Advertisement
Quick Links
GETTING STARTED
Cnvrg comes with a 16-pin to 10-pin ribbon cable, a
pair of screws and a 6-pin ribbon cable for the
expansion connectors.
Before installing it into a case, make sure that both
rails of your power supply have su�cient current
capabilities for your new con�guration (see section
"Speci�cations" below).
Switch o� the power supply before plugging the
module into the case. Plug the 10-pin connector of
the ribbon cable into the power input on the back of
the module, and the 16-pin connector into the power
supply's busboard. Do NOT plug the power connector
CNVRG
into the expansion I/O.
Make sure that you connect both connectors with the
All-in-one stereo output
correct polarity on both sides before switching the
power supply on. The -12V pole is in red on the ribbon
cable.
If you are unsure about any step of this process,
please get in touch with us before doing anything.
We are glad to help!
Happy patching :)
Advertisement
Summary of Contents for HTM HALF-TIME CNVRG
- Page 1 GETTING STARTED Cnvrg comes with a 16-pin to 10-pin ribbon cable, a pair of screws and a 6-pin ribbon cable for the expansion connectors. Before installing it into a case, make sure that both rails of your power supply have su�cient current capabilities for your new con�guration (see section "Speci�cations"...
- Page 2 CNVRG ---------------------------------------------------------- OVERVIEW With four stereo inputs and four stereo outputs, Cnvrg (pronounced "converge") packs everything you need for your �nal stereo mixing stage into a compact 6HP form factor. It was designed with one purpose in mind: to bring submixes together while allowing them to go through an FX chain before being output to the outside world.
-
Page 3: Signal Flow
CNVRG ---------------------------------------------------------- SIGNAL FLOW All inputs and outputs are stereo with the right channel inputs normalled to the left. -------------------------------------------------------------- 2 -... - Page 4 CNVRG ---------------------------------------------------------- IN DEPTH Master mix: Vu-meter peak monitoring: The three Master bus inputs are �rst mixed together. The vu-meter enables peak monitoring of the master This mix is then sent to the send output , which is mix using tri-color LEDs for the L and R channels. The colors correspond to speci�c levels with respect normalled in a way to mix with the return input .
- Page 5 CNVRG ---------------------------------------------------------- Outputs: Expansion I/O: There are four stereo outputs, three of which are Two additionnal stereo inputs and one stereo output can be added to Cnvrg using two 6-pin expansion accessible from the frontpanel: connectors on the back. - The main output is a Eurorack level output for the The output expansion connector Master mix that can be used for fu�her processing or...
-
Page 6: Specifications
CNVRG ---------------------------------------------------------- SPECIFICATIONS Compatible with Eurorack systems only Dimensions: Height: 3U (128.5mm) Power draw (typical): Width: 6HP (30mm) +12V: 75mA Depth: 29mm from the front of the panel to the -12V: 75mA back (including power cable connector); Power draw (max): 46mm overall from the tallest potentiometer to the +12V: 130mA back. -
Page 7: Warranty
CNVRG ---------------------------------------------------------- WARRANTY Cnvrg is covered by a 2-year warranty from the date of purchase. This warranty excludes damage caused by improper use of the module, such as, but not limited to connection to wrong power supply voltages, improper power cable or expansion cable connection, damage caused by mechanical stress (e.g.
Need help?
Do you have a question about the HALF-TIME CNVRG and is the answer not in the manual?
Questions and answers