TECHNICAL DATA
HEAVY DUTY
DUAL COMPONENT
MANUAL APPLICATOR GUN
1:1 RATIO, 200/300ML CARTRIDGES
Universal applicator gun for use with 1:1 ratio 300 mL and
200 mL cartridges only. Built-in cartridge stabilizing plate
for extra support. Extra durable, heat-treated piston rod.
Precision sintered friction plate. Easy release star-burst
reverse gripping plate. Zinc alloy handle. 26:1 Thrust Ratio.
APPLICATOR GUN MAINTENANCE
After every use, always clean off any material using the
manufacturer's recommended solvent before it had time to
dry.
To ensure optimum performance, pins in the handle should
be lubricated with oil (WD40 or comparable) after every 10
cartridges.
GENERAL INSTRUCTIONS
1. Press thumb release plate and pull back push rods all
the way out to the "home" position.
2. Release thumb release plate and rods will lock in
their home position.
3. Load the cartridge into the gun. This gun will
accommodate a variety of cartridge styles. Determine
the best fi t at the front of the gun and then align the
push discs to center of the plungers and pull the
trigger to move the discs forward until they are snug
against the plungers.
4. Remove the cap and plugs from the nose piece.
5. Pump the gun until product fl ows equally from both
chambers. This procedure equalizes the pistons to
ensure an equal mix.
6. Install the static mixer on to the nose piece and
tighten. Pump the material through the static mixer.
Discard the fi rst 3 inches, then proceed to application.
NOTICE TO PURCHASER: The following warranty is in lieu of all other expressed or implied warranties, specifi cally all goods are manufactured of fi rst class materials and by competent professionals. We
have no control over the use and application of our products. Our liability shall not exceed the purchase price.
International Epoxies & Sealers | P.O. Box 185 San Antonio, FL 33576 USA | Toll Free: (800) 451-7206
REV: 2/27/2024
Designed for high viscosity products.
Designed for high viscosity products.
Provides extra thrust and power
1:1 ratio cartridges only
Mechanical advantage 26:1
PRODUCT AVAILABLE
96211
Manual Dual Cartridge Gun 1:1
www.useies.com
1/box
tds_96211
Need help?
Do you have a question about the 96211 and is the answer not in the manual?
Questions and answers