Advertisement
Quick Links
Advertisement
Summary of Contents for KMW KM-SL502R-S
- Page 1 Installation Manual KM-SL502R-S...
- Page 2 Lock Structure Installation Notes Installation Notes...
-
Page 3: Installation Steps
Installation Steps 1. Open holes on the door according to the bore hole diagram, then install the mortise correctly: 2. Tighten the 4 screws on the plate to fix the mortise:... - Page 4 3. Adjust the smart lock handle direction according to the door opening direction: 4. Install the connecting screw stud on the front lock, then put the spring and square rod into the handle hole:...
- Page 5 5. Pass the connecting wire through the wire hole, and insert the square rod on the front lock directly into the square rod hole on the mortise, making the front lock panel close to the door: 6. Connect the front lock wire and the back lock wire well, and tuck the extra wires into the door hole, then cover the back lock panel, making it close to the door surface:...
- Page 6 7. Take out the M5 screws from the accessory bag and align them with the screw studs of the front lock, do not tighten them yet: 8. Adjust the upper, lower, left and right position of the front lock and back lock panel, and test the flexibility of the handle and privacy knob, then tighten the screws:...
- Page 7 9. Install the battery and cover the battery cover. Smart lock installed successfully: 10. Press the front lock and back lock handle, twist the privacy knob and the mechanical key, and then check whether all parts are connected well and smoothly:...
Need help?
Do you have a question about the KM-SL502R-S and is the answer not in the manual?
Questions and answers