
4.1 Wired Connection ...............................................................................................................5
4.2 the Bluetooth receiver Connection .............................................................................. 6
4.3 Direct Bluetooth connection ...........................................................................................6
5. Compatibility ...............................................................................................................................6
Product Settings ......................................................................................................... 7
1. Driver Download ........................................................................................................................ 7
2. Driver Installation ...................................................................................................................... 7
2.1 Windows .................................................................................................................................7
Content
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Artist Pro 19 Gen 2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for XPPen Artist Pro 19 Gen 2

Summary of Contents for XPPen Artist Pro 19 Gen 2

  • Page 1: Table Of Contents

    Artist Pro 19 (Gen 2) Drawing Display Content Introduction ......................... 3 1. Product Overview ........................3 2. Accessories ...........................3 3. Connection ...........................4 3.1 USB-C Connection ......................4 3.2 3in1 Connection ........................4 3.3 Android Device Connection ....................5 4. Wireless Shortcut Remote Connection ................5 4.1 Wired Connection .......................5 4.2 the Bluetooth receiver Connection ................
  • Page 2 2.2 Mac ............................7 2.3 Linux ............................8 3. Driver Instructions ........................9 3.1 Device connection ......................9 3.2 Device Switching .......................10 3.3 Driver Settings ........................11 4. Driver Uninstallation ......................33 4.1 Windows ..........................33 4.2 MacOS ..........................33 4.3 Linux ............................33 FAQ ..........................

  • Page 3: Introduction

    Introduction 1. Product Overview 1. Indicator Light 1.1 Press the power button to turn it on. The blue light will remain steady. Press the power button again to turn it off. 1.2 Standby mode, steady orange. 1.3 In Drawing Tablet mode, long press the power button for 3 seconds. The blue light and orange light will flash alternately.

  • Page 4: Connection

    Felt Nib for Roller Stylus *2 Nib Extractor *1 -3in1 Cable *1 -USB-C to USB-C Cable *2 -USB-C to USB-A Cable *1 -PD Power Adapter *1 -Wireless Shortcut Remote ACK05 *1 -Drawing Glove*1 -Cleaning Cloth *1 -Pen Nibs Bag *1 Built -in: Standard Nib for Slim Stylus *5 Standard Nib for Roller Stylus *5...

  • Page 5: Android Device Connection

    3.3.1 Connect the drawing display to your Android device directly via the USB-C to USB-C Cable. 3.3.2 Connect the drawing display to the power adapter via another USB-C to USB-C cable. * Please check the XPPen official website for compatible Android phone/tablet models. 4. Wireless Shortcut Remote Connection 4.1 Wired Connection...

  • Page 6: The Bluetooth Receiver Connection

    4.2 the Bluetooth receiver Connection Plug the Bluetooth receiver into the computer and slide the power switch. The indicator light should always be blue. The blue indicator will be off after 30 seconds. 4.3 Direct Bluetooth connection 4.3.1 Slide the power switch and the blue indicator light flashes slowly. Then long press the K11 shortcut key for 6 seconds to enter Bluetooth pairing and the blue indicator light flashes quickly.

  • Page 7: Product Settings

    1.1 Make sure your drawing display is connected correctly to the computer. 1.2 Visit the XPPen website (www.xp-pen.com), click on the Support section and then Download. Choose a product mode and download the latest driver according to your computer system.

  • Page 8: Linux

    If there is no PenTablet_Driver on the list, go to resource Library -> Application Support -> PenDriver to add the driver manually. 2.3 Linux Deb: Enter command “sudo dpkg -i”. Drag the installation file to the window and execute the command;...

  • Page 9: Driver Instructions

    3. Driver Instructions 3.1 Device connection If the device is not connected or the connection fails, you can see the following prompt. In this case, try to restart your computer or the driver, or contact our service staff for support. If the device is connected to your computer successfully, the device name will be displayed in the upper left corner of the driver.

  • Page 10: Device Switching

    3.2 Device Switching You can connect multiple devices via the driver at the same time. Customize a specific device's settings after switching to that device, and all changes made will only apply to that device.

  • Page 11: Driver Settings

    3.3 Driver Settings By clicking the icons on the left, you can switch the driver functions. From top to bottom, they are device settings, pen settings, and driver settings. Clicking the restore default button in the upper right corner will restore the device to default settings.
  • Page 12 You can set the mapping between the display area of the current monitor and the device. If multiple monitors are used in duplicate mode, the work area of the device will be mapped to all monitors. When the pen moves in the work area, the cursor on all monitors will move at the same time.
  • Page 13 Drag to select an area: Drag the cursor from one point to another on the Screen. Click to set screen area: Click the upper left corner position and lower right corner position to select on the monitor. Coordinates: Manually enter coordinates in the corresponding input boxes for X, Y, W and H.
  • Page 14 Set the work area of the device: Full area: The whole work area of the device is available. Customize active area:...
  • Page 15  Drag to select an area: Drag the cursor from one point to another on the device.  Click to set active area: Use stylus to click the upper left corner position and lower right corner position on your device. ...
  • Page 16 Brightness, Contrast: Slide the corresponding slider to adjust the brightness and contrast. Color space: This product has preset three color modes: sRGB, Adobe RGB and P3. Accurate and strict color gamut limits and calibration have been applied to all modes. You can use it directly without the ICC limit again.
  • Page 17 Color temperature: The driver enables five modes, 5000K (low blue light), 6500K (default), 7500K, 9300K, and USER. Low Blue Light: Enable the low blue light mode to prevent eye fatigue make your eyes more comfortable. When the low blue light mode is turned on, the screen may display a yellowish tint, which is a normal occurrence.
  • Page 18 to choose between low blue light protection or other color temperature settings to enable or disable this mode. 3.3.2 Pen settings When the stylus is within the work area, the device will recognize the stylus and add it to the driver. The stylus used should be compatible with the device. a）Pen Switching You can click the pen name drop-down menu on the right and select the corresponding stylus to set.
  • Page 19 Keyboard ： You can set a keyboard shortcut, e.g. "Alt+A" in 3D MAX, so that the alignment tool can be used.
  • Page 20 Multiple groups of shortcut keys can be set. For example, type Ctrl+C, Ctrl+V, and when you press the key, the shortcut key functions set will all run once. Windows (Command): You can add a combination key containing system key, for example: to enter Win (Cmd)+Shift+3, you can press Shift+3 and the driver will bring the system key automatically.
  • Page 21 Set the key combination of mouse and keyboard. With the "Shift" and "Left Click" selected, the shortcut actions can be enabled in application that supports such key combinations. Other-Precision mode: Show driver panel: quickly display the driver settings panel Switch monitor: when there are multiple display devices, you can map the cursor to other display devices.
  • Page 22 Quickly launch the corresponding application through shortcut keys Pen roller settings： Click the roller button on the roller pen on the driver to set the corresponding function and speed of the wheel. c）Pressure...
  • Page 23 By adjusting the pressure curve or selecting preset pressure options. Current pressure: Test the current pressure. Pressure: If closed, you will not feel the pressure when using the stylus. Tilt: If closed, the tilt effect of the pen is turned off. d）Others Mouse mode:...
  • Page 24 When you move your pen out of the work area, the cursor will stay where you leave, which is like operating a mouse. Select the mode and you can adjust the speed of the cursor on your device. If you do not select the mode, the pen mode is default. Windows Ink (for Windows only): Windows supports handwriting function.
  • Page 25 Add an application from the list of applications, tick the application, and then customize pen keys functions. For example, if you select an application and change its configuration, the change is valid only when you use the application. When you switch to another application, the driver will recognize it automatically.
  • Page 26 3.3.4 Settings Import & Export config: You can import/export configurations to read or save settings. This function is only available for the same operating system.
  • Page 27 Shortcut keys: If closed, disable the functions of all keys of the device. Prompt: If closed, when you press a key, no key prompt will be displayed at the bottom of the screen. Diagnostic tool: You can use the diagnostic tool in case of any problems while using the driver. Feedback: If you have any questions or suggestions during the use of the driver, you can give us feedback through this page.
  • Page 28 For settings or usage, see the drawing display settings above. b)Roller The button in the middle of the scroll wheel can be used to switch between the various function groups of the scroll wheel. The driver provides four groups of scroll wheel functions: zoom (default), scroll, brush, and rotate.
  • Page 29 Customize： Click the position of the scroll wheel on the picture, select "Customize" in the preset function drop-down menu, and enter the key or key combination you want to set on the keyboard to customize the clockwise or counterclockwise function of the scroll wheel.
  • Page 30 c)Save/Import Import: Import the configuration stored in the wireless shortcut keyboard to the currently selected application in the driver. Save:...
  • Page 31 Save the configuration of the currently selected application in the driver to the wireless shortcut keyboard. Note: Please use the "Import" and "Save" functions under wired connection. The "Import" and "Save" configurations do not include the rotation function and are only valid under the same system.
  • Page 32 Press K2 of the shortcut remote to check the key group function in use. If you select an unenabled key group in the driver, the key functions in group I will be used by default. Click the close icon in the upper right corner to close the preview window. g）Settings Import &...

  • Page 33: Driver Uninstallation

    Go to Start -> Settings -> Apps -> Apps & Features, find "Pentablet" and then left click "Unload" as per prompts. 4.2 MacOS Go to [Go]-> [Applications], find XPPen and then click "UninstallPenTablet" as per prompts. 4.3 Linux Deb: Enter command “sudo dpkg -r XPPenLinux” and execute the command;...
  • Page 34 1) Check if the drawing software supports pen pressure; 2) Download the latest driver installation files from XPPen website, and check if the pen pressure is normal in the driver; 3) Before installing the driver, turn off your antivirus software and graphics software;...
  • Page 35 please go to the driver---Drawing display---work area---screen, and confirm whether the default screen is selected as the Drawing display (Monitor 2). Line latency during drawing with the software. Check if the computer configuration (CPU&GPU) meets the recommended configuration requirements for the drawing software installed, and optimize related functions via settings according to the FAQs posted on the official website of the drawing software.
  • Page 36 different from the scroll wheel function in the regular interface. Your Windows computer cannot search for the “shortcut Remote”device via Bluetooth.
  • Page 37 Step 1: Please open your computer system settings, select bluetooth & devices---->devices, and open the expansion options. Step 2: Select the “Bluetooth devices discovery” option and change the setting to “Advanced” option. If you need any further assistance, please contact us at:...
  • Page 38 Website : www.xp-pen.com Email: service@xp-pen.com...

Table of Contents