Download Print this page

Boehringer Ingelheim Spiriva Respimat Instructions For Use

Advertisement

Quick Links

Spiriva® Respimat®
Solution for Inhalation
tiotropium
Instructions for Use
The Spiriva Respimat re-usable is an inhaler device that generates a slow moving mist for inhalation.
Read these Instructions for Use before you start using Spiriva Respimat (tiotropium bromide monohydrate) re-usable inhaler.
Children should use Spiriva Respimat with an adult's assistance.
You will need to use this inhaler only ONCE A DAY. Each time you use it take TWO PUFFS.
Mouthpiece
Air vents
Dose-release
button
Safety catch
Clear base
If not been used for more than 7 days release one puff towards the ground.
If not been used for more than 21 days repeat steps 4 to 6 until a cloud is visible. Then repeat steps 4 to 6 three
more times.
How to care for your Spiriva Respimat re-usable inhaler
Clean the mouthpiece including the metal part inside the mouthpiece with a damp cloth or tissue only, at least once a week.
Any minor discoloration in the mouthpiece does not affect your Spiriva Respimat re-usable inhaler performance.
If necessary, wipe the outside of your Spiriva Respimat re-usable inhaler with a damp cloth.
When to replace the inhaler
When you have used an inhaler with 6 cartridges, get a new Spiriva Respimat re-usable pack containing an inhaler.
Do not use the Respimat re-usable inhaler for more than one year, after having inserted the first cartridge.
Respimat®
Cap
Cartridge
Front
TWO
PUFFS
ONCE
DAILY
counter
Back
abcd
Cartridge
Dose
Indicator

Advertisement

loading
Need help?

Need help?

Do you have a question about the Spiriva Respimat and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Boehringer Ingelheim Spiriva Respimat

  • Page 1 When to replace the inhaler When you have used an inhaler with 6 cartridges, get a new Spiriva Respimat re-usable pack containing an inhaler. Do not use the Respimat re-usable inhaler for more than one year, after having inserted the first cartridge.
  • Page 2 Prepare for use Safety catch Clear base Remove clear base • Keep the cap closed. • Press the safety catch while pulling off the clear base with your other hand. Insert cartridge • Insert the cartridge into the inhaler. • Place the inhaler on a firm surface and push down firmly until it clicks into place.
  • Page 3 Air Vent • Close the cap until you use your inhaler again. When to replace the Spiriva Respimat cartridge The dose indicator shows how many puffs remain in the cartridge. 60 puffs remaining. Less than 10 puffs remaining. Obtain a new cartridge.
  • Page 4 Was the cap open when you replaced the cartridge? Close the cap, then replace the cartridge. Supplier Spiriva Respimat re-usable inhaler is supplied in Australia by: Boehringer Ingelheim Pty Limited ABN 52 000 452 308 Sydney, Australia www.boehringer-ingelheim.com.au Manufacturer Scan the QR code for a video demonstration.