Table of Contents
Advertisement
Getting Started
Installation
Note: Do not connect/install the TEW-680MB to your network until instructed to do so.
Make sure your network adapter settings are set to obtain an IP address automatically.
1.
Connect one end of the provided RJ-45 network cable to one of the TEW-680MB's LAN
ports. Connect the other end of the cable to your computer's network port.
2.
Connect the Power Adapter to the TEW-680MB and then to a power outlet (EU Versions
will have a power button on the back. Push the power button to the "On" position. ). Wait
30 seconds for the TEW-680MB to boot up.
3.
Plug in the power adapter and verify the Power & Ethernet LEDs are light.
12
Hide quick links:
Advertisement
Table of Contents
