Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Rovin MMA014
- Page 1 MMA014 Inflatable Kayak INSTRUCTION MANUAL...
-
Page 3: Table Of Contents
CONTENTS General Information & Safety Instructions ...........4 Package Contents .................... 5 Inflation & Assembly ..................5 Valves ........................6 Assembly of Standard Fins ................. 7 Disassembly ......................7 Valve Maintenance ................... 8 Leak Detection....................8 Repair Kit ......................9 Specifications .....................11 Warranty Information ..................12... -
Page 4: General Information & Safety Instructions
GENERAL INFORMATION & SAFETY INSTRUCTIONS • This kayak is designed for inshore and calm water use. Use only during daylight hours and within 300m of shore. • Wearing a life jacket is strongly recommended. It is especially important that children and non-swimmers wear a personal flotation device at all times. -
Page 5: Package Contents
PACKAGE CONTENTS 1 X Kayak 1 x Manual 1 x Repair Kit WARNING: Before removing the kayak from the packaging, make sure that there are no sharp objects where the kayak will be inflated. Make sure all included parts are in the box. INFLATION &... -
Page 6: Valves
The outside temperature as well as the water influences the pressure of the kayak. Adjust the pressure accordingly: in cold weather the kayak loses pressure, while in warm the air will expand. VALVES The valves are pre-assembled, you can leave them installed permanently. Unscrew the cap then place the pump onto the valve to inflate. -
Page 7: Assembly Of Standard Fins
ASSEMBLY OF STANDARD FINS Remove the protective Insert the fin from the Position the safety tab located in the front into the groove. tab transversely to the groove by sliding it spoiler, until the locking forward. clip appears on the other side. -
Page 8: Valve Maintenance
VALVE MAINTENANCE When using for the first time, it is imperative to check the tightness of the valve before use. If an air leak is present at this location, please follow the instructions below. Open the cap and The valve consists of 3 Reposition the valve take the valve key parts, the top cap, the... -
Page 9: Repair Kit
Wipe the entire kayak with a Rinse and dry your kayak and mark sponge, bubbles will form where the the location of the leak with a pen leak is. or felt tip pen. REPAIR KIT Take 160 sandpaper, scissors, cotton cloth, acetone and the repair kit included. - Page 10 Wipe the entire area with sandpaper Use the glue and spread it over the as well as the patch, then clean with defined area of the board as well as a cloth dampened in acetone to the entire patch. Wait 2-3 mins. remove any dust.
-
Page 11: Specifications
SPECIFICATIONS Floor material: Dropstitch Tube material: Laminated PVC Length: 370 cm (+/- 3%) Width: 85 cm (+/- 3%) No of air chamber: Max weight: 210 kg Number of people: Tube recommended pressure: 3.5 PSI Floor recommended pressure: 8 PSI... -
Page 12: Warranty Information
WARRANTY INFORMATION Our product is guaranteed to be free from manufacturing defects for a period of 12 Months. If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for intended purpose.
Need help?
Do you have a question about the MMA014 and is the answer not in the manual?
Questions and answers