Subscribe to Our Youtube Channel
Related Manuals for Bosch WUU28T00FG
Summary of Contents for Bosch WUU28T00FG
- Page 1 Translated from Dutch to English - www.onlinedoctranslator.com Washing machine WUU28T00FG [NL] User manual and installation instructions...
-
Page 2: Table Of Contents
Refer to the Digital User's Guide for more information. Index 1 Safety..........4 7 Display ........21 1.1 General instructions ....4 8 Buttons ........24 1.2 Destination of the device rate ........4 9 Programs ........ 25 1.3 Restriction of users ..4 10 Accessories........ - Page 3 14 Child Lock ........ 33 14.1 Activating child lock ..33 14.2 Deactivating child lock..33 15 Basic Settings ....34 15.1 Overview of the basic settings ........34 15.2 Changing basic settings..35 16 Cleaning and maintenance ..35 16.1 Cleaning the drum ....
-
Page 4: Safety
NLSafety 1 Safety Observe the following safety regulations. 1.1 General instructions sRead this manual carefully. sKeep the operating instructions and product information for future reference. for use or for subsequent owners. sDo not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: sto wash machine-safe textiles and wool by hand... -
Page 5: Secure Installation
SafetyNL 1.4 Secure installation WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and use the device in accordance with the information on the type plate. ▶ Only connect the device to a mains supply with alternating current via a properly installed earthing socket. - Page 6 NLSafety ▶ If the power cord is too short and a longer power cord is not available, contact an electrical retailer to adjust the home installation. WARNING ‒ Risk of injury! The heavy weight of the device can cause injuries when lifted. ▶...
-
Page 7: Safer Use
SafetyNL If the appliance is moved by protruding parts, such as the loading door, the parts can break off. ▶ Do not move the appliance by protruding parts. CAUTION ‒ Risk of cutting! Sharp edges on the device can cause cuts if touched. ▶... - Page 8 NLSafety ▶ In the case of discarded appliances, remove the plug of the mains cable from the socket, then cut the mains cable and damage the lock of the appliance door so that the appliance door no longer closes. WARNING ‒ Risk of suffocation! Children can inhale or swallow small parts and choke.
-
Page 9: Safe Cleaning And Maintenance
SafetyNL CAUTION ‒ Risk of burns! The soap gets hot when washing at high temperatures. ▶ Do not touch the hot soapy water. CAUTION ‒ Risk of chemical burns! When opening the detergent drawer, detergent and care products may splash out of the appliance. - Page 10 NLSafety WARNING ‒ Risk of poisoning! Toxic fumes can be generated when cleaning agents containing solvents are used. ▶ Do not use solvent-based cleaning agents.
-
Page 11: Avoiding Material Damage
Avoid material damageNL Water pressure that is too low or too high can 2 Material damage interfere with the appliance function. avoid Make sure that the water pressure ▶ on the water supply system is at least 100 kPa (1 bar) and at most 1000 kPa (10 bar). -
Page 12: Environmental Protection And Saving
NLEnvironmental protection and saving Reduce washing temperature for 3 Environmental protection and lightly and normally soiled laundry. savings aAt low temperatures, it consumes device less energy. For light to normal soiling, lower 3.1 Disposing of the temperatures than those stated on packaging the care label are also sufficient. -
Page 13: Set-Up And Connection
Set up and connectNL remain on the device. The stains 4 Set up and connect disappear after the first wash. 4.1 Unpacking device The delivery consists of: s Washing machine sAccompanying documents s PAY ATTENTION! Transport protections Objects that remain in the drum and →... -
Page 14: Removing Transport Locks
NLSet up and connect Transport the device upright. 4.4 Removing transport locks ▶ installation site Requirements The device is secured for transport Holder The device with with transport locks at the rear of the locking lips → Page 29 device. to confirm. -
Page 15: Connecting The Device
Set up and connectNL Slide the 4 cover caps downwards. Remove the mains connection cable from the holder. Remove the 4 sleeves. Remark:To install the transport locks in the machine, reverse these steps in reverse order. 4.5 Connecting device Connect water supply hose Connect the water supply hose to the appliance. -
Page 16: Adjusting The Device
NLSet up and connect Connect the water inlet hose to the plastic stand the water drainage tap (26.4 mm = 3/4"). pipe with rubber feeding hose with run muff or a a bend → Page 29 floor drain fixate and gene. -
Page 17: Connecting The Appliance Electrically
Set up and connectNL To adjust the appliance, turn the Insert the mains plug of the appliance feet. Check the horizontal appliance's connecting cable into adjustment of the appliance with a a socket in the vicinity of the spirit level. appliance. -
Page 18: Getting To Know Your Device
NLGetting to know your device 5 Getting to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may differ, e.g. the color the vor Mains connection cable →... -
Page 19: Control Panel
Getting to know your deviceNL note in the program descriptions. Dosing aid for liquid detergent → "Programs", Page 25 → "Insert the dosing aid for liquid detergent", Page 31 Detergent compartment II: detergent for the main wash Detergent dispenser: fabric softener Detergent compartment I: detergent for prewash... -
Page 20: Before First Use
usage Fill powder detergent into 6 Before first use compartment II. B prepare the device for use use. 6.1 Start the wash cycle without laundry Your device has been thoroughly checked before leaving the factory. To remove any residual water, wash without any laundry the first time. -
Page 21: Display
DisplayNL 7 Display The display shows the current setting values, options or information texts. Example display indication name More information Indication 0:40 Expected program duration or remaining Program duration / remaining time of time of the program in hours and minutes. the program →... - Page 22 NLDisplay name More information Indication Start / Pause Start, cancel or pause slights up: the program is running and can be aborted or paused. sflashes: the program can be started or resumed. Wash Program status To rinse Program status Centrifuge Program status –...
- Page 23 DisplayNL name More information Indication voltage control Flashing: The program has been paused due to illegal undervoltages. The voltage is lesson system allowed again and the program continues. Remark:The program duration is extended. Door slights up: the door is locked and can not be opened.
- Page 24 NLTests 8 Keys The selection of the program settings depends on the program set. Knob Choice More information Start/Refill sstart Start, cancel or pause program. sCancel spause SpeedPerfect sactivate Activate or deactivate reduced program duration. sdeactivate Remark:The energy consumption is higher.
-
Page 25: Programs
ProgramsNL 9 Programs Remark:The care labels on the laundry give you additional information on program selection. Max. Program Description bela- thing (kg) Cotton Wash hard-wearing cotton, linen and blended fabrics. Also suitable as a shortened program for normally soiled laundry if you activate SpeedPerfect. Program setting: smax. - Page 26 NLPrograms Max. Program Description bela- thing (kg) Fast mix Wash textiles made of cotton, linen, synthetic materials and blended fabrics. Suitable for lightly soiled laundry. Program setting: smax. 60 °C smax. 1400 rpm Delicate/Silk Wash delicate, washable textiles made of silk, viscose and synthetics.
- Page 27 ProgramsNL Max. Program Description bela- thing (kg) smax. 1400 rpm shirts Wash non-iron shirts and blouses made of cotton, linen, synthetic and blended fabrics. Remark:Wash shirts and blouses made of silk or delicate materials in the Delicate/Silk programme. Program setting: smax.
- Page 28 NLPrograms Max. Program Description bela- thing (kg) – Cleaning and maintenance of the drum. Use the drum cleaning gene program in the following cases: sbefore first use swith frequent washing with a washing temperature of 40°C and below safter a long absence Use a bleach-containing powder detergent.
-
Page 29: Accessories
accessoriesNL 10 Accessories Use only original accessories. These are adapted to the device. Remark:Some accessories are available in other colours. Contact the → "Customer Service", page 50 . Usage Order number Cold water or Aquastop WMZ2381 Extension water supply water inlet hose feeding hose lengthen (2.50 m). -
Page 30: Detergent And Care Ginger
NLDetergent and laundry care product swash small or sensitive items in 1 3 The Operation in es- a laundry net sentie slarge and small laundry items wash together sWash laundry with stains immediately 13.1 Switch on device sLaundry with dried stains Required:The device is correctly set pre-treat and wash several times up and connected. -
Page 31: Detergent
ServiceNL Insert the detergent drawer. Requirements sThe laundry is prepared and 13.6 Using the dosing aid for sorted. → "Laundry", Page 29 liquid detergent sThe drum is empty. know Open the door. You can use a dosing aid in the Place the laundry in the drum. -
Page 32: Starting The Program
NLService sKeep the directions for washing onReady inuntil the desired program agent and laundry care agent end time appears on the display. → Page 30 at. onStart/Refillto press. Pull out the detergent drawer. The changed program end time is Fill with detergent. →... -
Page 33: Resume Program At Rinse Hold
Child lockNL – Start the program at a high Wipe the rubber sleeve dry and temperatureTo rinse. remove any foreign objects. – Start the program at a high water levelCentrifuge or select a suitable program for draining. → "Programs", Page 25 Remove the laundry. -
Page 34: Basic Settings
NLBasic settings 15 Basic Settings You can configure the basic settings of your device according to your needs. 15.1 Overview of the basic settings Program- Description Basic setting Where the ling position Signal 0 (off) Adjust the volume of the signal 1 (soft) after the program has ended. -
Page 35: Changing Basic Settings
Cleaning and maintenanceNL 15.2 Changing basic settings 16 Cleaning and care loves Set the program selector to position 1. Carefully clean and maintain your appliance to ensure that it continues to work properly for a long time. 16.1 Cleaning the drum CAREFULLY Risk of injury! Permanent washing at low... -
Page 36: Cleaning The Drain Pump
NLCleaning and maintenance Pull out the insert from bottom to Clean the opening for the detergent top. drawer. Clean and dry the detergent drawer Slide the detergent drawer into the and insert with water and a brush. appliance. 16.3 Cleaning the drain pump Clean the drain pump in the event of malfunctions, e.g. - Page 37 Cleaning and maintenanceNL Place a sufficiently large Press the stopper back on. container under the opening. Clamp the drain hose in the holder. Remove the drain hose from the holder. CAUTION - Risk of burns!The Cleaning the drain pump soap gets hot when washing at high Required:The drain pump is empty.
- Page 38 NLCleaning and maintenance As there may still be residual Install the pump cover. water in the pump, carefully Check that the pump cover unscrew the lid. components are correctly Large impurities can cause the assembled. filter element to get stuck in the pump housing.
- Page 39 Cleaning and maintenanceNL Select a suitable program for draining. → "Programs", Page 25...
-
Page 40: Troubleshooting
NLTroubleshooting 17 Troubleshooting You can remedy minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. ▶... - Page 41 TroubleshootingNL Cause and Troubleshooting Malfunction "E:36 / -10" Remove any unauthorized extensions from the ▶ water drain hose. → "Connecting the device", page 15 Pump cover is not fully screwed in. Make sure that the pump cover is screwed into the ▶...
- Page 42 NLTroubleshooting Cause and Troubleshooting Malfunction Voltage symbol Undervoltage can cause a program extension. undershoot (double No solution possible. bad point). burns. Undervoltage can cause a program extension. No solution possible. burns. Temperature is too high. Wait for the temperature to drop. ▶...
- Page 43 TroubleshootingNL Cause and Troubleshooting Malfunction Close the door. Program does not start. To start the program, pressStart/Refill. Child lock is activated. Deactivate child lock. ▶ → "Deactivate child lock", page 33 Ready inis activated. Check ifReady inis activated. ▶ → "Buttons", Page 24 Laundry is wedged in the door.
- Page 44 NLTroubleshooting Cause and Troubleshooting Malfunction Resume the program byCentrifugeorDrainto choose Washing water is not ▶ pumped out. and pressStart/Refillto push. → "Resume program at rinse hold", page 33 Water drain hose is connected too high. Install the water drain hose at a maximum height of 1 ▶...
- Page 45 TroubleshootingNL Cause and Troubleshooting Malfunction The program sequence is electronically optimized. This The program duration may lead to changes in the program duration. changes during the wash cycle. No error - no action required. ▶ The imbalance control system eliminates the imbalance by distributing the laundry several times.
- Page 46 NLTroubleshooting Cause and Troubleshooting Malfunction strong foam Detergent dosage is too high. ming. ▶ Immediate measure: mix a tablespoon of fabric softener with 0.5 l of water and pour this mixture into the left compartment (not for outdoor, sportswear and down textiles).
- Page 47 TroubleshootingNL Cause and Troubleshooting Malfunction Loud noise during Secure the device feet. ▶ → "Adjusting the device", Page 16 spinning. Transport protections have not been removed. → "Remove transport locks", page 14 . ▶ Clapping, clattering A foreign object has entered the pump. →...
- Page 48 NLTroubleshooting Cause and Troubleshooting Malfunction Spin result is Start the programCentrifuge. ▶ not to satisfaction- Unbalance control system compensates for ness. The laundry is imbalance through reduced spin speed. too wet / too damp. Redistribute the laundry in the drum. ▶...
-
Page 49: Restarting The Appliance
Transport, storage and disposalNL Disassemble the hoses. 17.1 Emergency release unlock door 18.2 Installing transport locks Required:The drain pump is empty. → Page 36 To avoid transport damage, secure 1. ATTENTION!Running water can the device with transport locks before lead to material damage. transport. -
Page 50: Disposal Of Your Old Appliance
NLcustomer service 18.4 Disposal of your old chemical equipment (waste electrical and electronic appliance equipment - WEEE). Environmentally friendly disposal The directive sets the allows valuable raw materials to be framework for the take- reused. back valid in the EU and disposal of old appliances. - Page 51 customer serviceNL son the inside of the bottom holding valve. son the back of the device honeycomb. In order to quickly find your device data and the service telephone numbers, you can write down the data.
-
Page 52: Consumption Values
NLConsumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The specified values for other programs asEco 40-60are only guide values and have been determined in accordance with the applicable standard EN60456. Pro- Program bela- Water-... - Page 53 Technical dataNL Maximum load 8.0kg Length of the 150 cm thing water supply feeding hose 220-240V, mains voltage 50 Hz Length of the 150 cm water drain hose 10 A Minimum input installation fuse Length of the 160 cm mains connection cable Rated power 2300W gene...
- Page 56 Contact data of all countries are listed in the attached service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 Munich, GERMANY www.bosch-home.com A Bosch Company * 9001773934* 9001773934(021019)
Need help?
Do you have a question about the WUU28T00FG and is the answer not in the manual?
Questions and answers