Talking Products Talking Tins Red 40 seconds User Manual

Talking Tins Red 40 seconds – User Guide v1.0
Thank you for choosing Talking Products Ltd. We hope you enjoy using your Talking Tins and we are
here for support if you need any assistance. Please read these instructions carefully and retain for future
reference.
How to record a message
Pull the white tab on the rear side to activate the battery power. Hold the product in both hands with your
thumbs over the two record buttons.
Press down with your thumbs and the red light will illuminate to indicate that recording has begun. Speak
clearly into the microphone, at a distance of approximately 15cm, and release the buttons when you
have finished recording.
NOTE: Ensure the buttons are held down so that the red light remains on whilst you are recording. You
will hear a 'beep' sound to indicate recording has begun and then two 'beeps' to indicate recording has
finished.
How to playback a message
Press the black PLAY button once and release.
NOTE: Your message can be up to 40 seconds long and can be re-recorded as many times as you wish.
A new recorded message will replace the previous one.
NOTE: There is a LOCK switch located on the rear side to help you protect your message from
accidental erasure. The record buttons can be disabled by sliding this switch down to the LOCK
position.
NOTE: Your message will be preserved even when you replace the batteries or when the batteries are
depleted.