Click BOOSTER PACK Manual

Click BOOSTER PACK is the
add-on board for LaunchPad
from Texas Instruments
It features mikroBUS
socket, allowing developers to
use dozens of click
boards from mikroElektronika.
What are click
™
Click ™ boards are popular add-on boards in mikroBUS
form factor. Each one carries a specific functionality,
whether it is a communication layer, sensor, analog
input, storage module, etc. Click
in size and are easily integrated into target devices,
making them a great choice for fast prototyping.
Each comes with user manual and a set of examples.
®
® .
™ host
™ add-on
boards?
™ boards are compact
What is mikroBUS
mikroBUS ™ host connector consists of two 1x8
female headers containing pins to be most likely
used in the target add-on board. There are three
groups of communication pins: SPI, UART and I2C.
There are also single pins for PWM, Interrupt,
Analog input, Reset and Chip Select. Pinout contains
two power groups: +5V and GND on one header and
+3.3V and GND on the other 1x8 header.
mikroBUS ™ host connector perfectly fits into
standard breadboards.
™
AN - Analog pin
RST - Reset pin
CS - SPI Chip Select line
SCK - SPI Clock line
MISO - SPI Slave Output line
MOSI - SPI Slave Input line
+3.3V - VCC-3.3V Power line
GND - Reference Ground
?
™
PWM - PWM output line
INT - Hardware Interrupt line
RX - UART Receive line
TX - UART Transmit line
2
SCL - I C Clock line
2
SDA - I C Data line
+5V - VCC-5V Power line
GND - Reference Ground
for more information, please visit
www.mikroe.com